Bass Amp Designer Parametric EQ in Logic Pro for iPad
Bass Amp Designer offers an additional Graphic EQ or Parametric EQ that is independent from the Main EQ. The Parametric EQ provides two EQ bands:
Low-Mid: Controls frequencies in the low and low-mid range. Use the LMF Gain, Freq, and Q parameters to adjust this frequency band.
High-Mid: Controls frequencies in the high and high-mid range. the HMF Gain, Freq, and Q parameters to adjust this frequency band.
Note: The additional EQ defaults to a pre-Compressor position in the signal flow.
![Figure. Bass Amp Designer Parametric EQ parameters.](https://help.apple.com/assets/666A34BC79C468390202D0B9/666A34C7A16BCE32A1063641/en_US/a3ab89f5710e907b88f3bcd7fe4d86e8.png)
Parametric EQ parameters
Graphic/Parametric EQ On/Off button: Turn the parametric EQ on or off.
Type pop-up menu: Choose the Graphic EQ or Parametric EQ.
Graphic and Parametric EQ parameter settings are retained when switching between EQ types and when the additional EQ is turned off. This allows quick AB comparisons.
Position pop-up menu: Choose whether the additional EQ is inserted before or after—pre or post—the Compressor module in the signal path.
Note: This parameter is relevant only if the Compressor is turned on.
LMF/HMF Gain knobs: Adjust the amount of cut or boost applied to the frequency range set with the corresponding Freq knob.
LMF/HMF Freq knobs: Set the frequency range you want to cut or boost with the corresponding Gain knob.
LMF/HMF Q knobs: Set the width of the band surrounding the frequency set with the corresponding Freq knob.
The lower the Q knob value, the wider the band, which means that more frequencies are affected. The higher the Q knob value, the narrower the band, which means that only the frequencies nearest to the frequency set with the Freq knob are affected.
Download this guide: PDF