EVOC 20 PS output parameters in Logic Pro for iPad
The Output section controls the type of signal, stereo width, and level of signal that is sent from EVOC 20 PS. The Output section also has an integrated ensemble effect processor.
Output parameters
Output Level knob and field: Set the overall volume of the output signal.
Out buttons: Choose the signal that is sent to the main outputs.
Voc(oder): Choose to hear the vocoder effect.
Syn(thesis): Choose to hear only the synthesizer signal.
Ana(lysis): Choose to hear only the analysis signal.
Note: The last two settings are mainly useful for monitoring purposes.
Stereo knob and field: Distribute the output signals of the Synthesis section filter bands in the stereo field.
At the 0 position to the left, the outputs of all bands are centered.
At the centered position, the outputs of all bands ascend from left to right.
At the Full position to the right, the bands are output—alternately—to the left and right channels.
Ensemble slider/switch: Turn the ensemble effect on or off and determine the type of sound. The three slider/switch positions from top to bottom:
II: Choose for a fuller and richer sound.
I: Choose for a special chorus effect.
Off: Choose to turn the ensemble effect off.
Download this guide: PDF