research-article

Stress relief: improving structural strength of 3D printable objects

Authors:

Radomír MěchAuthors Info & Claims

ACM Transactions on Graphics (TOG), Volume 31, Issue 4

Article No.: 48, Pages 1 - 11

https://doi.org/10.1145/2185520.2185544

Published: 01 July 2012 Publication History

Abstract

The use of 3D printing has rapidly expanded in the past couple of years. It is now possible to produce 3D-printed objects with exceptionally high fidelity and precision. However, although the quality of 3D printing has improved, both the time to print and the material costs have remained high. Moreover, there is no guarantee that a printed model is structurally sound. The printed product often does not survive cleaning, transportation, or handling, or it may even collapse under its own weight. We present a system that addresses this issue by providing automatic detection and correction of the problematic cases. The structural problems are detected by combining a lightweight structural analysis solver with 3D medial axis approximations. After areas with high structural stress are found, the model is corrected by combining three approaches: hollowing, thickening, and strut insertion. Both detection and correction steps are repeated until the problems have been eliminated. Our process is designed to create a model that is visually similar to the original model but possessing greater structural integrity.

Supplementary Material

JPG File (tp132_12.jpg)

Download
11.67 KB

ZIP File (a48-stava.zip)

Supplemental material.

Download
36.08 MB

MP4 File (tp132_12.mp4)

Download
16.39 MB

References

[1]

Allaire, G., and Jouve, F. 2008. Minimum stress optimal design with the level set method. Engineering Analysis with Boundary Elements 32, 11, 909--918.

[2]

Allaire. 2002. A level-set method for shape optimization. Comptes Rendus Mathematique 334, 12, 1125--1130.

[3]

Allaire, G. 2004. Structural optimization using sensitivity analysis and a level-set method. Journal of Computational Physics 194, 1, 363--393.

Digital Library

[4]

Andrews, J., Joshi, P., and Carr, N. 2011. A linear variational system for modelling from curves. Comput. Graph. Forum.

[5]

Balasubramanian, R., Xu, L., Brook, P. D., Smith, J. R., and Matsuoka, Y. 2010. Human-guided grasp measures improve grasp robustness on physical robot. In ICRA, 2294--2301.

[6]

Butcher, J. C. 2008. Numerical Methods for Ordinary Differential Equations. John Wiley and Sons, Ltd.

[7]

Cohen, J., Varshney, A., Manocha, D., Turk, G., Weber, H., Agarwal, P., Brooks, F., and Wright, W. 1996. Simplification envelopes. In Proceedings of the 23rd annual conference on Computer graphics and interactive techniques, ACM, New York, NY, USA, SIGGRAPH '96, 119--128.

Digital Library

[8]

Dey, T. K., and Zhao, W. 2003. Approximating the medial axis from the voronoi diagram with a convergence guarantee. Algorithmica 38 (October), 179--200.

Digital Library

[9]

Engineering Handbook, 2011. Rapid Prototyping -- Processes. http://engineershandbook.com/RapidPrototyping/rpprocesses.htm.

[10]

Fu, H., Cohen-Or, D., Dror, G., and Sheffer, A. 2008. Upright orientation of man-made objects. ACM Trans. Graph. 27 (August), 42:1--42:7.

Digital Library

[11]

Golub, G. H., and Welsch, J. H. 1967. Calculation of gauss quadrature rules. Tech. rep., Stanford, CA, USA.

Digital Library

[12]

Hart, J. C., Baker, B., and Michaelraj, J. 2003. Structural simulation of tree growth and response. The Visual Computer 19, 2--3, 151--163.

[13]

Haslinger, J., AND Mäkinen, R. A. E. 2003. Introduction to Shape Optimization: Theory, Approximation, and Computation. SIAM, Philadelphia.

Digital Library

[14]

Hornung, A., and Kobbelt, L. 2006. Robust reconstruction of watertight 3d models from non-uniformly sampled point clouds without normal information. In Proc. of Symposium on Geometry Processing, Eurographics Association, 41--50.

Digital Library

[15]

Hughes, T. J. R. 1987. The Finite Element Method: Linear Static and Dynamic Finite Element Analysis. Prentice-Hall.

[16]

Jirasek, C., Prusinkiewicz, P., and Moulia, B. 2000. Integrating biomechanics into developmental plant models expressed using 1-systems. In Proc. Plant Biomechanics, 615--624.

[17]

Kinoshita, H., Bäckström, L., Flanagan, J. R., and Johansson, R. S. 1997. Tangential torque effects on the control of grip forces when holding objects with a precision grip. Journal of Neurophysiology 78, 3, 1619--1630.

[18]

Liu, R., Burschka, D., and Hirzinger, G. 2007. On the way to water-tight mesh. In Proc. of ISPRS.

[19]

Liu, L., Chambers, E. W., Letscher, D., and Ju, T. 2010. A simple and robust thinning algorithm on cell complexes. Comput. Graph. Forum 29, 7, 2253--2260.

[20]

Osher, S., and Sethian, J. A. 1988. Fronts propagating with curvature dependent speed. Journal of Computational Physics 79, 12--49.

Digital Library

[21]

Peng, J., Kristjansson, D., and Zorin, D. 2004. Interactive modeling of topologically complex geometric detail. In ACM SIGGRAPH 2004 Papers, ACM, New York, NY, USA, SIGGRAPH '04, 635--643.

Digital Library

[22]

Schmidt, R., and Singh, K. 2010. meshmixer: an interface for rapid mesh composition. In ACM SIGGRAPH 2010 Talks, SIGGRAPH '10, ACM, 6:1--6:1.

Digital Library

[23]

Shapeways, 2011. 3D printing in 4 simple steps. http://www.shapeways.com/about/how_does_it_work.

[24]

Shapeways, 2011. Things to keep in mind when designing for 3D printing. http://www.shapeways.com/tutorials/things-to-keep-in-mind.

[25]

Shewchuk, J. R. 2001. Delaunay refinement algorithms for triangular mesh generation. Computational Geometry: Theory and Applications 22, 1--3.

Digital Library

[26]

Si, H., 2011. Tetgen: A quality tetrahedral mesh generator and a 3D delaunay triangulator.

[27]

Telea, A., and Jalba, A. 2011. Voxel-based assessment of printability of 3d shapes. In Proc. of Mathematical morphology and its applications to image and signal processing, SpringerVerlag, Berlin, Heidelberg, ISMM, 393--404.

Digital Library

[28]

von Mises, R. 1913. Mechanik der festen körper im plastisch-deformablen zustand. Nachrichten von der Gesellschaft der Wissenschaften zu Göttingen, Mathematisch-Physikalische Klasse 1913, 582--592.

[29]

Whiting, E., Ochsendorf, J., and Durand, F. 2009. Procedural modeling of structurally-sound masonry buildings. ACM Trans. Graph. 28, 5, 112.

Digital Library

[30]

Z Corporation, 2011. Architectural Design Guide - Printing 3D Architectural Models. http://crl.ap.buffalo.edu/digitalworkshop/zcorp/pdfs/archdesguide.pdf.

Cited By

Asghar ARashid MHanif MBoukhris IChen ZSaqib MArshad QRosaiah PAli SHussain I(2025)Advancements in MXene-based 3D printing-based technologiesChemical Engineering Journal10.1016/j.cej.2025.159811(159811)Online publication date: Jan-2025
https://doi.org/10.1016/j.cej.2025.159811
Montes Maestre JDu YHinchet RCoros SThomaszewski B(2024)FlexScale: Modeling and Characterization of Flexible Scaled SheetsACM Transactions on Graphics10.1145/365817543:4(1-14)Online publication date: 19-Jul-2024
https://dl.acm.org/doi/10.1145/3658175
Yu DXiao CLau MFu H(2024)Sketch2Stress: Sketching With Structural Stress AwarenessIEEE Transactions on Visualization and Computer Graphics10.1109/TVCG.2023.334211930:10(6851-6865)Online publication date: 1-Oct-2024
https://dl.acm.org/doi/10.1109/TVCG.2023.3342119
Show More Cited By

Index Terms

Stress relief: improving structural strength of 3D printable objects

Recommendations

Fundamental characteristics of printed gelatin utilizing micro 3D printer

Gelatin is useful for biofabrication, because it can be used for cell scaffolds and it has unique properties. Therefore, we attempted to fabricate biodevices of gelatin utilizing micro 3D printer which is able to print with high precision. However, it ...
Semitransparent mask technique for relief type surface topographies

Semitransparent mask photolithography can be used for the generation of relief type surfaces with only a single photolithographic exposure. An electron beam lithography process for the fabrication of the photomasks employed in this technique is ...
3D printed PEGDA microstructures for gelatin scaffold integration and neuron differentiation

Three dimensional (3D) printing techniques can be used for scaffold fabrication but the most of them are limited by resolution and material choice. To bypass these limitations, we developed an approach by combining conventional 3D printing and freeze-...

Comments

Information & Contributors

Information

Published In

cover image ACM Transactions on Graphics

ACM Transactions on Graphics Volume 31, Issue 4

July 2012

935 pages

ISSN:0730-0301

EISSN:1557-7368

DOI:10.1145/2185520

Issue’s Table of Contents

Copyright © 2012 ACM.

Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, or republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. Request permissions from [email protected]

Publisher

Association for Computing Machinery

New York, NY, United States

Publication History

Published: 01 July 2012

Published in TOG Volume 31, Issue 4

Permissions

Request permissions for this article.

Request Permissions

Check for updates

Author Tags

Qualifiers

Research-article

Contributors

Other Metrics

View Article Metrics

Bibliometrics & Citations

Bibliometrics

Article Metrics

256
Total Citations
View Citations
3,736
Total Downloads

Downloads (Last 12 months)157
Downloads (Last 6 weeks)5

Reflects downloads up to 26 Jan 2025

Other Metrics

View Author Metrics

Citations

Cited By

Asghar ARashid MHanif MBoukhris IChen ZSaqib MArshad QRosaiah PAli SHussain I(2025)Advancements in MXene-based 3D printing-based technologiesChemical Engineering Journal10.1016/j.cej.2025.159811(159811)Online publication date: Jan-2025
https://doi.org/10.1016/j.cej.2025.159811
Montes Maestre JDu YHinchet RCoros SThomaszewski B(2024)FlexScale: Modeling and Characterization of Flexible Scaled SheetsACM Transactions on Graphics10.1145/365817543:4(1-14)Online publication date: 19-Jul-2024
https://dl.acm.org/doi/10.1145/3658175
Yu DXiao CLau MFu H(2024)Sketch2Stress: Sketching With Structural Stress AwarenessIEEE Transactions on Visualization and Computer Graphics10.1109/TVCG.2023.334211930:10(6851-6865)Online publication date: 1-Oct-2024
https://dl.acm.org/doi/10.1109/TVCG.2023.3342119
Dong YZuo QGu XYuan WZhao ZDong ZBo LHuang Q(2024)GPLD3D: Latent Diffusion of 3D Shape Generative Models by Enforcing Geometric and Physical Priors2024 IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR)10.1109/CVPR52733.2024.00014(56-66)Online publication date: 16-Jun-2024
https://doi.org/10.1109/CVPR52733.2024.00014
Singh SSingh AKapil SDas M(2024)Generation of continuous and sparse space filling toolpath with tailored density for additive manufacturing of biomimeticsComputer-Aided Design10.1016/j.cad.2024.103718173(103718)Online publication date: Aug-2024
https://doi.org/10.1016/j.cad.2024.103718
Schmeier GTröger CKwon YSachau D(2023)Predicting Failure of Additively Manufactured Specimens with HolesMaterials10.3390/ma1606229316:6(2293)Online publication date: 13-Mar-2023
https://doi.org/10.3390/ma16062293
Lipkowitz GKrishna NCoates IShaqfeh EDesimone J(2023)Printing atom-efficiently: faster fabrication of farther unsupported overhangs by fluid dynamics simulationProceedings of the 8th ACM Symposium on Computational Fabrication10.1145/3623263.3623354(1-14)Online publication date: 8-Oct-2023
https://dl.acm.org/doi/10.1145/3623263.3623354
Zhang ZBrandt CJouve JWang YChen TPauly MPanetta J(2023)Computational Design of Flexible Planar MicrostructuresACM Transactions on Graphics10.1145/361839642:6(1-16)Online publication date: 5-Dec-2023
https://dl.acm.org/doi/10.1145/3618396
Coros SThomaszewski BNoris GSueda SForberg MSumner RMatusik WBickel B(2023)Computational Design of Mechanical CharactersSeminal Graphics Papers: Pushing the Boundaries, Volume 210.1145/3596711.3596799(839-850)Online publication date: 1-Aug-2023
https://dl.acm.org/doi/10.1145/3596711.3596799
Tang PCoros SThomaszewski B(2023)Beyond Chainmail: Computational Modeling of Discrete Interlocking MaterialsACM Transactions on Graphics10.1145/359211242:4(1-12)Online publication date: 26-Jul-2023
https://dl.acm.org/doi/10.1145/3592112
Show More Cited By

View Options

Login options

Check if you have access through your login credentials or your institution to get full access on this article.

Full Access

Get this Article

View options

PDF

View or Download as a PDF file.

eReader

View online with eReader.

Figures

Tables

Media

View Issue’s Table of Contents