<calc-keyword>

The <calc-keyword> CSS data type represents well-defined constants such as e and pi. Rather than require authors to manually type out several digits of these mathematical constants or calculate them, a few of them are provided directly by CSS for convenience.

Syntax

The <calc-keyword> type defines numeric constants that can be used in CSS math functions.

Values

e

The base of the natural logarithm, approximately equal to 2.7182818284590452354.

pi

The ratio of a circle's circumference to its diameter, approximately equal to 3.1415926535897932.

infinity & -infinity

An infinite value, used to indicate the largest/smallest possible value.

NaN

A value representing "Not a Number" canonical casing.

Notes

Serializing the arguments inside calc() follows the IEEE-754 standard for floating point math which means there's a few cases to be aware of regarding constants like infinity and NaN:

  • Dividing by zero will return positive or negative infinity depending on the sign of the numerator.

  • Adding, subtracting or multiplying infinity to anything will return infinity unless it produces NaN (see below).

  • Any operation with at least one NaN argument will return NaN. This means 0 / 0, infinity / infinity, 0 * infinity, infinity + (-infinity), and infinity - infinity will all return NaN.

  • Positive and negative zero are possible values (0⁺ and 0⁻). This has the following effects:

    • Multiplication or division that produces zero with exactly one negative argument (-5 * 0 or 1 / (-infinity)) or negative result from combinations in the other math functions will return 0⁻.
    • 0⁻ + 0⁻ or 0⁻ - 0 will return 0⁻. All other additions or subtractions that would produce a zero will return 0⁺.
    • Multiplying or dividing 0⁻ with a positive number (including 0⁺) will return a negative result (either 0⁻ or -infinity), while multiplying or dividing 0⁻ with a negative number will return a positive result.

Examples of how these rules apply are shown in the Infinity, NaN, and division by zero section.

Note: It's rare to need to use infinity as an argument in calc(), but it can be used to avoid hardcoded "magic numbers" or making sure a certain value is always larger than another value. It may be useful if you need to make it obvious that a property has "the largest possible value" for that data type.

Formal syntax

<calc-keyword> = 
e |
pi |
infinity |
-infinity |
NaN

Description

Mathematical constants can only be used inside CSS math functions for calculations. Math constants are not CSS keywords, but if they are used outside of a calculation, they're treated like any other keyword. For example:

  • animation-name: pi; refers to an animation named "pi", not the pi numeric constant.
  • line-height: e; is invalid, but line-height: calc(e); is valid.
  • rotate(1rad * pi); won't work because rotate() is not a math function. Use rotate(calc(1rad * pi));

In math functions, <calc-keyword> values are evaluated as <number> values, therefore e and pi act as numeric constants.

Both infinity and NaN are slightly different, they are considered as degenerate numeric constants. While not technically numbers, they act as <number> values, so to get an infinite <length>, for example, requires an expression like calc(infinity * 1px).

The infinity and NaN values are included mostly to make serialization simpler and more obvious, but can be used to indicate a "largest possible value", since an infinite value is clamped to the allowed range. It's rare for this to be reasonable, but when using infinity its much simpler than just putting an enormous number in a stylesheet or hardcoding magic numbers.

All constants are case-insensitive except for NaN, which makes calc(Pi), calc(E) and calc(InFiNiTy) valid:

e
-e
E
pi
-pi
Pi
infinity
-infinity
InFiNiTy
NaN

The following are all invalid:

nan
Nan
NAN

Examples

Using e and pi in calc()

The following example shows how to use e inside calc() to rotate an element with an exponentially-increasing angle. The second box shows how to use pi inside a sin() function.

html
<div id="wrapper">
  <div class="container">
    <div id="e"></div>
    <input type="range" min="0" max="7" step="0.01" value="0" id="e-slider" />
    <label for="e-slider">e:</label>
    <span id="e-value"></span>
  </div>
  <div class="container">
    <div id="pi"></div>
    <input type="range" min="0" max="1" step="0.01" value="0" id="pi-slider" />
    <label for="pi-slider">pi:</label>
    <span id="pi-value"></span>
  </div>
</div>
js
// sliders
const eInput = document.querySelector("#e-slider");
const piInput = document.querySelector("#pi-slider");
// spans for displaying values
const eValue = document.querySelector("#e-value");
const piValue = document.querySelector("#pi-value");

eInput.addEventListener("input", function () {
  e.style.transform = "rotate(calc(1deg * pow(" + this.value + ", e)))";
  eValue.textContent = e.style.transform;
});

piInput.addEventListener("input", function () {
  pi.style.rotate = "calc(sin(" + this.value + " * pi) * 100deg)";
  piValue.textContent = pi.style.rotate;
});

Infinity, NaN, and division by zero

The following example shows the computed value of the width property when dividing by zero, followed by how serialization with different calc() constants look when viewed in the console:

html
<div></div>
css
div {
  height: 50px;
  background-color: red;
  width: calc(1px / 0);
}
js
const div = document.querySelector("div");
console.log(div.offsetWidth); // 17895698 (infinity clamped to largest value for width)

function logSerializedWidth(value) {
  div.style.width = value;
  console.log(div.style.width);
}

logSerializedWidth("calc(1px / 0)"); // calc(infinity * 1px)
logSerializedWidth("calc(1px / -0)"); // calc(-infinity * 1px)

logSerializedWidth("calc(1px * -infinity * -infinity)"); // calc(infinity * 1px)
logSerializedWidth("calc(1px * -infinity * infinity)"); // calc(-infinity * 1px)

logSerializedWidth("calc(1px * (NaN + 1))"); // calc(NaN * 1px)

Specifications

No specification found

No specification data found for css.types.calc-keyword.
Check for problems with this page or contribute a missing spec_url to mdn/browser-compat-data. Also make sure the specification is included in w3c/browser-specs.

Browser compatibility

BCD tables only load in the browser

See also