Supported editions for this feature: Enterprise Plus; Education Standard and Education Plus. Compare your edition
To use Google Workspace Client-side encryption (CSE) for Gmail, you need to enable the Gmail API and give it access to your entire organization. Then, for each user, you need to use the Gmail API to upload an S/MIME (Secure/Multipurpose internet Mail Extensions) certificate (public key) and private key metadata to Gmail. If you're using an encryption key service, you'll also need to encrypt (or "wrap") users' private key metadata using your key service.
At any time, you can switch to a different key service by uploading new S/MIME certificates and private key metadata encrypted by your new service.
About S/MIME
S/MIME is a widely accepted, industry standard protocol for digitally signing and encrypting emails to ensure message integrity and security. Gmail CSE relies on the S/MIME 3.2 IETF standard to send and receive secure MIME data. S/MIME requires email senders and recipients to have their X.509 certificates trusted by Gmail.
Note: Alternatively, you can use S/MIME without the additional layer of encryption and privacy that CSE provides. Use this alternative only if don't need to prevent Google servers from decrypting your data with CSE. For details, go to Turn on hosted S/MIME for message encryption.
Before you begin
Make sure you've completed the following steps:
- Choose a key service.
- Connect to your identity provider (IdP).
- Set up your external key service or hardware key encryption.
- Assign a key service or hardware key encryption to organizational units or groups.
If you're using multiple key services, make sure they're assigned to the appropriate organizational units or configuration groups.
Set up the Gmail API
Note: Use of the APIs requires programming knowledge.
- Create a new GCP project. For details, go to Creating and managing projects.
Note the project ID: You'll use it to grant the API domain-wide access.
- Go the Google API Console and enable the Gmail API for the new project. For details, go to Enabling an API in your Google Cloud project.
- In the Google Cloud console, go to the Service accounts page and create a domain-wide service account. For details, go to Create and manage service accounts.
- Create a service account private key, and save the key to a JSON file on to your local system, such as
svc_acct_creds.json
. This file contains the credentials you'll use when setting up Gmail for users. For details, go to Create and manage service account keys.
For this step, you'll use the service account you created to give the Gmail API edit access to all your users.
- Follow the instructions for Control API access with domain-wide delegation.
- Enter the following when prompted:
Client ID: Client ID of the service account created in Step 2 above.
OAuth scopes:
gmail.settings.readonly
and eithergmail.settings.basic
orgmail.settings.sharing
Turn on Gmail CSE for users
Turn on CSE for Gmail for the organizational units or groups. For details, go to Turn client-side encryption on or off.
Note: For organizational units, you can set all emails (compose, reply, and forward) to be encrypted by default. User can still turn off encryption if needed. Requires having the Assured Controls or Assured Controls Plus add-on.
Set up CSE S/MIME certificates for users
After you've set up Gmail API and turned on Gmail CSE for users in the Admin console, you can set up CSE S/MIME certificates and private key metadata for your users.
Step 1: Prepare S/MIME certificates and private key metadataFor each user who will use Gmail CSE to either send or receive emails:
Using a certificate authority (CA), generate an S/MIME public/private key pair with a certificate chain. The S/MIME leaf certificate must include the user’s primary Gmail address as a subject name or SAN extension subject.
You can do either of the following:
- Use a CA root certificate trusted by Google: For a list of root certificates, go to CA certificates trusted by Gmail for S/MIME.
- Use a CA that's not trusted by Google: For example, to use your own CA, you can add its root certificate in the Admin console. For details, go to Manage trusted certificates for S/MIME.
Note: If you use a CA that's not trusted by Google, and users will send client-side encrypted emails outside your organization, the receiver must also trust the CA.
Use your key service to encrypt, or "wrap," the S/MIME private keys' metadata. Contact your key service to do this or follow the instructions they provide.
If you're using hardware key encryption—Make sure you skip this step and don't wrap private key metadata for any users who will use hardware key encryption. In this case, wrapping the metadata isn't needed because users' private keys for Gmail reside on their smart cards. Requires having the Assured Controls or Assured Controls Plus add-on.
Use the Gmail API to upload each user’s public key S/MIME certificate chain and private key metadata to Gmail and set them as the preferred keys for the users by creating an identity.
Compete the following steps for each user, using the private key file you downloaded when creating a domain-wide service account for authentication:
- Upload the certificate chain and private key metadata, using the Gmail API call
keypairs.create
. - Enable the keypair for the user's primary email address, using the Gmail API call
identities.create
.The
identities.create
call requires the key pair ID that's returned in the response body of thekeypairs.create
call.Note: Enabling the key pair for a user's email address:
- Creates a CSE identity that's authorized to send email from the user's account.
- Configures Gmail to use the private key metadata to sign outgoing CSE mail.
- Publishes the certificate to a shared domain-wide repository so other CSE users in your organization can encrypt messages sent to this user.
To complete these steps, use a script that interfaces with the Gmail API. You can do either of the following:
- Write your own script.
- Use the Python sample script that Google provides. For instructions, go to Use Google's Python script to upload users' certificates and wrapped keys to Gmail below.
Note: This script applies only for users who'll use a key service to encrypt Gmail content. For any users who will use hardware key encryption, you'll need to create a different script to upload their unwrapped private key metadata.
After you upload the certificates, it can take up to 24 hours for them to be available in Gmail, although it usually happens much faster.
To complete Step 3 above, you can use the Python script that Google provides instead of writing your own script.
Note: This script asks for the 3 scopes you can use to grant the Gmail API domain-wide accesss (listed earlier on this page): gmail.settings.readonly
, gmail.settings.basic
, and gmail.settings.sharing
. To use the script, you can either enable all three scopes or remove the scope you're not using from the script.
Download the script
Download the Python script package (.zip) to your computer (Mac, Linux, or Windows), and extract the files into your working directory.
Create a virtual environment and install modules
Using a command line from your working directory, enter the following commands:
python3 -m venv cli_env
source cli_env/bin/activate
pip install -r requirements.txt
Invoke the script
python cse_cmd.py -h
Upload user's certificates and keys
Step 1: Create a directory for storing all wrapped private keys
- For example, you might create the directory
$root/wrapped_keys
. - The filename for each wrapped private key must be the user's full email address with the
.wrap
extension. For example:$root/wrapped_keys/[email protected]
- Make sure the wrapped private key file has a JSON object with two required fields:
{
'kacls_url': 'url of the key service configured in the Admin console',
'wrapped_private_key': 'wrapped private key bytes'
}
Step 2: Create a directory for storing all certificates
- Certificates need to be in the P7 PEM format, so, you might create the directory
$root/p7pem_certs
. - Make sure the certificate file contains the full chain to the root certificate authority (CA).
- The filename for each certificate must be the user's full email address with the
.p7pem
extension. For example:$root/p7pem_certs/[email protected]
If you have a P7B file: You can use the following openssl comment to convert it to the P7 PEM format:
openssl pkcs7 -inform DER -in {old_name.p7b} -outform PEM -out {new_name.p7pem}
Step 3: Upload users' key pairs and identities
For this step, you'll need the JSON file containing the credentials for the service account, which you saved to your computer in Step 2: Create a service account above.
The easiest way to upload users' key pairs and identities is to run the insert
command. Note that each command must have an argument—for example:
python cse_cmd.py insert
--creds $root/svc_acct_creds.json
--inkeydir $root/wrapped_keys
--incertdir $root/p7pem_certs
Alternatively, you can do the following for each user:
- Run
insert_keypair
, and note the keypair ID. - Run
insert_identity
using that keypair ID.
You can also get the keypair ID by running list_keypair
command.
Step 4: Verify users have CSE key pairs and identities
Make sure users have valid key pairs and identities in Gmail by running the following commands for each user:
list_keypair
list_identity
To switch to another key service for Gmail CSE
If you want to switch to a different key service for Gmail CSE, repeat steps 2 and 3 under Set up Gmail CSE for users above, using your new key service to wrap the private keys.
Note: Uploading new certificates for users doesn't migrate content to the new key service. However, users can continue to access emails encrypted with the previous certificates and private key metadata wrapped by the old key service.
Migrate messages to Gmail as client-side encrypted emails
Now that Gmail CSE is set up, you can optionally import messages. For details, see Migrate messages to Gmail as client-side encrypted emails.