International Journal of Computer Integrated Manufacturing, Volume 26

Volume 26, Numbers 1-2, 2013

Special Issue: Collaborative Networks as Modern Industrial Organisations: Real Case Studies

• 
  David Romero, Ricardo J. Rabelo, Arturo Molina:
  Collaborative Networks as Modern Industrial Organisations: Real Case Studies. 1-2
• 
  Cheol-Han Kim, Jeongsoo Lee, Kwangsoo Kim, Jae Yeol Lee, Kwangyeol Ryu:
  A collaborative design framework for the Korean automotive parts industry. 3-18
• 
  Timothy Singleton, Kathryn Cormican:
  The influence of technology on the development of partnership relationships in the Irish construction industry. 19-28
• 
  Ovidiu Noran:
  Collaborative networks in the tertiary education industry sector: a case study. 29-40
• 
  Stefano A. Saetta, Lorenzo Tiacci, Luca Cagnazzo:
  The innovative model of the Virtual Development Office for collaborative networked enterprises: the GPT network case study. 41-54
• 
  Antonio Volpentesta, Salvatore Ammirato:
  Alternative agrifood networks in a regional area: a case study. 55-66
• 
  Verónica Pazos Corella, Ricardo Chalmeta-Rosaleñ, David Martínez-Simarro:
  SCIF-IRIS framework: a framework to facilitate interoperability in supply chains. 67-86
• 
  Naoufel Cheikhrouhou, Michel Pouly, Garikoitz Madinabeitia:
  Trust categories and their impacts on information exchange processes in vertical collaborative networked organisations. 87-100
• 
  Luis Maia Carneiro, António Lucas Soares, Rui Patrício, Américo Lopes Azevedo, Jorge Pinho de Sousa:
  Case studies on collaboration, technology and performance factors in business networks. 101-116
• 
  Janaina Macke, Rolando Vargas Vallejos, Kadígia Faccin, Denise Genari:
  Social capital in collaborative networks competitiveness: the case of the Brazilian Wine Industry Cluster. 117-124
• 
  Ahm Shamsuzzoha, Timo Kankaanpaa, Luis Maia Carneiro, Ricardo Almeida, Andrea Chiodi, Rosanna Fornasiero:
  Dynamic and collaborative business networks in the fashion industry. 125-139
• 
  Yan Lu, Hervé Panetto, Yihua Ni, Xinjian Gu:
  Ontology alignment for networked enterprise information system interoperability in supply chain environment. 140-151
• 
  António Grilo, Aneesh Zutshi, Ricardo Jardim-Gonçalves, Adolfo Steiger-Garção:
  Construction collaborative networks: the case study of a building information modelling-based office building project. 152-165
• 
  Ricardo Jardim-Gonçalves, Carlos Agostinho, João Sarraipa, António Grilo, João Pedro Mendonça:
  Reference framework for enhanced interoperable collaborative networks in industrial organisations. 166-182

Volume 26, Number 3, 2013

Articles

• 
  Thomas Penide, Didier Gourc, Hervé Pingaud, Philippe Peillon:
  Innovative process engineering: a generic model of the innovation process. 183-200
• 
  Mehdi Foumani, Kouroush Jenab:
  Analysis of flexible robotic cells with improved pure cycle. 201-215
• 
  Kan Wang, Chuck Zhang, Jack Su, Ben Wang, Ying Hung:
  Optimisation of composite manufacturing processes with computer experiments and Kriging methods. 216-226
• 
  Somkiat Tangjitsitcharoen, Voraman Boranintr:
  Integration of in-process monitoring and statistical process control of surface roughness on CNC turning process. 227-236
• 
  Jheng-Dan Huang, Michael H. Hu:
  Two-stage solution approach for supplier selection: A case study in a Taiwan automotive industry. 237-251
• 
  Fehmi H'Mida, Pierre Lopez:
  Multi-site scheduling under production and transportation constraints. 252-266
• 
  Claire Palmer, Nitishal Chungoora, Robert I. M. Young, George Gunendran, Zahid Usman, Keith Case, Jenny A. Harding:
  Exploiting unified modelling language (UML) as a preliminary design tool for Common Logic-based ontologies in manufacturing. 267-283

Volume 26, Number 4, 2013

Articles

• 
  Rakesh Kumar Phanden, Ajai Jain, Rajiv Verma:
  An approach for integration of process planning and scheduling. 284-302
• 
  Mathias Jönsson, Carin Andersson, Jan-Eric Ståhl:
  Conditions for and development of an information technology-support tool for manufacturing cost calculations and analyses. 303-315
• 
  Yang Yu, Jiafu Tang, Wei Sun, Yong Yin, Ikou Kaku:
  Combining local search into non-dominated sorting for multi-objective line-cell conversion problem. 316-326
• 
  Xinwei Zhang, Guillaume Auriol, Hakki Eres, Claude Baron:
  A prescriptive approach to qualify and quantify customer value for value-based requirements engineering. 327-345
• 
  Lina A. Huertas, Emma L. Rosamond, Paul P. Conway, Andrew A. West:
  Sustainable production in the UK: a tool to support printed circuit assembly (PCA) manufacturing. 346-364
• 
  Rafiq Ahmad, Stéphane Tichadou, Jean-Yves Hascoët:
  3D safe and intelligent trajectory generation for multi-axis machine tools using machine vision. 365-385

Volume 26, Number 5, 2013

Articles

• 
  Andre S. Salles, Diane E. Gyi:
  Delivering personalised insoles to the high street using additive manufacturing. 386-400
• 
  Hui Yang, Satish T. S. Bukkapatnam, Leandro G. Barajas:
  Continuous flow modelling of multistage assembly line system dynamics. 401-411
• 
  Julio Cesar Ticona Benavente, João Carlos Espíndola Ferreira, Cássio Marcos Goulart, Victor Gomes de Oliveira:
  A STEP-NC compliant system for the remote design and manufacture of mechanical components through the Internet. 412-428
• 
  Tianliang Hu, Peng Li, Chengrui Zhang, Riliang Liu:
  Design and application of a real-time industrial Ethernet protocol under Linux using RTAI. 429-439
• 
  Kosmas Alexopoulos, Dimitris Mavrikios, George Chryssolouris:
  ErgoToolkit: an ergonomic analysis tool in a virtual manufacturing environment. 440-452
• 
  Magali Bosch-Mauchand, Farouk Belkadi, Matthieu Bricogne, Benoît Eynard:
  Knowledge-based assessment of manufacturing process performance: integration of product lifecycle management and value-chain simulation approaches. 453-473
• 
  Xiaolin Li, Huaping Chen, Bing Du, Qi Tan:
  Heuristics to schedule uniform parallel batch processing machines with dynamic job arrivals. 474-486

Volume 26, Number 6, 2013

Articles

• 
  Sajjad Shokohyar, Saeed Mansour:
  Simulation-based optimisation of a sustainable recovery network for Waste from Electrical and Electronic Equipment (WEEE). 487-503
• 
  Guanlong Deng, Kang Zhang, Xingsheng Gu:
  A hybrid discrete differential evolution algorithm to minimise total tardiness on identical parallel machines. 504-512
• 
  Tsung-Nan Tsai:
  An adaptive diagnosis system for copper wire bonding process control and quality assessment in integrated circuit assembly. 513-526
• 
  Kwabena Agyapong-Kodua, Rob Darlington, Svetan M. Ratchev:
  Towards the derivation of an integrated design and manufacturing methodology. 527-539
• 
  Atiya Al-Zuheri, Lee Luong, Ke Xing:
  Prediction and analysis impact of operational design of a manual assembly system with walking workers on performance. 540-560
• 
  S. Sivakumar, V. Dhanalakshmi:
  An approach towards the integration of CAD/CAM/CAI through STEP file using feature extraction for cylindrical parts. 561-570
• 
  J. J. Liu, Z. A. Lin, Q. X. Chen, N. Mao, X. D. Chen:
  A decision support to assign mould due date at customer enquiry stage in computer-integrated manufacturing (CIM) environments. 571-582

Volume 26, Number 7, 2013

Articles

• 
  Cheol-Han Kim, Kwangsoo Kim, Jeongsoo Lee, Dongwoo Kang, Kwangyeol Ryu:
  Ontology-based process model for business architecture of a virtual enterprise. 583-595
• 
  Zicheng Zhu, V. G. Dhokia, Aydin Nassehi, Stephen T. Newman:
  A review of hybrid manufacturing processes - state of the art and future perspectives. 596-615
• 
  Alborz Shokrani, V. G. Dhokia, Patricia Muñoz-Escalona, Stephen T. Newman:
  State-of-the-art cryogenic machining and processing. 616-648
• 
  Ray Y. Zhong, Zhi Li, Lam Yu Pang, Y. Pan, Ting Qu, George Q. Huang:
  RFID-enabled real-time advanced planning and scheduling shell for production decision making. 649-662
• 
  Yingying Seow, Shahin Rahimifard, Elliot Woolley:
  Simulation of energy consumption in the manufacture of a product. 663-680
• 
  Reza Ramezanian, Mohammad Saidi-Mehrabad, Parviz Fattahi:
  Integrated lot-sizing and scheduling with overlapping for multi-level capacitated production system. 681-695

Volume 26, Number 8, 2013

Articles

• 
  Ugur Köklü:
  Optimisation of machining parameters in interrupted cylindrical grinding using the Grey-based Taguchi method. 696-702
• 
  Shu-Hsien Liao, Pei-Yuan Hsiao:
  Mining business knowledge for developing integrated key performance indicators on an optical mould firm. 703-719
• 
  Jinting Xu, Chunning Jin:
  Boundary-conformed machining for trimmed free-form surfaces based on mesh mapping. 720-730
• 
  Mahmoud Houshmand, Omid Fatahi Valilai:
  A layered and modular platform to enable distributed CAx collaboration and support product data integration based on STEP standard. 731-750
• 
  Jose Zendoia, M. Zapp, Kwabena Agyapong-Kodua, Niels Lohse, M. Singh:
  Fundamentals of a co-design methodology for improving the performance of machine tools based on semantic representation. 751-761
• 
  Hossam Faris, Alaa F. Sheta, Ertan Öznergiz:
  Modelling hot rolling manufacturing process using soft computing techniques. 762-771
• 
  Yihang Luo, Yushun Fan, Haoyi Wang:
  Business correlation-aware modelling and services selection in business service ecosystem. 772-785
• 
  Weining Liu, Bo Liu, Dihua Sun, Yiming Li, Gang Ma:
  Study on multi-task oriented services composition and optimisation with the 'Multi-Composition for Each Task' pattern in cloud manufacturing systems. 786-805
• 
  Malte Prösser, Philip R. Moore, Xi Chen, Chi-Biu Wong, Ulrich Schmidt:
  A new approach towards systems integration within the mechatronic engineering design process of manufacturing systems. 806-815

Volume 26, Number 9, 2013

Articles

• 
  Tunjo Peric, Zoran Babic, Ivica Veza:
  Vendor selection and supply quantities determination in a bakery by AHP and fuzzy multi-criteria programming. 816-829
• 
  Matthias Thürer, Moacir Godinho Filho, Mark Stevenson:
  Coping with finite storage space in job shops through order release control: an assessment by simulation. 830-838
• 
  Ala Qattawi, Ahmad Mayyas, Mahmoud Abdelhamid, Mohammed A. Omar:
  Incorporating quality function deployment and analytical hierarchy process in a knowledge-based system for automotive production line design. 839-856
• 
  Tiziana Segreto, Alessandra Caggiano, Doriana Marilena D'Addona:
  Assessment of laser-based reverse engineering systems for tangible cultural heritage conservation. 857-865
• 
  Jérémy Bonvoisin, Sebastian Thiede, Daniel Brissaud, Christoph Herrmann:
  An implemented framework to estimate manufacturing-related energy consumption in product design. 866-880
• 
  Paolo Renna, Luciano Magrino, Renato Zaffina:
  Dynamic card control strategy in pull manufacturing systems. 881-894

Volume 26, Number 10, 2013

Special Issue: International Conference on Manufacturing Automation, 2010 Editorial

• 
  Charlie C. L. Wang:
  Recent technology in design and manufacturing automation. 895-896

Original Articles

• 
  Jie Sun, Jerry Y. H. Fuh, Eng San Thian, Geok Soon Hong, Yoke San Wong, Rui Yang, Kok Kiong Tan:
  Fabrication of electronic devices with multi-material drop-on-demand dispensing system. 897-906
• 
  Patrick S. Chang, David W. Rosen:
  The size matching and scaling method: a synthesis method for the design of mesoscale cellular structures. 907-927
• 
  Wing-Shing Tang, K. C. Hui:
  Deformation of objects with non-linear constraints. 928-938
• 
  Yong Chen, Stephen J. Stoyan:
  Multi-piece mould design based on a mixed-integer programming method. 939-954

Articles

• 
  James L. Mathieson, Bradley A. Wallace, Joshua D. Summers:
  Assembly time modelling through connective complexity metrics. 955-967

Original Articles

• 
  Jianan Lu, Yonghua Chen:
  Topology optimisation and customisation of a prosthetic knee joint design. 968-976
• 
  Hsin-Ta Hsieh, Yi-Chun Tsai, Chih-Hsing Chu:
  Multi-pass progressive tool path planning in five-axis flank milling by particle swarm optimisation. 977-987

Volume 26, Number 11, 2013

Special Issue: Modelling Collaborative and Interoperable Enterprise Processes Editorial

• 
  Xavier Boucher, Hamideh Afsarmanesh:
  Modelling collaborative and interoperable enterprise processes. 988-989

Original Articles

• 
  Lai Xu, Paul de Vrieze, Keith Phalp, Sheridan Jeary, Peng Liang:
  Interoperative end-user process modelling for process collaborative manufacturing. 990-1002
• 
  Michele Germani, Marco Mandolini, Maura Mengoni, Margherita Peruzzini:
  Platform to support dynamic collaborative design processes in virtual enterprises. 1003-1020
• 
  Tiago Cardoso, Luis M. Camarinha-Matos:
  Pro-Active Service Ecosystem Framework. 1021-1041
• 
  Frédérick Bénaben, Nicolas Boissel-Dallier, Hervé Pingaud, Jean-Pierre Lorré:
  Semantic issues in model-driven management of information system interoperability. 1042-1053
• 
  Heiko Thimm, Karsten Boye Rasmussen:
  Obtaining informedness in collaborative networks through automated information provisioning - a modelling framework and active database system approach. 1054-1065
• 
  Carla Pereira, Cristóvão Sousa, António Lucas Soares:
  Supporting conceptualisation processes in collaborative networks: a case study on an R&D project. 1066-1086
• 
  Carine Rongier, Matthieu Lauras, François Galasso, Didier Gourc:
  Towards a crisis performance-measurement system. 1087-1102

Volume 26, Number 12, 2013

Special Issue: Lean Product and Process Development Editorial

• 
  Ahmed Al-Ashaab, Durward K. Sobek II:
  Lean product and process development: a value creation paradigm that goes beyond lean manufacturing. 1103-1104

Original Articles

• 
  Muhammad S. Khan, Ahmed Al-Ashaab, Essam Shehab, Badr Haque, Paul Ewers, Mikel Sorli, Amaia Sopelana:
  Towards lean product and process development. 1105-1116
• 
  Geir Ringen, Halvor Holtskog:
  How enablers for lean product development motivate engineers. 1117-1127
• 
  Ludvig Lindlöf, Björn Söderberg, Magnus Persson:
  Practices supporting knowledge transfer - an analysis of lean product development. 1128-1135
• 
  Anja Schulze, Philipp Schmitt, Mareike Heinzen, Philipp Mayrl, Daniel Heller, Roman Boutellier:
  Exploring the 4I framework of organisational learning in product development: value stream mapping as a facilitator. 1136-1150
• 
  Masato Inoue, Yoon-Eui Nahm, Haruo Ishikawa:
  Application of preference set-based design method to multilayer porous materials for sound absorbency and insulation. 1151-1160
• 
  Bo Li, Ting Han, Fuyong Kang:
  Fault diagnosis expert system of semiconductor manufacturing equipment using a Bayesian network. 1161-1171
• 
  Wenyan Song, Xinguo Ming, Zhenyong Wu, Baoting Zhu:
  Failure modes and effects analysis using integrated weight-based fuzzy TOPSIS. 1172-1186