Skip to content

nodejs/package-examples

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

2 Commits
 
 
 
 

Repository files navigation

Node.js package shipping patterns

Note

This repository is currently under construction. It's meant to replace the sections in the Node.js package documentation for documenting package shipping patterns, the pros and cons, and guidelines for CJS to ESM migration.

Previous documents from package.md in Node.js API documentation

Note

This is currently copied from the old package.md as-is. A lot of the information has been outdated since Node.js started to support require(esm). We are still working on an update. Do not follow the documentation below for new packages for the time being.

Prior to the introduction of support for ES modules in Node.js, it was a common pattern for package authors to include both CommonJS and ES module JavaScript sources in their package, with package.json ["main"][] specifying the CommonJS entry point and package.json "module" specifying the ES module entry point. This enabled Node.js to run the CommonJS entry point while build tools such as bundlers used the ES module entry point, since Node.js ignored (and still ignores) the top-level "module" field.

Node.js can now run ES module entry points, and a package can contain both CommonJS and ES module entry points (either via separate specifiers such as 'pkg' and 'pkg/es-module', or both at the same specifier via Conditional exports). Unlike in the scenario where top-level "module" field is only used by bundlers, or ES module files are transpiled into CommonJS on the fly before evaluation by Node.js, the files referenced by the ES module entry point are evaluated as ES modules.

Dual package hazard

When an application is using a package that provides both CommonJS and ES module sources, there is a risk of certain bugs if both versions of the package get loaded. This potential comes from the fact that the pkgInstance created by const pkgInstance = require('pkg') is not the same as the pkgInstance created by import pkgInstance from 'pkg' (or an alternative main path like 'pkg/module'). This is the “dual package hazard,” where two versions of the same package can be loaded within the same runtime environment. While it is unlikely that an application or package would intentionally load both versions directly, it is common for an application to load one version while a dependency of the application loads the other version. This hazard can happen because Node.js supports intermixing CommonJS and ES modules, and can lead to unexpected behavior.

If the package main export is a constructor, an instanceof comparison of instances created by the two versions returns false, and if the export is an object, properties added to one (like pkgInstance.foo = 3) are not present on the other. This differs from how import and require statements work in all-CommonJS or all-ES module environments, respectively, and therefore is surprising to users. It also differs from the behavior users are familiar with when using transpilation via tools like Babel or esm.

Writing dual packages while avoiding or minimizing hazards

First, the hazard described in the previous section occurs when a package contains both CommonJS and ES module sources and both sources are provided for use in Node.js, either via separate main entry points or exported paths. A package might instead be written where any version of Node.js receives only CommonJS sources, and any separate ES module sources the package might contain are intended only for other environments such as browsers. Such a package would be usable by any version of Node.js, since import can refer to CommonJS files; but it would not provide any of the advantages of using ES module syntax.

A package might also switch from CommonJS to ES module syntax in a breaking change version bump. This has the disadvantage that the newest version of the package would only be usable in ES module-supporting versions of Node.js.

Every pattern has tradeoffs, but there are two broad approaches that satisfy the following conditions:

  1. The package is usable via both require and import.
  2. The package is usable in both current Node.js and older versions of Node.js that lack support for ES modules.
  3. The package main entry point, e.g. 'pkg' can be used by both require to resolve to a CommonJS file and by import to resolve to an ES module file. (And likewise for exported paths, e.g. 'pkg/feature'.)
  4. The package provides named exports, e.g. import { name } from 'pkg' rather than import pkg from 'pkg'; pkg.name.
  5. The package is potentially usable in other ES module environments such as browsers.
  6. The hazards described in the previous section are avoided or minimized.

Approach #1: Use an ES module wrapper

Write the package in CommonJS or transpile ES module sources into CommonJS, and create an ES module wrapper file that defines the named exports. Using Conditional exports, the ES module wrapper is used for import and the CommonJS entry point for require.

// ./node_modules/pkg/package.json
{
  "type": "module",
  "exports": {
    "import": "./wrapper.mjs",
    "require": "./index.cjs"
  }
}

The preceding example uses explicit extensions .mjs and .cjs. If your files use the .js extension, "type": "module" will cause such files to be treated as ES modules, just as "type": "commonjs" would cause them to be treated as CommonJS. See Enabling ESM.

// ./node_modules/pkg/index.cjs
exports.name = 'value';
// ./node_modules/pkg/wrapper.mjs
import cjsModule from './index.cjs';
export const name = cjsModule.name;

In this example, the name from import { name } from 'pkg' is the same singleton as the name from const { name } = require('pkg'). Therefore === returns true when comparing the two names and the divergent specifier hazard is avoided.

If the module is not simply a list of named exports, but rather contains a unique function or object export like module.exports = function () { ... }, or if support in the wrapper for the import pkg from 'pkg' pattern is desired, then the wrapper would instead be written to export the default optionally along with any named exports as well:

import cjsModule from './index.cjs';
export const name = cjsModule.name;
export default cjsModule;

This approach is appropriate for any of the following use cases:

  • The package is currently written in CommonJS and the author would prefer not to refactor it into ES module syntax, but wishes to provide named exports for ES module consumers.
  • The package has other packages that depend on it, and the end user might install both this package and those other packages. For example a utilities package is used directly in an application, and a utilities-plus package adds a few more functions to utilities. Because the wrapper exports underlying CommonJS files, it doesn't matter if utilities-plus is written in CommonJS or ES module syntax; it will work either way.
  • The package stores internal state, and the package author would prefer not to refactor the package to isolate its state management. See the next section.

A variant of this approach not requiring conditional exports for consumers could be to add an export, e.g. "./module", to point to an all-ES module-syntax version of the package. This could be used via import 'pkg/module' by users who are certain that the CommonJS version will not be loaded anywhere in the application, such as by dependencies; or if the CommonJS version can be loaded but doesn't affect the ES module version (for example, because the package is stateless):

// ./node_modules/pkg/package.json
{
  "type": "module",
  "exports": {
    ".": "./index.cjs",
    "./module": "./wrapper.mjs"
  }
}

Approach #2: Isolate state

A package.json file can define the separate CommonJS and ES module entry points directly:

// ./node_modules/pkg/package.json
{
  "type": "module",
  "exports": {
    "import": "./index.mjs",
    "require": "./index.cjs"
  }
}

This can be done if both the CommonJS and ES module versions of the package are equivalent, for example because one is the transpiled output of the other; and the package's management of state is carefully isolated (or the package is stateless).

The reason that state is an issue is because both the CommonJS and ES module versions of the package might get used within an application; for example, the user's application code could import the ES module version while a dependency requires the CommonJS version. If that were to occur, two copies of the package would be loaded in memory and therefore two separate states would be present. This would likely cause hard-to-troubleshoot bugs.

Aside from writing a stateless package (if JavaScript's Math were a package, for example, it would be stateless as all of its methods are static), there are some ways to isolate state so that it's shared between the potentially loaded CommonJS and ES module instances of the package:

  1. If possible, contain all state within an instantiated object. JavaScript's Date, for example, needs to be instantiated to contain state; if it were a package, it would be used like this:

    import Date from 'date';
    const someDate = new Date();
    // someDate contains state; Date does not

    The new keyword isn't required; a package's function can return a new object, or modify a passed-in object, to keep the state external to the package.

  2. Isolate the state in one or more CommonJS files that are shared between the CommonJS and ES module versions of the package. For example, if the CommonJS and ES module entry points are index.cjs and index.mjs, respectively:

    // ./node_modules/pkg/index.cjs
    const state = require('./state.cjs');
    module.exports.state = state;
    // ./node_modules/pkg/index.mjs
    import state from './state.cjs';
    export {
      state,
    };

    Even if pkg is used via both require and import in an application (for example, via import in application code and via require by a dependency) each reference of pkg will contain the same state; and modifying that state from either module system will apply to both.

Any plugins that attach to the package's singleton would need to separately attach to both the CommonJS and ES module singletons.

This approach is appropriate for any of the following use cases:

  • The package is currently written in ES module syntax and the package author wants that version to be used wherever such syntax is supported.
  • The package is stateless or its state can be isolated without too much difficulty.
  • The package is unlikely to have other public packages that depend on it, or if it does, the package is stateless or has state that need not be shared between dependencies or with the overall application.

Even with isolated state, there is still the cost of possible extra code execution between the CommonJS and ES module versions of a package.

As with the previous approach, a variant of this approach not requiring conditional exports for consumers could be to add an export, e.g. "./module", to point to an all-ES module-syntax version of the package:

// ./node_modules/pkg/package.json
{
  "type": "module",
  "exports": {
    ".": "./index.cjs",
    "./module": "./index.mjs"
  }
}

About

Repository documenting package shipping patterns

Resources

License

Code of conduct

Security policy

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published