Logic Pro User Guide for iPad
-
- What is Logic Pro?
- Working areas
- Work with function buttons
- Work with numeric values
-
- Intro to tracks
- Create tracks
- Create tracks using drag and drop
- Choose the default region type for a software instrument track
- Select tracks
- Duplicate tracks
- Reorder tracks
- Rename tracks
- Change track icons
- Change track colors
- Use the tuner on an audio track
- Show the output track in the Tracks area
- Delete tracks
- Edit track parameters
- Start a Logic Pro subscription
- How to get help
-
- Intro to recording
-
- Before recording software instruments
- Record software instruments
- Record additional software instrument takes
- Record to multiple software instrument tracks
- Record multiple MIDI devices to multiple tracks
- Record software instruments and audio simultaneously
- Merge software instrument recordings
- Spot erase software instrument recordings
- Replace software instrument recordings
- Capture your most recent MIDI performance
- Route MIDI internally to software instrument tracks
- Record with Low Latency Monitoring mode
- Use the metronome
- Use the count-in
-
- Intro to arranging
-
- Intro to regions
- Select regions
- Cut, copy, and paste regions
- Move regions
- Remove gaps between regions
- Delay region playback
- Trim regions
- Loop regions
- Repeat regions
- Mute regions
- Split and join regions
- Stretch regions
- Separate a MIDI region by note pitch
- Bounce regions in place
- Change the gain of audio regions
- Create regions in the Tracks area
- Convert a MIDI region to a Session Player region or a pattern region
- Rename regions
- Change the color of regions
- Delete regions
-
- Intro to chords
- Add and delete chords
- Select chords
- Cut, copy, and paste chords
- Move and resize chords
- Loop chords on the Chord track
- Edit chords
- Work with chord groups
- Use chord progressions
- Change the chord rhythm
- Choose which chords a Session Player region follows
- Analyze the key signature of a range of chords
- Create fades on audio regions
- Extract vocal and instrumental stems with Stem Splitter
- Access mixing functions using the Fader
-
- Intro to Step Sequencer
- Use Step Sequencer with Drum Machine Designer
- Record Step Sequencer patterns live
- Step record Step Sequencer patterns
- Load and save patterns
- Modify pattern playback
- Edit steps
- Edit rows
- Edit Step Sequencer pattern, row, and step settings in the inspector
- Customize Step Sequencer
-
- Effect plug-ins overview
-
- Instrument plug-ins overview
-
- ES2 overview
- Interface overview
-
- Modulation overview
- Use the Mod Pad
-
- Vector Envelope overview
- Use Vector Envelope points
- Use Vector Envelope solo and sustain points
- Set Vector Envelope segment times
- Vector Envelope XY pad controls
- Vector Envelope Actions menu
- Vector Envelope loop controls
- Vector Envelope point transition shapes
- Vector Envelope release phase behavior
- Use Vector Envelope time scaling
- Modulation source reference
- Via modulation source reference
-
- Sample Alchemy overview
- Interface overview
- Add source material
- Save a preset
- Edit mode
- Play modes
- Source overview
- Synthesis modes
- Granular controls
- Additive effects
- Additive effect controls
- Spectral effect
- Spectral effect controls
- Filter module
- Low, bandpass, and highpass filters
- Comb PM filter
- Downsampler filter
- FM filter
- Envelope generators
- Mod Matrix
- Modulation routing
- Motion mode
- Trim mode
- More menu
- Sampler
- Studio Piano
- Copyright
Modulation pedals in Logic Pro for iPad
Flange Factory
Flange Factory is a deluxe flanging effect with precise sound control features.
Rate knob: Set the modulation speed in hertz, or synchronized with the host tempo when you turn on the Sync button.Sync button: Turn on to synchronize the Rate value with the host tempo.
- Depth knob: Set the strength of the effect.
Shape knob: Alter the shape of the modulation waveform.
Curve knob: Smooth the waveform shape.
Wave buttons: Switch between modulation waveforms.
Manual knob: Set a delay time between the source and effect signals. This can result in flanger-chorus effects, or in edgier-sounding modulations.
Reso knob: Determine the amount of cutoff frequency resonance.
High knob: Set the high frequency cutoff.
Low knob: Set the low frequency cutoff.
- Mix knob: Set the level balance between the flanging and source signals.
Heavenly Chorus
Heavenly Chorus is a rich, sweet-sounding chorus effect that thickens the sound.
- Rate knob: Set the modulation speed in hertz, or synchronized with the host tempo when you turn on the Sync button.
Sync button: Turn on to synchronize the Rate value with the host tempo.
- Depth knob: Set the strength of the effect.
Feedback knob: Set the amount of effect output sent to the effect input, thickening the sound or leading to intermodulations.
Density knob: Set the ratio between the original and effect signals.
Bright button: Set at the top position to apply a fixed frequency internal EQ. Bottom position bypasses the EQ.
Phase Tripper
Phase Tripper is a simple phasing effect.
- Rate knob: Set the modulation speed in hertz, or synchronized with the host tempo when you turn on the Sync button.
Sync button: Turn on to synchronize the Rate value with the host tempo.
- Depth knob: Set the strength of the effect.
Feedback knob: Set the amount of effect output sent to the effect input, changing the tonal color, making the sweeping effect more pronounced, or both.
Phaze 2
Phaze 2 is a flexible dual-phaser effect.
Phaser 1/2 Rate knobs: Set the modulation speed in hertz, or synchronized with the host tempo when you turn on the Sync button.
Phaser 1/2 Sweep Floor/Ceiling knobs: Set the lower and upper limits of the frequency range that is swept.
Phaser 1/2 Order knobs: Switch between algorithms, with higher (even) numbers resulting in a heavier phasing effect. Odd order numbers result in more subtle comb-filtering effects.
Phaser 1/2 Feedback knobs: Set the amount of effect output sent to the effect input, changing the tonal color, making the phasing effect more pronounced, or both.
Phaser 1/2 Tone knobs: Rotate left to increase the amount of lowpass filtering. Rotate right to increase the amount of highpass filtering.
- Output Mix knob: Set the level balance between each phaser.
Sync button: Turn on to synchronize the Rate values of both LFOs with the host tempo.
Retro Chorus
Retro Chorus is a subtle vintage chorus effect.
- Rate knob: Set the modulation speed in hertz, or synchronized with the host tempo when you turn on the Sync button.
- Depth knob: Set the strength of the effect.
Sync button: Turn on to synchronize the Rate value with the host tempo.
Robo Flanger
Robo Flanger is a flexible flanging effect.
- Rate knob: Set the modulation speed in hertz, or synchronized with the host tempo when you turn on the Sync button.
Sync button: Turn on to synchronize the Rate value with the host tempo.
- Depth knob: Set the strength of the effect.
Feedback knob: Set the amount of effect output sent to the effect input, changing the tonal color, making the flanging effect more pronounced, or both.
Manual knob: Set a delay time between the source and effect signals. This can result in flanger-chorus effects, or in metallic-sounding modulations, particularly when used with high Feedback values.
Roswell Ringer
Roswell Ringer is a ring modulation effect that can make incoming audio sound metallic or unrecognizable, and can deliver tremolos, brighten up signals, and more. See Ringshifter for information on ring modulation.
- Freq Coarse knob: Set the frequency shift value.
Freq Fine knob: Fine-tune the frequency shift.
Type buttons: Set the frequency curve to linear—with 12 notes per octave—or exponential.
Feedback knob: Set the amount of effect output sent to the effect input, changing the tonal color, making the effect more pronounced, or both.
- Mix knob: Set the level balance between the source and effect signals.
Roto Phase
Roto Phase is a phaser effect that adds movement to, and alters the phase of, the signal.
- Rate knob: Set the modulation speed in hertz, or synchronized with the host tempo when you turn on the Sync button.
Sync button: Turn on to synchronize the Rate value with the host tempo.
- Intensity knob: Set the strength of the effect.
Type buttons: Vintage enables a fixed-frequency internal EQ. Modern disables the EQ.
Spin Box
Spin Box emulates a Leslie speaker cabinet, commonly used with the Hammond B3 organ.
Cabinet knob: Switch between speaker box types.
Fast Rate knob: Set the maximum modulation speed; this applies only when the Fast button is active.
- Speed buttons: Determine speaker behavior: Slow rotates the speaker slowly. Fast rotates the speaker quickly, up to the maximum speed set with the Fast Rate knob. Brake stops speaker rotation.
Response knob: Set the amount of time required for the rotor to reach its maximum and minimum speed.
Drive knob: Set the amount of input gain, which introduces distortion.
Bright button: Turn on to mimic a forward-facing speaker horn in the cabinet, resulting in a brighter tone.
The Vibe
The Vibe is a vibrato/chorus effect based on the Scanner vibrato effect unit found in the Hammond B3 organ.
- Rate knob: Set the modulation speed in hertz, or synchronized with the host tempo when you turn on the Sync button.
Sync button: Turn on to synchronize the Rate value with the host tempo.
- Depth knob: Set the strength of the effect.
Type knob: Choose from three vibrato (V1–3) or chorus (C1–3) variations.
Total Tremolo
Total Tremolo is a flexible tremolo effect—modulation of the signal level.
- Rate knob: Set the modulation speed in hertz, or synchronized with the host tempo when you turn on the Sync button.
- Depth knob: Set the strength of the effect.
Sync button: Turn on to synchronize the Rate value with the host tempo.
Wave knob: Set the (continuously variable) modulation waveform shape.
Smoothing knob: Change the waveform shape.
Volume knob: Set the post-tremolo gain.
Speed Up button: Hold down to gradually accelerate the current Rate value to the maximum possible value.
Slow Down button: Hold down to gradually reduce the current Rate value to the minimum possible value.
Speed buttons: Set a Normal, Half, or Double speed for the current Rate value.
Trem-O-Tone
Trem-O-Tone is a simple tremolo effect—modulation of the signal level.
- Rate knob: Set the modulation speed in hertz, or synchronized with the host tempo when you turn on the Sync button.
Sync button: Turn on to synchronize the Rate value with the host tempo.
- Depth knob: Set the strength of the effect.
Level knob: Set the post-tremolo gain.
Download this guide: PDF