Paper
5 May 2016 Development of Tm:fiber laser-pumped Ho:YLF laser
Author Affiliations +
Abstract
A 2-micron Ho:YLF laser end-pumped by 1.94-micron Tm:fiber laser was developed. A ring resonator oscillator of 3 m length and amplifier system was adopted. The laser was operated at high repetition rates of 200-5000 Hz in room temperature. The amplifier outputs were about 7.4W in CW and more than 6 Win Q-switch operation of repetition rates more than 500 Hz. This laser was developed to be used for coherent wind and CO2 measurements. Then, injection seeding was applied to the ring resonator and single mode laser emission was obtained. The laser was used for Doppler wind lidar measurements and wind profiles were obtained.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kohei Mizutani, Shoken Ishii, Kazuhiro Asai, and Atsushi Sato "Development of Tm:fiber laser-pumped Ho:YLF laser", Proc. SPIE 9879, Lidar Remote Sensing for Environmental Monitoring XV, 987903 (5 May 2016); https://doi.org/10.1117/12.2224692
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser development

Oscillators

Wind measurement

Carbon dioxide lasers

Optical amplifiers

Resonators

Amplifiers

Back to Top