Testing

To confirm that your integration works correctly, simulate transactions without moving any money using special values in test mode.

Test cards let you simulate several scenarios:

• Successful payments by card brand or country
• Card errors due to declines, fraud, or invalid data
• Disputes and refunds
• Authentication with 3D Secure and PINs

Testing non-card payments works similarly. Each payment method has its own special values. Because of rate limits, we don’t recommend using test mode to load-test your integration. Instead, see our documentation on load testing.

How to use test cards

Any time you work with a test card, use test API keys in all API calls. This is true whether you’re serving a payment form to test interactively or writing test code.

Testing interactively

When testing interactively, use a card number, such as 4242 4242 4242 4242. Enter the card number in the Dashboard or in any payment form.

• Use a valid future date, such as 12/34.
• Use any three-digit CVC (four digits for American Express cards).
• Use any value you like for other form fields.

Testing a form interactively with the test card number 4242 4242 4242 4242

Test code

When writing test code, use a PaymentMethod such as pm_card_visa instead of a card number. We don’t recommend using card numbers directly in API calls or server-side code, even in test mode. If you do use them, your code might not be PCI-compliant when you go live. By default, a PaymentMethod isn’t attached to a Customer.

curl https://api.stripe.com/v1/payment_intents \
  -u "
sk_test_4eC39HqLyjWDarjtT1zdp7dc
:" \
  -d amount=500 \
  -d currency=gbp \
  -d payment_method=pm_card_visa

Most integrations don’t use Tokens anymore, but we make test Tokens such as tok_visa available if you need them.

When you’re ready to take your integration live, replace your test publishable and secret API keys with live ones. You can’t process live payments if your integration is still using your test API keys.

Cards by brand

To simulate a successful payment for a specific card brand, use test cards from the following list.

Most Cartes Bancaires and eftpos cards are co-branded with either Visa or Mastercard. The test cards in the following table simulate successful payments with co-branded cards.

Cards by country

To simulate successful payments from specific countries, use test cards from the following sections.

Declined payments

To test your integration’s error-handling logic by simulating payments that the issuer declines for various reasons, use test cards from this section. Using one of these cards results in a card error with the given error code and decline code.

Fraud prevention

Stripe’s fraud prevention system, Radar, can block payments when they have a high risk level or fail verification checks. You can use the cards in this section to test your Radar settings. You can also use them to test how your integration responds to blocked payments.

Each card simulates specific risk factors. Your Radar settings determine which risk factors cause it to block a payment. Blocked payments result in card errors with an error code of fraud.

Invalid data

To test errors resulting from invalid data, provide invalid details. You don’t need a special test card for this. Any invalid value works. For instance:

• invalid_expiry_month: Use an invalid month, such as 13.
• invalid_expiry_year: Use a year up to 50 years in the past, such as 95.
• invalid_cvc: Use a two-digit number, such as 99.
• incorrect_number: Use a card number that fails the Luhn check, such as 4242424242424241
  .

Disputes

To simulate a disputed transaction, use the test cards in this section. Then, to simulate winning or losing the dispute, provide winning or losing evidence.

Evidence

To simulate winning or losing the dispute, respond with one of the evidence values from the table below.

• If you respond using the API, pass the value from the table as uncategorized_text.
• If you respond in the Dashboard, enter the value from the table in the Additional information field. Then, click Submit evidence.

Refunds

In live mode, refunds are asynchronous: a refund can appear to succeed and later fail, or can appear as pending at first and later succeed. To simulate refunds with those behaviors, use the test cards in this section. (With all other test cards, refunds succeed immediately and don’t change status after that.)

You can cancel a card refund only by using the Dashboard. In live mode, you can cancel a card refund within a short but nonspecific period of time. Test mode simulates that period by allowing you to cancel a card refund within 30 minutes.

Available balance

To send the funds from a test transaction directly to your available balance, use the test cards in this section. Other test cards send funds from a successful payment to your pending balance.

3D Secure authentication

3D Secure requires an additional layer of authentication for credit card transactions. The test cards in this section allow you to simulate triggering authentication in different payment flows.

Only cards in this section effectively test your 3D Secure integration by simulating defined 3DS behavior, such as a challenge flow or an unsupported card. Other Stripe testing cards might still trigger 3DS, but we return attempt_acknowledged to bypass the additional steps since 3DS testing isn’t the objective for those cards.

Authentication and setup

To simulate payment flows that include authentication, use the test cards in this section. Some of these cards can also be set up for future payments, or have already been.

Support and availability

Stripe requests authentication when required by regulation or when triggered by your Radar rules or custom code. Even if authentication is requested, it can’t always be performed—for instance, the customer’s card might not be enrolled, or an error might occur. Use the test cards in this section to simulate various combinations of these factors.

3D Secure mobile challenge flows

In a mobile payment, several challenge flows for authentication—where the customer has to interact with prompts in the UI—are available. Use the test cards in this section to trigger a specific challenge flow for test purposes. These cards aren’t useful in browser-based payment forms or in API calls. In those environments, they work but don’t trigger any special behavior. Because they’re not useful in API calls, we don’t provide any PaymentMethod or Token values to test with.

Captcha challenge

To prevent fraud, Stripe might display a captcha challenge to the user on the payment page. Use the test cards below to simulate this flow.

Payments with PINs

Use the test cards in this section to simulate successful in-person payments where a PIN is involved. There are many other options for testing in-person payments, including a simulated reader and physical test cards. See Test Stripe Terminal for more information.

Event destinations

To test event destinations, choose one of these two options:

1. Perform actions in test mode that send legitimate events to your event destination. For example, to trigger the charge.succeeded event, you can use a test card that produces a successful charge.
2. Trigger events using the Stripe CLI or using Stripe for Visual Studio Code.

Rate limits

If your requests in test mode begin to receive 429 HTTP errors, make them less frequently. These errors come from our rate limiter, which is stricter in test mode than in live mode.

We don’t recommend load testing your integration using the Stripe API in test mode. Because the load limiter is stricter in test mode, you might see errors that you wouldn’t see in production. See load testing for an alternative approach.

Non-card payments

Any time you use a test non-card payment method, use test API keys in all API calls. This is true whether you’re serving a payment form you can test interactively or writing test code.

Different payment methods have different test procedures:

Link

Currently, Link only works with credit cards, debit cards, and qualified US bank account purchases. Link requires domain registration.

You can create test mode accounts for Link using any valid email address. The following table shows the fixed one-time passcode values that Stripe accepts for authenticating test mode accounts:

Multiple funding sources

As Stripe adds additional funding source support, you don’t need to update your integration. Stripe automatically supports them with the same transaction settlement time and guarantees as card and bank account payments.

Redirects

To test your integration’s redirect-handling logic by simulating a payment that uses a redirect flow (for example, iDEAL), use a supported payment method that requires redirects.

To create a test PaymentIntent that either succeeds or fails:

1. Navigate to the payment methods settings in the Dashboard and enable a supported payment method by clicking Turn on in test mode.
2. Collect payment details.
3. Submit the payment to Stripe.
4. Authorize or fail the test payment.

Make sure that the page (corresponding to return_url) on your website provides the status of the payment.