default search action
Google
Google Scholar
Semantic Scholar
Internet Archive Scholar
CiteSeerX
ORCIDIAS 2008: Edmonton, Alberta, Canada
- Industry Applications Society Annual Meeting, IAS 2008, Edmonton, Alberta, Canada, 5-9 October, 2008. IEEE 2008, ISBN 978-1-4244-2278-4
- Roy McCann
, Anh T. Le, David Traore:
Model Predictive Control for Time-Delay Compensation of a Switched Reluctance Motor Drive in Smart Building Applications. 1-4 - Hisayuki Sugimura, Bishwajit Saha, Shinichiro Sumiyoshi, Hideki Omori, Sang-Pil Mun, Soon-Kurl Kwon, Eiji Hiraki, Mutsuo Nakaoka:
New Built-In Induction Heating Cooker Using High-Frequency ZVS-PWM Converter with Single Stage Circuit Topology. 1-6 - X. Chen, Zi-Qiang Zhu, David Howe:
Modeling and Analysis of a Tubular Oscillating Permanent Magnet Actuator. 1-8 - Roy McCann, Anh T. Le, David Traore:
Stochastic Sliding Mode Arbitration for Energy Management in Smart Building Systems. 1-4 - Roy McCann, Anh T. Le:
Lebesgue Sampling with a Kalman Filter in Wireless Sensors for Smart Appliance Networks. 1-5 - Claudio Bianchini, Fabio Immovilli, Alberto Bellini, Paolo Mignano:
Arc Linear Motors for Direct Drive Robots: Galileo Sphere. 1-7 - Aengus Murray, Marco Palma, Ali Husain:
Performance Comparison of Permanent Magnet Synchronous Motors and Controlled Induction Motors in Washing Machine Applications Using Sensorless Field Oriented Control. 1-6 - Eric R. Motto, John F. Donlon, Ming Shang, Kazuhiro Kuriaki, Toru Iwagami, Hisashi Kawafuji, Toshiya Nakano:
Large Package Transfer Molded DIP-IPM. 1-5 - Huangsheng Xu:
Lower-Cost Sensorless Vector Control Method for Three-Phase PMSMs That Uses One-Shunt Current Detection. 1-6 - Jianwen Shao, Clifford Ortmeyer, David Finch:
Smart Home Appliance Control. 1-6 - Jeff Stafford, Arefeen Mohammed:
Integrating System Functions Using a Single DSP Controller. 1-5 - Ahmed Rubaai:
A DSP-Based Switching Motor Controller. 1-7 - Dae-kyong Kim, Se-Hyun Rhyu, Kwang-Woon Lee, Byung-taek Kim, Dong-hwa Chung, Byung-Il Kwon:
Comparison of Starting Method for Position Sensorless BLDC Motor Driven Reciprocating Compressor. 1-6 - Iustin Radu Bojoi, Paolo Guglielmi, Gianmario Pellegrino:
Sensorless Stator Field-Oriented Control for Low Cost Induction Motor Drives with Wide Field Weakening Range. 1-7 - Eric Armando, Paolo Guglielmi, Michele Pastorelli, Gianmario Pellegrino, Alfredo Vagati:
Performance of IPM-PMASR Motors with Ferrite Injection for Home Appliance Washing Machine. 1-6 - Alija Cosic, Chandur Sadarangani, Jan Timmerman:
Design and Manufacturing of a Linear Transverse Flux Permanent Magnet Machines. 1-5 - Kwanghwan Lee, Jongman Hong, Kwang-Woon Lee, Sang Bin Lee, Ernesto J. Wiedenbrug:
A Stator Core Quality Assessment Technique for Inverter-Fed Induction Machines. 1-8 - Prabhakar Neti, Ali Banitalebi Dehkordi, Aniruddha M. Gole:
A New Robust Method To Detect Rotor Faults in Salient-Pole Synchronous Machines Using Structural Asymmetries. 1-8 - Gennadi Y. Sizov, Chia-Chou Yeh, Nabeel A. O. Demerdash:
Application of Piezoelectric Sensors to Rotor Fault Diagnostics in Squirrel-Cage Induction Machines. 1-6 - Babak Vaseghi, Babak Nahid-Mobarakeh, Noureddine Takorabet, Farid Meibody-Tabar:
Experimentally Validated Dynamic Fault Model for PMSM with Stator Winding Inter-Turn Fault. 1-5 - Qing Wu, Subhasis Nandi:
Fast Single-Turn Sensitive Stator Inter-Turn Fault Detection of Induction Machines Based on Positive and Negative Sequence Third Harmonic Components of Line Currents. 1-8 - Fabio Immovilli, Alberto Bellini, Riccardo Rubini, Carla Tassoni:
Diagnosis of Bearing Faults in Induction Machines by Vibration or Current Signals: A Critical Comparison. 1-8 - Noureddine Takorabet, Jean-Paul Caron, Babak Vaseghi, Babak Nahid-Mobarakeh, Farid Meibody-Tabar, Gregory Humbert:
Study of Different Architectures of Fault Tolerant Actuator Using a Double-Star PM Motor. 1-6 - Y. Zhan, Andrew Michael Knight, Y. Wu, Richard A. McMahon:
Investigation and Comparison of Inverter-Fed Induction Machine Loss. 1-6 - Peter Scavenius Andersen, David George Dorrell, Niels Christian Weihrauch, Poul Erik Hansen:
Synchronous Torques in Split Phase Induction Motors. 1-8 - Ayman M. El-Refaie, Manoi R. Shah:
Comparison of Induction Machine Performance with Distributed and Fractional-Slot Concentrated Windings. 1-8 - Shahin Hedayati Kia, Humberto Henao, Gérard-André Capolino:
A Modeling Approach for Gearbox Monitoring Using Stator Current Signature in Induction Machines. 1-6 - Toni Tuovinen, Marko Hinkkanen, Jorma Luomi:
Modeling of Mutual Saturation in Induction Machines. 1-8 - David P. Cashman, John G. Hayes, Michael G. Egan:
Comparison of Test Methods for Characterisation of a Doubly-Fed Induction Machine. 1-8 - Fuminori Ishibashi, Makoto Matsushita, Shinichi Noda, Kenzo Tonoki:
Change of Mechanical Natural Frequencies of Induction Motor. 1-6 - Jérôme Legranger, Guy Friedrich, Stéphane Vivier, Jean Claude Mipo:
Combination of Finite Element and Analytical Models in the Optimal Multi-Domain Design of Machines : Application to an Interior Permanent Magnet Starter Generator. 1-6 - Seok-Hee Han, Thomas M. Jahns, Zi-Qiang Zhu:
Analysis of Rotor Core Eddy-Current Losses in Interior Permanent Magnet Synchronous Machines. 1-8 - Seok-Hee Han, Thomas M. Jahns, Zi-Qiang Zhu:
Design Tradeoffs between Stator Core Loss and Torque Ripple in IPM Machines. 1-8 - Sang-Ho Lee, Jung-Pyo Hong:
A Study on the Acoustic Noise Reduction of Interior Permanent Magnet Motor with Concentrated Winding. 1-5 - Yoshiaki Kano, Takashi Kosaka, Nobuyuki Matsui, Tashihito Nakanishi:
Design of Saliency-Based Sensorless Drive IPM Motors for General Industrial Applications. 1-6 - Seung-Hoon Lee, Kwang-Kyu Han, Ho-Jin Ahn, Gyu-Hong Kang, Young-Dae Son, Gyu-Tak Kim:
A Study on Reduction of Vibration Based on Decreased Cogging Torque for Interior Type Permanent Magnet Motor. 1-6 - Nobuo Fujii, Takeshi Mizuma:
Analytical Study of Special Linear Motor-Transformer for Wireless Tram. 1-7 - Ralf Wegener, Sebastian Gruber, Kilian Nötzold, Florian Senicar, Christian Junge, Stefan Soter:
Development and Test of a High Force Tubular Linear Drive Concept with Discrete Wound Coils for Industrial Applications. 1-5 - A. Cassat, Basile Kawkabani, Yves Perriard, Jean-Jacques Simond:
Power Supply of Long Stator Linear Motors - Application to Multi Mobile System. 1-7 - Ho-Jin Ahn, Seung-Hoon Lee, Dong-Yeup Lee, Ki-Bong Jang, Gyu-Tak Kim:
A Study on the Characteristics of PMLSM According to Permanent Magnet Arrangement. 1-6 - Ciro Del Vecchio, Armando Riccardi, Fabrizio Marignetti, Roberto Biasi, Daniele Gallieni, Roberto Spairani:
Linear Motors for Astronomical Mirrors. 1-8 - Dan M. Ionel, Mircea Popescu, Calum Cossar, Malcolm Iain McGilp, Aldo Boglietti, Andrea Cavagnino:
A General Model of the Laminated Steel Losses in Electric Motors with PWM Voltage Supply. 1-7 - Fabrizio Marignetti:
On Liquid-Nitrogen-Cooled Copper-Wound Machines with Soft Magnetic Composite Core. 1-7 - Pinjia Zhang, Yi Du, Bin Lu, Thomas G. Habetler:
A Remote and Sensorless Thermal Protection Scheme for Soft-Starter-Connected Induction Motors. 1-7 - Aldo Boglietti, Andrea Cavagnino, David A. Staton, Mircea Popescu, Calum Cossar, Malcolm Iain McGilp:
End Space Heat Transfer Coefficient Determination for Different Induction Motor Enclosure Types. 1-8 - Aldo Boglietti, Andrea Cavagnino, Andrew Michael Knight:
Isolating the Impact of PWM Modulation on Motor Iron Losses. 1-7 - Marubini J. Manyage, Pragasen Pillay:
New Epstein Frame for Core Loss Measurements at High Frequencies and High Flux Densities. 1-6 - Luigi Alberti, Emanuele Fornasiero, Nicola Bianchi, Silverio Bolognani:
Impact of Rotor Losses in a 12-Slot 10-Pole Axial Flux PM Machine. 1-8 - Shinichiro Iwasaki, Rajesh P. Deodhar, Yong Liu, Adam Pride, Z. Q. Zhu, Jonathan James Bremner:
Influence of PWM on the Proximity Loss in Permanent Magnet Brushless AC Machines. 1-8 - Arwyn Sean Thomas, Zi-Qiang Zhu, R. L. Owen, Geraint Wyn Jewell, David Howe:
Multi-Phase Flux-Switching Permanent Magnet Brushless Machine for Aerospace Application. 1-8 - Katsumi Yamazaki, Yu. Fukushima, Makoto Sato:
Loss Analysis of Permanent Magnet Motors with Concentrated Windings - Variation of Magnet Eddy Current Loss Due to Stator and Rotor Shapes. 1-8 - R. L. Owen, Zi-Qiang Zhu, Arwyn Sean Thomas, Geraint Wyn Jewell, David Howe:
Fault-Tolerant Flux-Switching Permanent Magnet Brushless AC Machines. 1-8 - Patel B. Reddy, Tom M. Jahns, Ayman M. El-Refaie:
Impact of Winding Layer Number and Slot/Pole Combination on AC Armature Losses of Synchronous Surface PM Machines Designed for Wide Constant-Power Speed Range Operation. 1-8 - Wei Hua, Ming Cheng, Hongyun Jia, Xiaofan Fu:
Comparative Study of Flux-Switching and Doubly-Salient PM Machines Particularly on Torque Capability. 1-8 - Oskar Wallmark, Peter Kjellqvist, Florence Meier:
Analysis of Axial Leakage in High-Speed Slotless PM Motors for Industrial Hand Tools. 1-6 - Byung-taek Kim, Dae-kyong Kim, Byung-Il Kwon, Thomas A. Lipo:
Optimal Skew Angle for Improving of Start-Up Performance of a Single-Phase Line-Start Permanent Magnet Motor. 1-6 - Ayman M. El-Refaie, Zi-Qiang Zhu, Thomas M. Jahns, David Howe:
Winding Inductances of Fractional Slot Surface-Mounted Permanent Magnet Brushless Machines. 1-8 - Florence Meier, Juliette Soulard:
Analysis of Flux Measurements on a PMSM With Non-Overlapping Concentrated Windings. 1-8 - David George Dorrell, Mircea Popescu, Calum Cossar, Dan M. Ionel:
Unbalanced Magnetic Pull in Fractional-Slot Brushless PM Motors. 1-8 - Imanol Egaña, A. Garía Rico, Ibon Elosegui, Jose Martín Echeverría, Miguel Martínez-Iturralde:
Flat Magnets in Surface-Mounted Permanent Magnet Machines. 1-8 - Cheewoo Lee, Ramu Krishnan:
New Designs of a Two-Phase E-Core Switched Reluctance Machine by Optimizing the Magnetic Structure for a Specific Application: Concept, Design, and Analysis. 1-8 - Prabhakar R. Vandana, Naresh Vattikuti, B. G. Fernandes:
A Novel High Power Density Segmented Switched Reluctance Machine. 1-7 - J. S. Hsu, T. A. Burress, S. T. Lee, R. H. Wiles, C. L. Coomer, John W. McKeever, D. J. Adams:
16, 000-RPM Interior Permanent Magnet Reluctance Machine with Brushless Field Excitation. 1-6 - Wen Ding, Deliang Liang:
Calculation of Flux Linkages of a 12/8 Dual-Channel SRM Including Mutual Coupling and Saturation: From Magnetic Circuit Model to FEM Analysis. 1-8 - Nimal Savio Lobo, Ethan Swint, Ranu Krishnan:
M-Phase N-Segment Flux-Reversal-Free Stator Switched Reluctance Machines. 1-8 - Ethan Swint, Ranu Krishnan:
Two-Phase SR Drive with Flux-Reversal Free Stator and Balanced Normal Forces. 1-6 - Deok-je Bang, Henk Polinder, Ghanshyan Shrestha, Jan Abraham Ferreira:
Design of a Lightweight Transverse Flux Permanent Magnet Machine for Direct-Drive Wind Turbines. 1-7 - Haodong Li, Pragasen Pillay:
A Methodology to Design Linear Generators for Energy Conversion of Ambient Vibrations. 1-8 - David George Dorrell, Milutin G. Jovanovic:
On the Possibilities of Using a Brushless Doubly-Fed Reluctance Generator in a 2 MW Wind Turbine. 1-8 - Giovanni Franceschini, Emilio Lorenzani, Carla Tassoni, Alberto Bellini:
Synchronous Reference Frame Grid Current Control for Single-Phase Photovoltaic Converters. 1-7 - Patrick Ragot, Paolo Germano, Miroslav Markovic, Yves Perriard:
Brushless DC Motor for a Solar Airplane Application: Comparison between Simulations and Measurements. 1-6 - Ehsan Abdi-Jalebi, Xiaoyan Wang, Shiyi Shao, Richard A. McMahon, Peter Tavner:
Performance Characterisation of Brushless Doubly-Fed Generator. 1-6 - D. S. More, Hari Kalluru, B. G. Fernandes:
Outer Rotor Flux Reversal Machine for Rooftop Wind Generator. 1-6 - John S. Hsu, Seong-Taek Lee, Leon M. Tolbert:
High-Strength Undiffused Brushless (HSUB) Machine. 1-8 - Sebastiano Merzaghi, Pascal Meyer, Yves Perriard:
Development of Planar Microcoils for an Electromagnetic Linear Actuator Fabricated in Batch-Type Wafer Technology. 1-6 - Youguang Guo, Xuefan Wang, Jianguo Zhu, Haiyan Lu:
Development of a Wound Rotor Brushless Doubly Fed Machine Based on Slot MMF Harmonics. 1-5 - He Zhang, Keith Bradley, Pericle Zanchetta:
A None-Intrusive Load and Efficiency Evaluation Method for In-Service Motors Using Vibration Tests with an Accelerometer. 1-6 - Alberto Tessarolo, Fabio Luise:
An Analytical-Numeric Method for Stator End-Coil Leakage Inductance Computation in Multi-Phase Electric Machines. 1-8 - Yasutaka Fujimoto, Tsutomu Kominami, Hiroshi Hamada:
Development of a Spirally-Shaped Linear Actuator. 1-5 - Annette Muetze:
On a New Type of Inverter-Induced Bearing Current in Large Drives with Oil-Lubricated Bearings. 1-8 - Zhengwei Long, Qiang Yao, Qiang Song, Shuiqing Li, Amar Tilmatine:
Computation of Electrical Conditions Inside a Wire-Plate Electrostatic Precipitator Using an Unstructured Finite Volume Method. 1-4 - Meena Mahmood, Yang Xu, Zhongrui Li, Enkeleda Dervishi, Nawab Ali, Viney Saini, Alexandru S. Biris, Steven S. Trigwell, Vladimir P. Zharov, Alexandru Radu Biris, Dan Lupu:
Graphitic Materials for RF Thermal Ablation of Tumors. 1-6 - Kazuo Shimizu, Masahiro Yamada, Masaki Kanamori, Marius Blajan:
Basic Study of Sterilization at Low Discharge Voltage by Using Microplasma. 1-6 - Shesha H. Jayaram:
Pulsed Power Applied to Process Industry. 1-6 - Ayman H. El-Hag, Shesha H. Jayaram, Mansel W. Griffiths, R. Dadarwal:
Survivability of Inoculated Versus Naturally Grown Bacteria in Liquid Foods under Pulsed Electric Fields. 1-4 - Ahmed M. Gaouda, Ayman H. El-Hag, Shesha H. Jayaram:
Detection of Discharge Activities During Food Processing by Pulsed Electric Field. 1-4 - Jen-Shih Chang, Hiroaki Tsubone, Glenn D. Harvel, Kuniko Urashima:
Capillary/Narrow Flow Channel Driven EHD Gas Pump for an Advanced Thermal Management of Micro-Electronics. 1-8 - Miad Yazdani, Jamal Seyed-Yagoobi:
An Electrically Driven Impinging Liquid Jet for Direct Cooling of Heated Surfaces. 1-7 - Michal Pribyl, Kazimierz Adamiak:
Numerical Models for AC Electro-Osmotic Micropumps. 1-8 - Ichiro Kano, Yoshio Kano, Tatsuo Nishina:
Innovative Electrode Arrangement for Electrohydrodynamic Pumping. 1-7 - Kelly Robinson:
Verifying Solution Component Concentration by Measuring Frequency Dependent Conduction of Electrically Charged Species. 1-5 - Chitral J. Angammana, Shesha H. Jayaram:
Analysis of the Effects of Solution Conductivity on Electro-Spinning Process and Fiber Morphology. 1-4 - Hiroshi Umemoto, Hideaki Hayashi, Kazunori Takashima, Akira Mizuno:
Electrostatic Precipitators for Cleaning Diesel Exhaust. 1-4 - Toshiaki Yamamoto, Takahiko Abe, Takuya Mimura, Naoyuki Otsuka, Yoshikazu Ito, Yoshiyasu Ehara, Akinori Zukeran:
Electrohydrodynamically-Assisted Electrostatic Precipitator for Collection of Low Resistive Dust. 1-5 - Andrei Bologa, Helmut Seifert, Hanns-Rudolf Paur, Thomas Wäscher, Markus Lehner, Klaus Woletz:
Collection of Fine Particles by Novel Wet Electrostatic Precipitator. 1-7 - Norbert Grass, Andreas Zintl, Enrico Hoffmann:
Enhanced Performance for Electrostatic Precipitators by Means of Conventional and Fuzzy Logic Control. 1-4 - Lucian Dascalescu, Ciprian Dragan, Mihai Bilici, Radu Beleca, Youna Hemery, Xavier Rouau:
Premises for the Electrostatic Separation of Wheat Bran Tissues. 1-6 - Amar Tilmatine, S. Bendimerad, Karim Medles, Abdelber Bendaoud, Mohamed Younes, Lucian Dascalescu:
Set-Point Identification and Robustness Testing of a Free-Fall Triboelectrostatic Separation Process. 1-7 - Khouira Senouci, Abdelber Bendaoud, Karim Medles, Amar Tilmatine, Lucian Dascalescu:
Comparative Study between the Shewhart and CUSUM Charts for the Statistic Control of Electrostatic Separation Processes. 1-5 - William D. Greason:
Analysis of the Effect of ESD on the Operation of MEMs. 1-7 - Takahiro Yoshida, Noriaki Masui:
A Study on Discharge Current and Radiation Noise of ESD from Charged Metal and Charged Human Body. 1-6 - Abdelber Bendaoud, Amar Tilmatine, Karim Medles, Mohamed Younes, Octavian Blejan, Lucian Dascalescu:
Experimental Study of Corona Discharge Generated in a Modified Wire-Plate Electrode Configuration for Electrostatic Processes Applications. 1-4 - Tetsuji Oda, Hiraku Miyasaka, Ryo Ono:
Basic Research on Low Voltage Electrostatic Discharge Phenomena. 1-5 - Maciej A. Noras, Apra Pandey:
Evaluation of Surface Charge Density with Electrostatic Voltmeter - Measurement Geometry Considerations. 1-6 - Belaid Tabti, R. Mekideche, Marius-Cristian Plopeanu, Laurentiu Marius Dumitran, Lazhar Herous, Lucian Dascalescu:
Corona Charging and Charge Decay Characteristics of Non-Woven Filter Media. 1-6 - Toshiyuki Sugimoto, Hiromu Ishii, Yoshio Higashiyama:
Non Contacting Measurement of Surface Resistivity Using Phi Type Electrodes. 1-6 - Ludovic Boyer, Olivier Fruchier, Petru Notingher Jr., Serge Agnel, Alain Toureille, Bernard Rousset, Jean-Louis Sanchez:
Analysis of Data Obtained Using the Thermal Step Method on a MOS Structure - An Electrostatic Approach. 1-6 - Kei Kakuta, Kazunori Takashima, Akira Mizuno:
Electro-Chemical Preparation of Fine Needles for Field Ion Microscopy to Observe Biomolecules. 1-5 - Rajesh Sharma, Jacob Paul Bock, Alexandru S. Biris, Malay K. Mazumder, Prajna P. Das, Manoranjan Misra, Vishal K. Mahajan:
Application of Atmospheric-Pressure Plasma for Enhancing Photoelectrochemical Properties of TiO2 Electrodes. 1-5 - Yutaka Soda, Masaaki Sekine:
Pt-Doped Al2O3 as Dissipative Gap-Material in Tape Heads. 1-6 - Enkeleda Dervishi, Zhongrui Li, Viney Saini, Rajesh Sharma, Yang Xu, Malay K. Mazumder, Alexandru S. Biris, Steven S. Trigwell, Alexandru Radu Biris, Dan Lupu, Divey Saini:
Multifunctional Coatings with Carbon Nanotubes for Electrostatic Charge Mitigation. 1-4 - Anca Petre, Sombel Diaham, Edgar Reyes-Melo, Viney Saini, Zhongrui Li, Alexandru S. Biris, Adrian Samuila, Lucian Dascalescu:
Molecular Dynamics of Poly 3-Hexyl Thiophene by Broadband Dielectric Spectroscopy. 1-4 - Tetsuji Oda, Hikaru Kuramochi, Ryo Ono:
Non-Thermal Plasma Process for Dilute Trichloroehtylene Decomposition Combined with Catalyst Position Effect of Plasma Reactor and Catalyst. 1-5 - Tomoyuki Kuroki, Kiyoyuki Hirai, Ryouhei Kawabata, Masaaki Okubo, Toshiaki Yamamoto:
Decomposition of Adsorbed Xylene on Adsorbent Using Nonthermal Plasma and Gas Circulation. 1-6 - Masami Sugasawa, Tomoyuki Terasawa, Shigeru Futamura:
Additive Effect of Water on the Decomposition of VOCs in Nonthermal Plasma. 1-6 - Hidekatsu Fujishima, Tomoyuki Kuroki, Tomohira Ito, Masaaki Okubo, Keiichi Otsuka, Toshiaki Yamamoto, Keiichiro Yoshida:
Performance Characteristics of Pilot-Scale Plasma-Chemical NOx Removal System from Boiler Emission. 1-6 - Yoshio Yoshioka, Hiroaki Kondo, Yasuharu Tabata, Hayato Hatakenaka, Katsushi Nakada:
Automatic Control Method of NO Removal by a Combination of Ozone Injection and Exhaust Gas Recirculation. 1-7 - Masaaki Okubo, Tomoyuki Kuroki, Shinpei Kawasaki, Keiichiro Yoshida, Toshiaki Yamamoto:
Continuous Regeneration of Ceramics Particulate Filter in Stationary Diesel Engine Using Nonthermal Plasma-Induced Ozone Injection. 1-6 - Ryo Ono, Chihiro Tobaru, Yoshiyuki Teramoto, Tetsuji Oda:
Observation of N2(A³SIGMA+u) Metastable in Pulsed Positive Corona Discharge Using Laser-Induced Fluorescence. 1-4 - Malay K. Mazumder, Rajesh Sharma, Alexandru S. Biris, Steven S. Trigwell, Mark N. Horenstein, M. M. Abbas:
Electrostatic and Gravitational Transport of Lunar Dust in the Airless Atmosphere of the Moon. 1-4 - Takashi Sato:
Electrodynamic Suspension and Stability of a Charged Droplet in Quadrupole Electrode. 1-4 - M. O'Leary, Wamadeva Balachandran, F. Chambers:
Nebulised Aerosol Electrostatic Charge Explored Using Bipolar Electrical Mobility Profiles. 1-5 - Charles G. Noll:
Standards for Industrial Electrostatic Processes. 1-8 - Deying Yu, G. S. Peter Castle, Kazimierz Adamiak:
Dynamic Induction Charging of Particles with Finite Conductivity. 1-7 - Laur Calin, Alexandru Iuga, Adrian Samuila, Ciprian Dragan, Lucian Dascalescu:
Factors that Influence the Fluidized-Bed Tribo-Electrostatic Separation of Plastic Granular Mixtures. 1-4 - Sinclair Gair, Neil Finlayson, André Martins de Martini, Ruairi D. MacIver:
Hydrogen Production from a Large Digester Gas Plant - Plant Layout, Modeling, and Evaluation. 1-6 - K. Pelope Adzakpa, Julien Ramousse, Kodjo Agbossou, Yves Dubé, Nadine Hassanaly, F. Zemmar:
Experimental Validation of a State Model for PEMFC Auxiliaries Control. 1-5 - Jérémy Lagorse, Stefan Giurgea, Damien Paire, Maurizio Cirrincione, Marcelo Godoy Simões, Abdellatif Miraoui:
Optimal Design Analysis of a Stand-Alone Photovoltaic Hybrid System. 1-7 - Abraham Gebregergis, Pragasen Pillay:
Implementation of Fuel Cell Emulation on DSPand dSPACE Controllers in the Design of Power Electronic Converters. 1-8 - Abraham Gebregergis, Pragasen Pillay, Raghunathan Rengaswamy:
PEMFC Fault Diagnosis, Modeling, and Mitigation. 1-8 - Jérémy Lagorse, Marcelo Godoy Simões, Abdellatif Miraoui:
A Multi-Agent Fuzzy Logic Based Energy Management of Hybrid Systems. 1-7 - Huibin Sui, Honghong Wang, Ming-Shun Lu, Wei-Jen Lee:
An AMI System for the Deregulated Electricity Markets. 1-5 - Cheng-Ting Hsu, Hui-Jen Chuang, Chao-Shun Chen:
Artificial Neural Network Based Adaptive Load Shedding for an Industrial Cogeneration Facility. 1-8 - Bingchang Ni, Constantinos Sourkounis:
Influence of Wind Energy Converter Control Methods on the Output Frequency Components. 1-7 - Ming-Shun Lu, Chung-Liang Chang, Wei-Jen Lee, Li Wang:
Combining the Wind Power Generation System with Energy Storage Equipments. 1-6 - Joon-Hwan Lee, Seung-Hwan Lee, Seung-Ki Sul:
Variable Speed Engine Generator with Super-Capacitor; Isolated Power Generation System and Fuel Efficiency. 1-5 - Paras Mandal, Anurag K. Srivastava, Michael Negnevitsky, Jung-Wook Park:
An Effort to Optimize Similar Days Parameters for ANN Based Electricity Price Forecasting. 1-9 - Fabio Immovilli, Alberto Bellini, Claudio Bianchini, Giovanni Franceschini:
Solar Trigeneration for Residential Applications, a Feasible Alternative to Traditional Micro-Cogeneration and Trigeneration Plants. 1-8 - Morgan Kiani, Wei-Jen Lee:
Effects of Voltage Unbalance and System Harmonics on the Performance of Doubly Fed Induction Wind Generators. 1-7 - Hui-Jen Chuang, Chao-Shun Chen, Chia-Hung Lin, Ching-Ho Hsieh, Chin-Ying Ho:
Design of Optimal Coasting Speed for MRT Systems Using ANN Models. 1-7 - Hailian Xie, Lennart Angquist, Hans-Peter Nee:
A Converter Topology Suitable for Interfacing Energy Storage with the DC Link of a StatCom. 1-4 - Ling Li, Xiangjun Zeng, Ping Zhang, Yunfeng Xia, Guopin Liu:
Optimization of Reactive Power Compensation in Wind Farms Using Sensitivity Analysis and Tabu Algorithm. 1-5 - Sudipta Chakraborty, Marcelo Godoy Simões:
PV-Microgrid Operational Cost Minimization by Neural Forecasting and Heuristic Optimization. 1-8 - Keith Malmedal, Benjamin Kroposki, Pankaj Kumar Sen:
Distributed Energy Resources and Renewable Energy in Distribution Systems: Protection Considerations and Penetration Levels. 1-8 - Gökhan Sen, Malik Elbuluk:
Voltage and Current Programmed Modes in Control of the Z-Source Converter. 1-8 - M. Nasir Uddin, Sang Woo Nam:
Experimental Performance Evaluation of a Nonlinear Controller Based IM Drive Incorporating Iron Loss in the Motor Model. 1-8 - Pinaki Mitra, Ganesh Kumar Venayagamoorthy:
Real Time Implementation of an Artificial Immune System Based Controller for a DSTATCOM in an Electric Ship Power System. 1-8 - Soon Lee, Jung-Wook Park, Ganesh Kumar Venayagamoorthy:
New Power Quality Index in a Distribution Power System by Using RMP Model. 1-7 - Wei Qiao, Ronald G. Harley:
Improved Control of DFIG Wind Turbines for Operation with Unbalanced Network Voltages. 1-7 - Giuseppe Marsala, D. Bouquin, Jay-Tawee Pukrushpan, Marcello Pucci, Giansalvo Cirrincione, Gianpaolo Vitale, Abdellatif Miraoui:
A Neural Inverse Control of a PEM-FC System by the Generalized Mapping Regressor (GMR). 1-12 - Xiaobing Liu, Zhongkai Li, Xiao Wang, Wenliang Zhao:
Study on Dynamic Production Planning System Oriented to Shipbuilding Process. 1-6 - Estela Pérez, Raúl Ramírez, Salomé Pérez:
Implementation of an Automatic Counting and Control Production System for Metal-Mechanics Industries. 1-3 - Babak Parkhideh, Subhashish Bhattacharya, Joy Mazumdar, Walter G. Koellner:
Modeling and Control of Large Shovel Converter Systems Integrated with Supercapacitor. 1-7 - Chuan Yan, Ganesh Kumar Venayagamoorthy, Keith A. Corzine:
Hardware Implementation of an AIS-Based Optimal Excitation Controller for an Electric Ship. 1-8 - Ismael Pérez, Raúl Ramírez, Salomé Pérez:
Security System for Die Cutting Press. 1-3 - Rahul Godbole, Subhashish Bhattacharya:
Design and Development of a Flexible Multi-Purpose Controller Hardware System for Power Electronics and Other Industrial Applications. 1-6 - Phani Tangirala, J. Robert Heath, Arthur Radun, Terry Conners:
A Hand-Held Programmable-Logic-Device Based Temperature and Relative-Humidity Sensor, Processor and Display System Platform for Automation and Control of Industry Processes. 1-8 - Hussein F. E. Soliman, Malik E. Elbuluk:
Improving the Torque Ripple in DTC of PMSM Using Fuzzy Logic. 1-8 - M. Abdesh S. K. Khan, M. Azizur Rahman:
A Novel Neuro-Wavelet Based Self-Tuned Wavelet Controller for IPM Motor Drives. 1-8 - Curtis Parrot, Ganesh Kumar Venayagamoorthy:
Real-Time Implementation of Intelligent Modeling and Control Techniques on a PLC Platform. 1-7 - Konstantinos T. Kampisios, Pericle Zanchetta, Chris Gerada, Andrew Trentin:
Identification of Induction Machine Electrical Parameters Using Genetic Algorithms Optimization. 1-7 - Muhammad Mahbubur Rashid, Nasrudin Abd. Rahim, Mohamed Azlan Hussain, F. Mohamed, Md. Azizur Rahman:
Development and Testing of Hybrid Fuzzy Logic Controller for Car Suspension System Using Magneto-Rheological Damper. 1-8 - Cheng-Tsung Liu, Sheng-Yang Lin, Yung-Yi Yang:
On the Fuzzy-Based Control Strategy Design and Implementation of a Non-Contacting Steel Plate Conveyance System. 1-6 - Ravinder Pal Singh, Ashwin M. Khambadkone:
Current Sharing and Sensing in N-Paralleled Converters Using Single Current Sensor. 1-7 - Sheng-Ming Yang, Chien-Lung Huang:
A Low Cost Linear Position Measurement System for Magnetically Levitated Rotor in Axial Flow Pump. 1-5 - Marius Mihalachi, Peter Mutschler:
Position Acquisition for Long Primary Linear Drives with Passive Vehicles. 1-8 - Karim Abdennadher, Pascal Venet, Gérard Rojat, Jean-Marie Retif, Christophe Rosset:
A Real Time Predictive Maintenance System of Aluminium Electrolytic Capacitors Used in Uninterrupted Power Supplies. 1-6 - Jangho Yoon, Jangho Yun, Sang Bin Lee, Ernesto J. Wiedenbrug:
Automated Monitoring of High-Resistance Connections in the Electrical Distribution System of Industrial Facilities. 1-8 - Jie Liu, Shahab Ghafari, Wilson Wang, M. Farid Golnaraghi, Fathy Ismail:
Bearing Fault Diagnostics Based on Reconstructed Features. 1-7 - Saleh A. Saleh, M. Azizur Rahman:
Analysis and Development of a Resolution-Level Vector-Controlled WM Inverter-Fed IPM Motor Drive. 1-8 - Auzani Jidin, Nik Rumzi Nik Idris, Abd-Alhalim Yatim, Malik Elbuluk:
A Novel Overmodulation and Field Weakening Strategy for Direct Torque Control of Induction Machines. 1-8 - Thierry Boileau, Babak Nahid-Mobarakeh, Farid Meibody-Tabar:
On-Line Identification of PMSM Parameters: Model-Reference vs EKF. 1-8 - Alessandro Lidozzi, Vittoria Serrao, Luca Solero, Fabio Crescimbini, Augusto Di Napoli:
Direct Tuning Strategy for PMSM Drives. 1-7 - M. Nasir Uddin, Wilson Wang, Zhi Rui Huang:
Modeling and Minimization of Speed Ripple of a Faulty Induction Motor with Broken Rotor Bars. 1-8 - Prashanth Reddy Kambalapally, Donald S. Zinger:
CORDIC Implementation of Space Vector Modulation. 1-5 - Ion Boldea, Vasile Coroban-Schramel, Gheorghe-Daniel Andreescu, Sever Scridon, Frede Blaabjerg:
BEGA Starter/Alternator - Vector Control Implementation and Performance for Wide Speed Range at Unity Power Factor Operation. 1-8 - Bart L. J. Gysen, Jeroen L. G. Janssen, Johannes J. H. Paulides, Elena A. Lomonova:
Design Aspects of an Active Electromagnetic Suspension System for Automotive Applications. 1-8 - Hanna Magdalena Plesko, Jürgen Biela, Johann Walter Kolar:
Design and Analysis of a New Drive-Integrated Auxiliary Dc-Dc Converter for Hybrid Vehicles. 1-8 - Carlo Concari, Giovanni Franceschini, Andrea Toscani:
Design and Optimization of a Hybrid-Electric Vehicle for Advanced Urban Mobility. 1-7 - Erik Schaltz, Peter Omand Rasmussen:
Design and Comparison of Power Systems for a Fuel Cell Hybrid Electric Vehicle. 1-8 - Euzeli C. dos Santos, Cursino Brandão Jacobina, Edison Roberto Cabral da Silva, Hamid A. Toliyat:
Monolithic Systems Using Standard Three-Leg Inverter Supplying Independently Two Motors. 1-7 - Yun Wei Li, Manish Pande, Navid Reza Zargari, Bin Wu:
Power Factor Control for High Power Current Source Drive with Active Front End. 1-8 - Suvajit Mukherjee, Gautam Poddar:
A Series Connected Three-Level Inverter Topology For Medium Voltage Squirrel Cage Motor Drive Applications. 1-8 - Luigi Galotto Jr., João Onofre Pereira Pinto, Luciana Cambraia Leite, Luiz Eduardo Borges da Silva, Bimal K. Bose:
Evaluation of the Auto-Associative Neural Network Based Sensor Compensation in Drive Systems. 1-6 - Jing Huang, Keith A. Corzine:
A New Walking Pattern SVM Technique for Five-Phase Motor Drives. 1-8 - Chee Yeow Leong, Nii-Adotei Parker-Allotey, Richard A. McMahon:
Loss Comparison between an SPWM and Harmonic Elimination Excited Small, (<1kW) Induction Motor Drive Using Pspice Simulation and Calorimetry. 1-6 - Cursino Brandão Jacobina, Euzeli Cipriano dos Santos Jr., Bernard de Sá Gouveia, Edison Roberto Cabral da Silva:
Reversible AC Drive Systems Based on Parallel AC-AC DC-Link Converters. 1-7 - Jeffrey Ewanchuk, John C. Salmon, Andrew Michael Knight:
Performance of a High Speed Motor Drive System Using a Novel Multi-Level Inverter Topology. 1-8 - Tae-Suk Kwon, Seon-Woo Lee, Seung-Ki Sul, Byoung-il Kang, Min-Seok Hong, Cheol-Gyu Park, Nag-in Kim:
Power Control Algorithm for Hybrid Excavator with Super Capacitor. 1-8 - Smith Lerdudomsak, Shinji Doki, Shigeru Okuma:
Analysis for Unstable Problem of PMSM Current Control System in Overmodulation Range. 1-8 - Zhiguo Pan, Raed Ahmad, Daniel M. Saban:
Space-Shifted Split-Phase High-Speed Motor/Converter Topology with Fault-Tolerance Capability. 1-7 - Jaehyuck Kim, Ramu Krishnan:
High Efficiency Single-Pulse Controlled Switched Reluctance Motor Drive for High Speed (48k RPM) Application: Analysis, Design, and Experimental Verification. 1-8 - Behrooz Mirafzal, Gary L. Skibinski, Rangarajan M. Tallam:
A Failure Mode for PWM Inverter-Fed AC Motors Due to the Anti-Resonance Phenomenon. 1-6 - Shahriyar Kaboli, Mohammad Reza Zolghadri, Alireza Khaligh:
Reliability Improvement of Industrial Drives Using Multi-Objective Optimization. 1-6 - Jeroen de Boeij, Elena A. Lomonova, Jorge L. Duarte:
Contactless Planar Actuator with Manipulator: a Motion System without Cables and Physical Contact between the Mover and the Fixed World. 1-8 - Ahmet M. Hava, N. Onur Çetin, Emre Ün:
On the Contribution of PWM Methods to the Common Mode (Leakage) Current in Conventional Three-Phase Two-Level Inverters as Applied to AC Motor Drives. 1-8 - Ke Wang, Liming Shi, Yaohua Li, Jinwei He:
A Decoupling Control Scheme of Combined Levitation-and-Propulsion SLIM for Maglev Vehicle. 1-5 - Seung-Hwan Lee, Jung-Sik Yim, Joon-Hwan Lee, Seung-Ki Sul:
Design of Speed Control Loop of A Variable Speed Diesel Engine Generator by Electric Governor. 1-5 - Joseph Song-Manguelle, Christof Sihler, Jean Maurice Nyobe-Yome:
Modeling of Torsional Resonances for Multi-Megawatt Drives Design. 1-8 - Tobias Rösmann, Stefan Soter:
Regenerative Operation of DC-Series Machines in Pitchsystems for Multimegawatt Windturbines. 1-7 - Stefan Schröder, Pierluigi Tenca, Tobias Geyer, Paolo Soldi, Luis Garces, Richard Zhang, Tommaso Toma, Paolo Bordignon:
Modular High-Power Shunt-Interleaved Drive System: A Realization up to 35 MW for Oil & Gas Applications. 1-8 - Annette Muetze, H. William Oh:
Current-Carrying Characteristics of Conductive Microfiber Rings for High Frequencies and Current Amplitudes. 1-7 - Galina Mirzaeva, Alejandro J. Rojas:
Advanced Control Strategies for Stability Improvement of Natural Field Orientation. 1-8 - Kyung-Rae Cho, Jul-Ki Seok:
Induction Motor Temperature Estimation Based on High-Frequency Model of Rotor Bar. 1-7 - Fernando Briz, Michael W. Degner, Juan M. Guerrero, Pablo García:
Diagnostics of Induction Machines Operated from Inverters and Soft-Starters Using High Frequency Negative Sequence Currents. 1-8 - Carsten Skovmose Kallesoe:
Model-Based Stator Fault Detection in Induction Motors. 1-8 - Joseph Song-Manguelle, Jean Maurice Nyobe-Yome:
Pulsating Torques in PWM Multi-Megawatt Drives for Torsional Analysis of Large Shafts. 1-8 - Ademir Nied, José de Oliveira, Rafael de F. Campos, Rogério P. Dias, Luiz C. de Souza Marques:
Soft Starting of Induction Motor with Torque Control. 1-6 - Yukinori Inoue, Shigeo Morimoto, Masayuki Sanada:
Examination and Linearization of Torque Control System for Direct Torque Controlled IPMSM. 1-7 - Ping-Yi Lin, Yen-Shin Lai:
Novel Voltage Trajectory Control for Flux Weakening Operation of Surface Mounted PMSM Drives. 1-8 - Ju-Young Jang, Chan-Hee Choi, Jul-Ki Seok:
Precise Torque Control in Flux-Weakening Operation of Surface-Mounted PM Motor with Magnetic Saliencies. 1-5 - Hongyun Jia, Ming Cheng, Wei Hua, Wei Lu, Xiaofan Fu:
Investigation and Implementation of Control Strategies for Flux-Switching Permanent Magnet Motor Drives. 1-6 - Massimo Barcaro, Luigi Alberti, Adriano Faggion, Luca Sgarbossa, Michele Dai Pré, Nicola Bianchi, Silverio Bolognani:
IPM Machine Drive Design and Tests for an Integrated Starter-Alternator Application. 1-8 - Alfio Consoli, Giuseppe Scarcella, Giacomo Scelba, S. Sindoni, Antonio Testa:
Steady-State and Transient Analysis of Maximum Torque per Ampere Control for IPMSMs. 1-8 - Malakondaiah Naidu, Suresh Gopalakrishnan, Thomas Nehl:
Fault Tolerant Permanent Magnet Motor Drive Topologies for Automotive X-By-Wire Systems. 1-8 - Ming Chuan Huang, Anthony John Moses, Fatih Jamel Anayi:
Shaft Position Correction Scheme Comparison for Sensorless Control of a PMSM Based on State-Space Estimation between Variance Adjustment and Angle PI Regulation. 1-8 - Anno Yoo, Seung-Ki Sul:
Design of Flux Observer Robust to Parameter Variation of Interior Permanent Magnet Synchronous Motor. 1-7 - Francesco Cupertino, David Naso, Ernesto Mininno, Biagio Turchiano:
Sliding Mode Control with Double Boundary Layer for Robust Compensation of Payload Mass and Friction in Linear Motors. 1-8 - David Reigosa, Pablo García, Fernando Briz, Dejan Raca, Robert D. Lorenz:
Modeling and Adaptive Decoupling of Transient Resistance and Temperature Effects in Carrier-Based Sensorless Control of PM Synchronous Machines. 1-8 - Francesco Cupertino, Paolo Giangrande, Maurizio Scaringi, Silvio Stasi, Luigi Salvatore:
Sensorless Control of Linear Tubular Permanent Magnet Synchronous Motors Using Pulsating Signal Injection. 1-8 - Dejan Raca, Pablo García, David Reigosa, Fernando Briz, Robert D. Lorenz:
Carrier Signal Selection for Sensorless Control of PM Synchronous Machines at Zero and Very Low Speeds. 1-8 - Junggi Lee, Kwanghee Nam, Seoho Choi, Soonwoo Kwon:
Loss Minimizing Control of PMSM with the Use of Polynomial Approximations. 1-9 - Young-Su Kwon, Jeong-Hum Lee, Sang-Ho Moon, Byung-Ki Kwon, Chang-Ho Choi, Jul-Ki Seok:
Standstill Parameter Identification of Vector-Controlled Induction Motor Using Frequency Characteristics of Rotor Bars. 1-7 - Thomas M. Wolbank, Mohamed K. Metwally:
Zero Speed Sensorless Control of Induction Machines Using Rotor Saliencies. 1-6 - Gianmario Pellegrino, Paolo Guglielmi, Eric Armando, Iustin Radu Bojoi:
Self-Commissioning Algorithm for Inverter Non-Linearity Compensation in Sensorless Induction Motor Drives. 1-7 - Reiko Raute, Cedric Caruana, Cyril Spiteri Staines, Joseph Cilia, Mark Sumner, Gregory M. Asher:
Sensorless Control of Induction Machines by Using PWM Harmonics for Rotor Bar Slotting Detection. 1-8 - Longya Xu, Bo Guan, Jiangang Hu:
A Robust Sensorless Control Algorithm for Induction Generator Operating in Deep Flux Weakening Region. 1-8 - Pascal Maussion, Labo Chhun, Sounil Bhosle, Georges Zissis:
Acoustic Resonance Characteristics in a High Pressure Sodium Lamp. 1-4 - Hiroshi Kikuchi, Hiroto Sato, Hideo Fujikake, Fumio Sato:
Nanoimprint Applications for Liquid Crystal Displays. 1-5 - Masayuki Nakamoto:
Current Trends in Field Emission Displays. 1-5 - Tetsuri Inoue, Kazutake Uehira, Kazumi Komiya, Masahiro Suzuki:
Human Factors of 3-D Displays for Virtual Reality. 1-4 - C. H. Zhang, Sunao Katsuki, H. Horta, H. Imamura, Hidenori Akiyama:
High-Power EUV Source for Lithography Using Tin Target. 1-4 - Alessio Corazza, Stefano Giorgi, Vincenzo Massaro:
Mercury Dosing in Fluorescent Lamps. 1-4 - Yang Liu, Sounil Bhosle, David Buso, Georges Zissis, Dahua Chen:
Investigation of Moving Striations in a 50Hz AC Low-Pressure Ar-Hg Discharge. 1-4 - Veeravach Jamjureeruk, Thomas O. Leyh:
Energy Saver F32T8 Lamps and Dimming Ballasts for Sustainable Lighting. 1-8 - Yi-Cyun Cheng, Chun-An Cheng:
A Novel Driver Circuit for Multiple Cold-Cathode Fluorescent Lamps of LCD Backlight Modules. 1-5 - Lucas B. Oliveira, Guilherme S. Oliveira, Jackson Piazza, Murilo Cervi, Ricardo N. do Prado, Alysson R. Seidel:
Fixed Frequency Self-Oscillating Electronic Ballast Design Procedure. 1-6 - Mohsin A. Shafi, Richard A. McMahon, Sven Weier:
Comparison of Self-Oscillating Electrode and Electrode-Less Compact Fluorescent Lamps from Loss Perspective. 1-6 - Cecilio Blanco Viejo, Juan Carlos Álvarez Antón, Arturo Robles, Francisco Javier Ferrero Martín, Juan Carlos Viera Pérez, Sounil Bhosle, Georges Zissis:
Comparison between Different Discharge Lamp Models Based on Lamp Dynamic Conductance. 1-6 - Tiago B. Marchesan, Murilo Cervi, André Luís Kirsten, Alexandre Campos, Ricardo N. do Prado:
Analysis of the Output Capacitor and Lamp voltage Inversion for the Bidirectional Flyback Converter. 1-7 - Christian Brañas, Francisco J. Azcondo, Rosario Casanueva:
Envelope Analysis of a Phase-Controlled Triple LCpCs Resonant Inverter for Electronic Ballast Applications. 1-7 - Ray-Lee Lin, Jung-Pei Cheng, Feng-Yin Chen:
Self-Oscillating Full-Bridge Electronic Ballast with Constant-Lamp-Current Control and No-Lamp-Protection Circuit. 1-7 - Tsorng-Juu Liang, Chien-Ming Huang, Jiann-Fuh Chen:
Two-Stage High Power Factor Electronic Ballast for Metal-Halide Lamps. 1-8 - Moksoon Jang, Byounglo Lim, Chongyeun Park:
An Optimal LCC Design Method for Dimmable Electronic Ballasts of the HID lamp. 1-8 - Chun-An Cheng, Kun-Jheng Lin:
A Novel Low-Cost Electronic Ballast for Automotive HID Lamps. 1-5 - Chun-An Cheng, Yung-Chine Wu:
A Novel Single-Stage Low-Frequency Square-Wave Driven Electronic Ballast for HID Lamps. 1-7 - Basia Halliop, Francis P. Dawson, Mary C. Pugh:
A Dynamic Model of a High Temperature Arc Lamp. 1-8 - Manfred Kettlitz, Jacob Zalach, J. Rarbach:
Characterization of Non-Stable States of Lamp Operation of High Power Lamps. 1-3 - Dolf H. J. van Casteren, Marcel A. M. Hendrix, Jorge L. Duarte:
Observer Based Ceramic HID Lamp Control. 1-8 - Rafael E. da Costa, Jeferson S. da Silveira, Fabio Luis Tomm, Tiago Bandeira Marchesan, Alexandre Campos, Ricardo N. do Prado:
Warm-Up and Steady-State Control of High-Pressure Sodium Lamps Applied to Public Lighting Systems. 1-7 - Tiago B. Marchesan, Jeferson S. da Silveira, Murilo Cervi, Marco A. Dalla Costa, José Marcos Alonso Alvarez, Alexandre Campos, Ricardo N. do Prado:
Integration Methodology of DC/DC Converters to Supply HPS Lamps: An Experimental Approach. 1-5 - Jorge García, Emilio L. Corominas, Antonio Javier Calleja, Marco A. Dalla Costa, Javier Ribas, Manuel Rico-Secades:
Design of Resonant Igniters for Metal Halide Lamps Supplied with High Frequency Square Waveform Inverters. 1-6 - Fabio Luis Tomm, Jacson Hansen, Ricardo N. do Prado, Alexandre Campos:
A Simple Electronic Ballast to Supply HID Lamps. 1-6 - David Gacio Vaquero, Antonio Javier Calleja Rodriguez, Jorge García, Javier Ribas, Manuel Rico-Secades:
Suitable Switching Converter Topologies for Automotive Signal Lamps and Headlamps Using Power LEDs. 1-7 - David Gacio Vaquero, Jesús Cardesín Miranda, Emilio L. Corominas, J. Marcos Alonso, Marco A. Dalla Costa, Antonio Javier Calleja Rodriguez:
Comparison Among Power LEDs for Automotive Lighting Applications. 1-5 - Rafael A. Pinto, Marcelo R. Cosetin, Tiago B. Marchesan, Murilo Cervi, Alexandre Campos, Ricardo N. do Prado:
Compact Lamp Using High-Brightness LEDs. 1-5 - Joep Jacobs, Carsten Singer, Dirk Hente, Hans-Peter Loebl:
Dynamic Control Point Simulation of OLEDs. 1-5 - Thomas Friedli, Simon D. Round, Dominik Hassler, Johann W. Kolar:
Design and Performance of a 200 kHz All-SiC JFET Current Source Converter. 1-8 - Stephan Thomas, Rik W. De Doncker:
Unsymmetric Control of a Matrix Converter for Two-Phase Inductive Melting Furnaces. 1-8 - Makoto Saito, Nobuyuki Matsui:
A Single- to Three-Phase Matrix Converter for a Vector-Controlled Induction Motor. 1-6 - Lixiang Wei, Richard A. Lukaszewski, Thomas A. Lipo:
Analysis of Power Cycling Capability of IGBT Modules in a Conventional Matrix Converter. 1-8 - Akihisa Matsushita, Kazuyasu Takimoto, Kentaro Suzuki, Hiromichi Tai, Ryoichi Kurosawa, Isao Kamiyama:
Experimental Verification of Current Source Inverter with ZVS Commutation Circuit. 1-8 - Max Beuermann, Werner Fischer, Peter Kalbfleisch, Martin Hilscher, Bernd Blöcher:
Modular Load Commutated Inverters - A Proven Concept for High Power Applications. 1-7 - Osman S. Sentürk, Ahmet M. Hava:
High Performance Harmonic Isolation and Load Voltage Regulation of the Three-Phase Series Active Filter Utilizing the Waveform Reconstruction Method. 1-8 - Tzung-Lin Lee, Po-Tai Cheng:
A Harmonic Damping Method for a Loop Power System. 1-8 - Fabio Carastro, Mark Sumner, Pericle Zanchetta:
An Enhanced Shunt Active Filter with Energy Storage for Microgrids. 1-7 - Anish Prasai, Jyoti Sastry, Deepak Divan:
Dynamic Var/Harmonic Compensation with Inverter-Less Active Filters. 1-6 - Francisco D. Freijedo, Jesús Doval-Gandoy, Óscar Lopez, Jacobo Cabaleiro:
Harmonic Identification Methods Based on Moving Average Filters for Active Power Filters. 1-6 - Mirunalini V. Chellappan, Maja Harfman Todorovic, Prasad N. Enjeti:
Fuel Cell Based Battery-Less UPS System. 1-8 - Ulrich Boeke, Heinz van der Broeck:
Transformer-Less Converter Concept for a Grid-Connection of Thin-Film Photovoltaic Modules. 1-8 - Haihua Zhou, Ashwin M. Khambadkone:
Hybrid Modulation for Dual Active Bridge Bi-Directional Converter With Extended Power Range For Ultracapacitor Application. 1-8 - Peng Zhou, Yikang He, Dan Sun, Jianguo Zhu:
Control and Protection of a DFIG-Based Wind Turbine under Unbalanced Grid Voltage Dips. 1-8 - Yuedong Zhan, Youguang Guo, Jianguo Zhu, Hua Wang:
Power Converters and Controllers for UPS Applications with Backup PEM Fuel Cell. 1-8 - Nawapan Chanasut, Suttichai Premrudeepreechacharn:
Maximum Power Control of Grid-Connected Solid Oxide Fuel Cell System Using Adaptive Fuzzy Logic Controller. 1-6 - Yongqiang Lang, Bin Wu, Navid Reza Zargari:
A Novel Reactive Power Control Scheme for CSC Based PMSG Wind Energy System. 1-6 - Wenchao Song, Bin Chen, Qian Chen, Alex Q. Huang:
Intelligent Modularized Emitter Turn-Off Thyristor (ETO)-Based High Power Converter. 1-5 - Fred Wang, Rixin Lai, Xibo Yuan, Fang Luo, Rolando Burgos, Dushan Boroyevich:
Fault Detection and Protection of Three-Level Neutral-Point-Clamped PWM Voltage Source Converters. 1-7 - J. Wang, P. Kadanak, Mark Sumner, David W. P. Thomas, R. D. Geertsma:
Active Fault Protection for an AC Zonal Marine Power System Architecture. 1-7 - Yu Liu, Alex Q. Huang, Guojun Tan, Subhashish Bhattacharya:
Control Strategy Improving Fault Ride-Through Capability of Cascade Multilevel Inverter Based STATCOM. 1-6 - Nicolai Mortensen, Giri Venkataramanan:
An Active Common Mode EMI Filter for Switching Converters. 1-7 - Edison Roberto Cabral da Silva, Antônio S. de O. Jr., Cursino Brandão Jacobina, Ricardo Lúcio de Araujo Ribeiro, Liviane C. A. Melo, Hubert Razik:
Compensation of Switch Faults in a Three-Level Inverter. 1-6 - Gui-Jia Su, Lixin Tang:
A Three-Phase Bidirectional DC-DC Converter for Automotive Applications. 1-7 - Hisayuki Sugimura, Tetsuya Etoh, Toshimitsu Doi, Keiki Morimoto, Bishwajit Saha, Sang-Pil Mun, Eiji Hiraki, Mutsuo Nakaoka:
A New Soft-Switching PWM High Frequency Half-Bridge Inverter Linked DC-DC Converter with Diode-Clamped Active Edge Resonant Snubbers. 1-7 - Akshay K. Rathore, Ashoka K. S. Bhat, S. Nandi, Ramesh Oruganti:
Closed Loop Control Design of Two Inductor Current-Fed Isolated DC-DC Converter for Fuel Cells to Utility Interface Application. 1-8 - A. Kavitha, G. Indira, G. Uma:
Analysis and Control of Chaos in SEPIC DC-DC Converter Using Sliding Mode Control. 1-6 - Ye-Then Chang, Yen-Shin Lai:
Digital Compensator Design to Reduce Phase Lag for Multi-Sampling Controlled DC-DC Converters. 1-7 - Dong-hyun Ha, Nam-Ju Park, Kui-Jun Lee, Dong-Gyu Lee, Dong-Seok Hyun:
Interleaved Bidirectional DC-DC Converter for Automotive Electric Systems. 1-5 - Di Zhang, Fred Wang, Rolando Burgos, Rixin Lai, Dushan Boroyevich:
Interleaving Impact on AC Passive Components of Paralleled Three-Phase Voltage-Source Converters. 1-7 - Majid Pahlevaninezhad, Sayed Ali Khajehoddin, Alireza R. Bakhshai, Praveen K. Jain:
Analysis and Implementation of a Power Switch for Telecommunication Applications. 1-5 - Wenchao Song, Subhashish Bhattacharya, Alex Q. Huang:
Fault-Tolerant Transformerless Power Flow Controller Based-On ETO Light Converter. 1-5 - Hyoung Y. Cho, Enrico Santi:
Modeling and Stability Analysis of Cascaded Multi-Converter Systems Including Feedforward and Feedback Control. 1-8 - Chris Chapelsky, John C. Salmon, Andrew Michael Knight:
High-Quality Single Phase Power Conversion by Reconsidering the Magnetic Components in the Output Stage - Building a Better Half Bridge. 1-8 - Donald Grahame Holmes, Brendan P. McGrath, D. Segaran, Wang Y. Kong:
Dynamic Control of a 20kW Interleaved Boost Converter for Traction Applications. 1-8 - Gorazd Stumberger, Klemen Dezelak, Bostjan Polajzer, Drago Dolinar, Beno Klopcic:
The Impact of Voltage Generation on Harmonic Spectra of Current and Flux Density in the Welding Transformer for a Middle Frequency Resistance Spot Welding System. 1-8 - John C. Salmon, Jeffrey Ewanchuk, Andrew Michael Knight:
PWM Inverters Using Split-Wound Coupled Inductors. 1-8 - Poh Chiang Loh, Feng Gao, Frede Blaabjerg:
Embedded EZ-Source Inverters. 1-8 - Joel Anderson, Fang Z. Peng:
A Class of Quasi-Z-Source Inverters. 1-7 - Hanju Cha, Sanghoey Lee:
Design and Implementation of Photovoltaic Power Conditioning System Using a Current Based Maximum Power Point Tracking. 1-5 - Rongjun Huang, Sudip K. Mazumder:
A Novel Soft-Switching Scheme for an Isolated DC/DC Converter with Pulsating DC Output for a Three-Phase High-Frequency-Link PWM Converter. 1-9 - Joachim Holtz, Nikolaos Oikonomou:
Optimal Control of a Dual Three-Level Inverter System for Medium-Voltage Drives. 1-8 - Rongyuan Li, Michael Loenneker, Norbert Fröhleke, Joachim Böcker:
Design of Power Supply for Driving High Power Piezoelectric Actuators. 1-6 - Baoming Ge, Fang Zheng Peng:
An Effective SPWM Control Technique for 1MVA 6000V Cascaded Neutral Point Clamped Inverter. 1-6 - Jianye Rao, Yongdong Li:
High-Performance Control Strategies and Applications of a New Hybrid Cascaded Multilevel Inverter. 1-5 - Marc Hiller, Rainer Sommer, Max Beuermann:
Converter Topologies and Power Semiconductors for Industrial Medium Voltage Converters. 1-8 - Jun Wen, Keyue Ma Smedley:
A New Modulation Method for Hexagram Inverter. 1-5 - Chenchen Wang, Yongdong Li:
A New Balancing Algorithm of Neutral-Point Potential in the Three-Level NPC Converters. 1-5 - Jie Shen, Klaus Rigbers, Christian P. Dick, Rik W. De Doncker:
A Dynamic Boost Converter Input Stage for a Double 120° Flattop Modulation Based Three-Phase Inverter. 1-7 - Brendan P. McGrath, Donald Grahame Holmes:
A General Analytical Method for Calculating Inverter DC-Link Current Harmonics. 1-8 - Poh Chiang Loh, Yi Tang, Peng Wang, Frede Blaabjerg:
Complex-Vector Time-Delay Control of Power Converters. 1-8 - Christian P. Dick, Matthias Biskoping, Sebastian A. Richter, Rik W. De Doncker:
Variable-Frequency Pulse-Width Modulation for an Improved Grid-Connected Converter Efficiency. 1-6 - Tomasz Laczynski, Timur Werner, Axel Mertens:
Modulation Error Control for Medium Voltage Drives with LC-Filters and Synchronous Optimal Pulse Width Modulation. 1-7 - Nicolau Pereira Filho, João Onofre Pereira Pinto, Luiz Eduardo Borges da Silva, Bimal K. Bose:
Simplified Space Vector PWM Algorithm for Multilevel Inverters Using Non-Orthogonal Moving Reference Frame. 1-6 - Nesrine Bel Haj Youssef, Kamal Al-Haddad, Hadi Youssef Kanaan:
Sensorless Nonlinear Control of a Three-Phase/ Switch/ Level Vienna Rectifier Based on a Numerical Reconstruction of DC and AC Voltages. 1-7 - Steven Fredette, Giri Venkataramanan:
Power Quality Conditioning Using Bridged-T Filters for Passive Rectifiers. 1-7 - Bing Gong, Dewei Xu:
Comparison of LCL-Filter-Based PWM Rectifier with Different Current Sensor Positions. 1-6 - Daniel Roiu, Radu Iustin Bojoi, Leonardo Rodrigues Limongi, Alberto Tenconi:
New Stationary Frame Control Scheme for Three Phase PWM Rectifiers under Unbalanced Voltage Dips Conditions. 1-7 - Yongsug Suh, Peter K. Steimer:
Application of IGCT in High Power Rectifiers. 1-8 - Patrick S. Flannery, Giri Venkataramanan:
Unbalanced Voltage Sag Ride-Through of a Doubly Fed Induction Generator Wind Turbine with Series Grid Side Converter. 1-8 - Robert Eric Betz, Terrence J. Summers, Brian J. Cook:
Outline of the Control Design for a Cascaded H-Bridge STATCOM. 1-8 - Yu-Hsing Chen, Po-Tai Cheng:
An Inrush Current Mitigation Technique for the Line-Interactive Uninterruptible Power Supply Systems. 1-8 - Hideaki Fujita:
A Single-Phase Utility-Interface Circuit without any AC Inductor nor EMI Filter. 1-7 - Chien-Liang Chen, Jih-Sheng Lai, Yu-Bin Wang, Sung-Yeul Park, Hide Miwa:
Design and Control for LCL-Based Inverters with Both Grid-Tie and Standalone Parallel Operations. 1-7 - Phinit Srithorn, Mark Sumner, Liangzhong Yao, Ram Parashar:
Power System Stabilisation Using STATCOM with Supercapacitors. 1-8 - Won-Sang Kim, Sung-Tak Jou, Kyo-Beum Lee, Steve Watkins:
Direct Power Control of a Doudly Fed Induction Generator with a Fixed Switching Frequency. 1-9 - Yung-Yi Yang, Chung-Mei Chen, Chiu-Yi Ho, Wen-Chieh Li, Jung-Huei Wu:
Development of a Camber Measurement System in a Hot Rolling Mill. 1-6 - Cheng-Tsung Liu:
Performance Improvements of an In-Mold Electromagnetic Stirrer with Minimum Hardware Adjustments. 1-5 - John Pittner, Marwan A. Simaan:
Model for Control of a Tandem Hot Metal Strip Rolling Process. 1-8 - Antonio Moreno-Muñoz, Juan José González de la Rosa:
Voltage Sag in Highly Automated Factories. 1-6 - Thomas J. Dionise, Visuth Lorch:
Harmonic Analysis of a Mid-Frequency Welder Application for a Metal Working Facility. 1-6 - Chao-Shun Chen, Cheng-Ting Hsu, Yih-Der Lee, D. S. Ting, C. C. Shen:
Protective Relay Settings of Tie Line Tripping and Load Shedding for an Integrated Steel-Making Cogeneration System. 1-8 - Murat Göl, Özgül Salor-Durna, Bora Alboyaci, Bilge Mutluer, Isik Çadirci, Muammer Ermis:
A New Field-Data Based EAF Model for Power Quality Studies. 1-11 - Chong Han, Alex Q. Huang, Subhashish Bhattacharya, Leonard W. White, Michael Ingram, Stanley Atcitty, Willie Wong:
Design of an Ultra-Capacitor Energy Storage System (UESS) for Power Quality Improvement of Electric Arc Furnaces. 1-6 - John J. Sammarco, Miguel A. Reyes, John R. Bartels, Sean Gallagher:
Evaluation of Peripheral Visual Performance When Using Incandescent and LED Miner Cap Lamps. 1-8 - Eduardo P. Wiechmann, Aníbal S. Morales, Pablo Aqueveque:
Full Measuring System for Copper Electrowinning Processes Using Optibar® Inter-Cell Bars. 1-8 - José R. Rodríguez, Jorge Pontt, Marcelo A. Pérez, Pablo Lezana, Peter W. Hammond:
High Power Synchronous Machine fed by a Cascaded Regenerative Inverter. 1-7 - Babak Parkhideh, Subhashish Bhattacharya, Joy Mazumdar, Walter G. Koellner:
Utilization of Supplementary Energy Storage Systems in High Power Mining Converters. 1-7 - José R. Rodríguez, Bin Wu, Steffen Bernet, Navid Reza Zargari, Jaime Rebolledo, Jorge Pontt, Peter K. Steimer:
Design and Evaluation Criteria for High Power Drives. 1-9 - Todd M. Ruff:
Feasibility of Using Intelligent Video for Machine Safety Applications. 1-5 - José Ignacio Simpson, Jorge Pontt, Adolfo Paredes Palacios, Guillermo Figueroa:
Requirements and Evaluation of an Active Harmonic Filter Application in an Actual Industrial Installation. 1-8 - John J. Sammarco, Miguel A. Reyes, Jean Paul Freyssinier, John D. Bullough, Xin Zhang:
Technological Aspects of Solid-State and Incandescent Sources for Miner Cap Lamps. 1-7 - Juan M. San Martin, Jorge Pontt, F. Bello, Ricardo P. Aguilera:
Interharmonics Power Losses Estimation in Power Transformer fed High Power Cycloconverter Drive. 1-5 - Eduardo P. Wiechmann, Pablo Aqueveque, Aníbal S. Morales:
Improving Efficiency in Iron Ore Mining Facilities. 1-6 - Kevin S. Borthwick, Jaime R. Hargreaves, Greg L. Yorke:
Highland Valley Copper Control Systems Upgrade - Technology, Design, Simulation, and Installation. 1-8 - Wangyi Jin, Xiangjun Zeng, Bo Chen, Yao Xu:
A Novel Measuring Method of Capacitive Current for Ungrounded Distribution Systems. 1-5 - Bin Lu, Santosh K. Sharma:
A Literature Review of IGBT Fault Diagnostic and Protection Methods for Power Inverters. 1-8 - Byoung-Gun Park, Jun-Bae Lee, Dong-Seok Hyun:
A Novel Short-Circuit Detecting Scheme Using Turn-On Switching Characteristic of IGBT. 1-5 - Jean-Luc Schanen, Jean-Michel Guichon, Cyril Domenech, Luc Meysenc:
Physical Layout of High Current Rectifiers: Modern Methods for an Old Challenge. 1-7 - Edison Pires de Moraes, Walter Kaiser:
Analysis of Current Distribution in Parallel Semiconductors of High Current Rectifiers in Electro-Intensive Plants. 1-7 - Saburo Okumura, Hirofumi Yamamoto, Yoshikazu Nishimura, Hironori Hiraoka, Kenzo Danjo, Hiroki Morimoto:
The Application of FRD with Avalanche Capability for Improvement of Power Conversion Efficiency in Output Rectifier and PFC. 1-5 - Jie Chang, Jun Hu:
Analysis and Control of Soft-Commutation of Inverter at Small Residual Voltage with Benign DV/DT and Integrated Converter Module. 1-6 - Andrew Carson Baisden, Dushan Boroyevich, Fei Wang:
EMI Terminal Modeling. 1-8 - Dalibor Cvoric, Sjoerd W. H. de Haan, Jan Abraham Ferreira:
Improved Configuration of the Inductive Core-Saturation Fault Current Limiter with the Magnetic Decoupling. 1-7 - Mitushi Nigam, Charles R. Sullivan:
Multi-Layer Barrel-Wound Foil Winding Design. 1-7 - Aiman Kerim, Jean-Paul Ferrieux, James Roudet, Gérard Meunier:
Analytical and Numerical Contributions for Winding Losses Estimation in an Integrated Magnetic Component. 1-5 - Ian R. Swan, Angus T. Bryant, Philip Mawby:
Fast Thermal Models for Power Device Packaging. 1-8 - Matthew L. Spencer, Robert D. Lorenz:
Analysis and In-Situ Measurement of Thermal-Mechanical Strain in Active Silicon Power Semiconductors. 1-7 - Sven Weier, Mohsin A. Shafi, Richard A. McMahon:
Precision Calorimetry for the Accurate Measurement of Losses in Power Electronic Devices. 1-7 - Lixiang Wei, Russ J. Kerkman, Richard A. Lukaszewski:
Evaluation of Power Semiconductors Power Cycling Capabilities for Adjustable Speed Drive. 1-10 - Jun Wang, Jun Li, Xiaohu Zhou, Tiefu Zhao, Alex Q. Huang, Robert Callanan, Fatima Husna, Anant Agarwal:
10 kV SiC MOSFET Based Boost Converter. 1-6 - Elisa Platania, Zhiyang Chen, Filippo Chimento, Liqing Lu, Enrico Santi, Angelo Raciti, Jerry L. Hudgins, H. Alan Mantooth, David C. Sheridan, J. Cassady:
A Physics-Based Model for a SiC JFET Device Accounting for the Mobility Dependence on Temperature and Electric Field. 1-8 - David W. Berning, Tam H. Duong, José M. Ortiz-Rodríguez, Angel Rivera-López, Allen R. Hefner Jr.:
High-Voltage Isolated Gate Drive Circuit for 10 kV, 100 A SiC MOSFET/JBS Power Modules. 1-7 - Hui Zhang, Leon M. Tolbert, Burak Ozpineci:
Impact of SiC Devices on Hybrid Electric and Plug-in Hybrid Electric Vehicles. 1-5 - Carl N. M. Ho, Francisco Canales, Antonio Coccia, Matti Laitinen:
A Circuit-Level Analytical Study on Switching Behaviors of SiC Diode at Basic Cell for Power Converters. 1-8 - John F. Donlon, Eric R. Motto, Tetsuo Takahashi, Hidenori Fujii, Katsumi Satoh:
Chip Improvements for Future IGBT Modules. 1-7 - Ryan A. Turner, Kenneth S. Smith:
Resonance Excited by Transformer Inrush Current in Inter-Connected Offshore Power Systems. 1-7 - Bostjan Polajzer, Gorazd Stumberger, Sebastijan Seme, Drago Dolinar:
Generalization of Methods for Voltage Sag Source Detection Using Vector Space Approach. 1-8 - Thomas J. Dionise, Rakan El-Mahayni:
Power Quality Investigation of Surge Protective Device Failures During Open-Transition for a Waste Water Treatment Facility. 1-6 - Giuseppe Parise, Aldo Gabelli, Ennio Berenato, D. Brambilla, L. Signorelli:
Architecture of Electrical Installations: The Node Double Two. 1-6 - Giuseppe Parise, Luigi Martirano:
Prospected Evolution for Low Voltage Customers: Ecodesign of the Electrical Distribution System. 1-7 - Md. Enamul Haque, Michael Negnevitsky, Kashem M. Muttaqi:
A Novel Control Strategy for a Variable Speed Wind Turbine with a Permanent Magnet Synchronous Generator. 1-8 - Yaping Du, X. H. Wang, Z. H. Huan:
Induced Voltages and Power Losses in Single-Conductor Armored Cables. 1-6 - Keith Malmedal, Pankaj Kumar Sen:
A Better Understanding of Load and Loss Factors. 1-6 - Xiaodong Liang, William Michael Jackson:
Influence of Subsea Cables on Offshore Power Distribution Systems. 1-7 - Peter E. Sutherland, Vinicius Roubach, Leandro Matos Riani:
Stability Requirements for Implementation of Grid Separation Scheme in a Steel Mill with Internal Generation. 1-7 - Michele Tartaglia, Massimo Mitolo:
Evaluation of the Prospective Joule Integral to Assess the Limit Short Circuit Capability of Cables and Busways. 1-5 - Kejun Li, Jianguo Zhao, Wei-Jen Lee:
Dynamic Simulator for Thyristor Controlled Series Capacitor. 1-6 - Shuhong Wang, Xinying Liu, Jie Qiu, Jian Guo Zhu, Youguang Guo, Zhi Wei Lin:
Robust Optimization in HTS Cable Based on DEPSO and Design for Six Sigma. 1-5 - Robert M. Cuzner, Giri Venkataramanan:
The Status of DC Micro-Grid Protection. 1-8 - Xiao'an Qin, Xiangjun Zeng, Xiaoli Zhang, Zewen Li:
Traveling Wave Based Distribution Lines Fault Location Using Hilbert-Huang Transform. 1-5 - Renfei Che, Jun Liang, Wei-Jen Lee:
An Approach to Improve Measurement Accuracy for Electric Power Fault Recorder. 1-5 - Li-Cheng Wu, Chih-Wen Liu:
A Mal-Trip of Bus Relay Due to Visible Light. 1-4
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-11-08 20:18 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by:
