Search Results (78)

The tribological performance of PFPE oil and the Ti:WS₂/PFPE composite lubricating system with different oil amounts was investigated under a proton radiation (PR) irradiation environment. After PR irradiation, PFPE molecules occurred during cross-linking and a polymerization reaction and formed a volatile small molecular compound, which deteriorates the tribological performance of the Ti:WS₂/PFPE system. The tribological properties of the Ti:WS₂/PFPE system rely strongly on oil amount. For an unirradiated Ti:WS₂/PFPE system, the amorphous layer of transfer film near the sliding contact area was converted into a well-defined crystalline WS₂ layer with a (002) plane induced by the friction process. After PR irradiation, the transfer film became thicker and showed a wholly amorphous structure due to the difficulty in preventing the entrance of O and showed no reorientation with induced friction. Full article

In small clinical studies, the application of transcranial photobiomodulation (PBM), which typically delivers low-intensity near-infrared (NIR) to treat the brain, has led to some remarkable results in the treatment of dementia and several neurodegenerative diseases. However, despite the extensive literature detailing the mechanisms of action underlying PBM outcomes, the specific mechanisms affecting neurodegenerative diseases are not entirely clear. While large clinical trials are warranted to validate these findings, evidence of the mechanisms can explain and thus provide credible support for PBM as a potential treatment for these diseases. Tubulin and its polymerized state of microtubules have been known to play important roles in the pathology of Alzheimer’s and other neurodegenerative diseases. Thus, we investigated the effects of PBM on these cellular structures in the quest for insights into the underlying therapeutic mechanisms. In this study, we employed a Raman spectroscopic analysis of the amide I band of polymerized samples of tubulin exposed to pulsed low-intensity NIR radiation (810 nm, 10 Hz, 22.5 J/cm² dose). Peaks in the Raman fingerprint region (300–1900 cm⁻¹)—in particular, in the amide I band (1600–1700 cm⁻¹)—were used to quantify the percentage of protein secondary structures. Under this band, hidden signals of C=O stretching, belonging to different structures, are superimposed, producing a complex signal as a result. An accurate decomposition of the amide I band is therefore required for the reliable analysis of the conformation of proteins, which we achieved through a straightforward method employing a Voigt profile. This approach was validated through secondary structure analyses of unexposed control samples, for which comparisons with other values available in the literature could be conducted. Subsequently, using this validated method, we present novel findings of statistically significant alterations in the secondary structures of polymerized NIR-exposed tubulin, characterized by a notable decrease in α-helix content and a concurrent increase in β-sheets compared to the control samples. This PBM-induced α-helix to β-sheet transition connects to reduced microtubule stability and the introduction of dynamism to allow for the remodeling and, consequently, refreshing of microtubule structures. This newly discovered mechanism could have implications for reducing the risks associated with brain aging, including neurodegenerative diseases like Alzheimer’s disease, through the introduction of an intervention following this transition. Full article

PDLC films, synthesized via polymerization-induced phase separation (PIPS) utilizing both temperature and UV monochromatic radiation, were derived from a blend of E7 nematic liquid crystal (LC) and PolyEGDMA875 (polyethyleneglycoldimethacrylate) oligomers, serving as the precursor for the polymeric matrix. The influence of the curing temperature on thermal polymerization, UV light intensity on photochemical polymerization, and exposure time during these processes on the electro-optical characteristics of PDLC films was thoroughly examined. Observations revealed that employing thermal polymerization during device preparation notably enhanced the permanent memory effect of the PDLC films. Sustained high transparency (T_OFF = 45%) over an extended duration at room temperature, even subsequent to voltage cessation, was achieved. This transition initiated from an opaque state (T₀ = 0%) through to a transparent state (T_MAX = 65%), resulting in a substantial 70% permanent memory effect. Full article

The study of materials for space exploration is one of the most interesting targets of international space agencies. An essential tool for realizing light junctions is epoxy adhesive (EA), which provides an elastic and robust material with a complex mesh of polymeric chains and crosslinks. In this work, a study of the structural and chemical modification of a commercial two-part flexible EA (3M™ Scotch-Weld™ EC-2216 B/A Gray), induced by ⁶⁰Co gamma radiation, is presented. Combining different spectroscopic techniques, such as the spectroscopic Fourier transform infrared spectroscopy (FTIR), the THz time-domain spectroscopy (TDS), and the electron paramagnetic resonance (EPR), a characterization of the EA response in different regions of the electromagnetic spectrum is performed, providing valuable information about the structural and chemical properties of the polymers before and after irradiation. A simultaneous dissociation of polymeric chain and crosslinking formation is observed.The polymer is not subject to structural modification at an absorbed dose of 10 kGy, in which only transient free radicals are observed. Differently, between 100 and 500 kGy, a gradual chemical degradation of the samples is observed together with a broad and long-living EPR signal appearance. This study also provides a microscopic characterization of the material useful for the mechanism evaluation of system degradation. Full article

In recent years, non-thermal plasma (NTP) has emerged as a promising tool for decontamination and disinfection within the food industry. Given the increasing resistance of microbial biofilms to conventional disinfectants and their adverse environmental effects, this method has significant potential for eliminating biofilm formation or mitigating the metabolic activity of grown biofilms. A comparative study was conducted evaluating the efficacy of UV radiation and NTP in eradicating mature biofilms of four common foodborne filamentous fungal contaminants: Alternaria alternata, Aspergillus niger, Fusarium culmorum, and Fusarium graminearum. The findings reveal that while UV radiation exhibits variable efficacy depending on the duration of exposure and fungal species, NTP induces substantial morphological alterations in biofilms, disrupting hyphae, and reducing extracellular polymeric substance production, particularly in A. alternata and F. culmorum. Notably, scanning electron microscopy analysis demonstrates significant disruption of the hyphae in NTP-treated biofilms, indicating its ability to penetrate the biofilm matrix, which is a promising outcome for biofilm eradication strategies. The use of NTP could offer a more environmentally friendly and potentially more effective alternative to traditional disinfection methods. Full article

Radiation chemistry presents a unique avenue for developing innovative polymeric materials with desirable properties, eliminating the need for chemical initiators, which can be potentially detrimental, especially in sensitive sectors like medicine. In this investigation, we employed a radiation-induced graft polymerization process with N-vinylcaprolactam (NVCL) to modify lignocellulosic membranes derived from Agave salmiana, commonly known as maguey. The membranes underwent thorough characterization employing diverse techniques, including contact angle measurement, degree of swelling, scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier-transform infrared-attenuated total reflectance spectroscopy (FTIR-ATR), nuclear magnetic resonance (CP-MAS ¹³C-NMR), X-ray photoelectron spectroscopy (XPS), and uniaxial tensile mechanical tests. The membranes’ ability to load and release an antimicrobial glycopeptide drug was assessed, revealing significant enhancements in both drug loading and sustained release. The grafting of PNVCL contributed to prolonged sustained release by decreasing the drug release rate at temperatures above the LCST. The release profiles were analyzed using the Higuchi, Peppas–Sahlin, and Korsmeyer–Peppas models, suggesting a Fickian transport mechanism as indicated by the Korsmeyer–Peppas model. Full article

The use of ionizing radiation offers a boundless range of applications for polymer scientists, from inducing crosslinking and/or degradation to grafting a wide variety of monomers onto polymeric chains. This review in particular aims to introduce the field of ionizing radiation as it relates to the degradation and recycling of cellulose and its derivatives. The review discusses the main mechanisms of the radiolytic sessions of the cellulose molecules in the presence and absence of water. During the radiolysis of cellulose, in the absence of water, the primary and secondary electrons from the electron beam, and the photoelectric, Compton effect electrons from gamma radiolysis attack the glycosidic bonds (C-O-C) on the backbone of the cellulose chains. This radiation-induced session results in the formation of alkoxyl radicals and C-centered radicals. In the presence of water, the radiolytically produced hydroxyl radicals (^●OH) will abstract hydrogen atoms, leading to the formation of C-centered radicals, which undergo various reactions leading to the backbone session of the cellulose. Based on the structures of the radiolytically produced free radicals in presence and absence of water, covalent grafting of vinyl monomers on the cellulose backbone is inconceivable. Full article

Dextran methacrylate (Dex-MA) is a biodegradable polysaccharide derivative that can be cross-linked by ionizing radiation. It is therefore considered a potential replacement for synthetic hydrophilic polymers in current radiation technologies used for synthesizing hydrophilic cross-linked polymer structures such as hydrogels, mainly for medical applications. This work is focused on the initial steps of radiation-induced cross-linking polymerization of Dex-MA in water. Rate constants of two major transient water radiolysis products—hydroxyl radicals (^•OH) and hydrated electrons (eaq−)—with various samples of Dex-MA (based on 6–500 kDa dextrans of molar degree of substitution or DS with methacrylate groups up to 0.66) as well as non-substituted dextran were determined by pulse radiolysis with spectrophotometric detection. It has been demonstrated that these rate constants depend on both the molecular weight and DS; reasons for these effects are discussed and reaction mechanisms are proposed. Selected spectral data of the transient species formed by ^•OH- and eaq−-induced reactions are used to support the discussion. The kinetic data obtained in this work and their interpretation are expected to be useful for controlled synthesis of polysaccharide-based hydrogels and nanogels of predefined structure and properties. Full article

This study concerns the one-step radiografting of flax fabrics with phosphonated and fluorinated polymer chains using (meth)acrylic monomers: dimethyl(methacryloxy)methyl phosphonate (MAPC1), 2-(perfluorobutyl)ethyl methacrylate (M4), 1H,1H,2H,2H-perfluorooctyl acrylate (AC6) and 1H,1H,2H,2H-perfluorodecyl methacrylate (M8). The multifunctionalization of flax fabrics using a pre-irradiation procedure at 20 and 100 kGy allows simultaneously providing them with flame retardancy and hydro- and oleophobicity properties. The successful grafting of flax fibers is first confirmed by FTIR spectroscopy. The morphology of the treated fabrics, the regioselectivity of grafting and the distribution of the fluorine and phosphorus elements are assessed by scanning electron microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (SEM-EDX). The flame retardancy is evaluated using pyrolysis combustion flow calorimetry (PCFC) and cone calorimetry. The hydro- and oleophobicity and water repellency of the treated fabrics is established by contact angle and sliding angle measurements, respectively. The grafting treatment of flax irradiated at 100 KGy, using M8 and MAPC1 monomers (50:50) for 24 h, allows achieving fluorine and phosphorus contents of 8.04 wt% and 0.77 wt%, respectively. The modified fabrics display excellent hydro-oleophobic and flame-retardant properties with water and diiodomethane contact angles of 151° and 131°, respectively, and a large decrease in peak of heat release rate (pHRR) compared to pristine flax (from 230 W/g to 53 W/g). Relevant results are also obtained for M4 and AC6 monomers in combination with MAPC1. For the flame retardancy feature, the presence of fluorinated groups does not disturb the effect of phosphorus. Full article

In the 21st century, melanoma and non-melanoma skin cancers have become an epidemic outbreak worldwide. Therefore, the exploration of all potential preventative and therapeutic measures based on either physical or bio-chemical mechanisms is essential via understanding precise pathophysiological pathways (Mitogen-activated protein kinase, Phosphatidylinositol 3-kinase Pathway, and Notch signaling pathway) and other aspects of such skin malignancies. Nano-gel, a three-dimensional polymeric cross-linked porous hydrogel having a diameter of 20–200 nm, possesses dual properties of both hydrogel and nanoparticle. The capacity of high drug entrapment efficiency with greater thermodynamic stability, remarkable solubilization potential, and swelling behavior of nano-gel becomes a promising candidate as a targeted drug delivery system in the treatment of skin cancer. Nano-gel can be either synthetically or architectonically modified for responding to either internal or external stimuli, including radiation, ultrasound, enzyme, magnetic, pH, temperature, and oxidation-reduction to achieve controlled release of pharmaceuticals and several bio-active molecules such as proteins, peptides, genes via amplifying drug aggregation in the active targeted tissue and reducing adverse pharmacological effects. Several drugs, such as anti-neoplastic biomolecules having short biological half-lives and prompt enzyme degradability capacity, must be appropriate for administration employing either chemically bridged or physically constructed nano-gel frameworks. The comprehensive review summarizes the advancement in the preparation and characterization methods of targeted nano-gel with enhanced pharmacological potential and preserved intracellular safety limits for the mitigation of skin malignancies with a special emphasize on skin cancer inducing pathophysiological pathways and prospective research opportunities for skin malignancy targeted nano-gels. Full article

Exposure to ultraviolet (UV) radiation causes harmful effects on the skin, such as inflammatory states and photoaging, which depend strictly on the form, amount, and intensity of UV radiation and the type of individual exposed. Fortunately, the skin is endowed with a number of endogenous antioxidants and enzymes crucial in its response to UV radiation damage. However, the aging process and environmental stress can deprive the epidermis of its endogenous antioxidants. Therefore, natural exogenous antioxidants may be able to reduce the severity of UV-induced skin damage and aging. Several plant foods constitute a natural source of various antioxidants. These include gallic acid and phloretin, used in this work. Specifically, polymeric microspheres, useful for the delivery of phloretin, were made from gallic acid, a molecule that has a singular chemical structure with two different functional groups, carboxylic and hydroxyl, capable of providing polymerizable derivatives after esterification. Phloretin is a dihydrochalcone that possesses many biological and pharmacological properties, such as potent antioxidant activity in free radical removal, inhibition of lipid peroxidation, and antiproliferative effects. The obtained particles were characterized by Fourier transform infrared spectroscopy. Antioxidant activity, swelling behavior, phloretin loading efficiency, and transdermal release were also evaluated. The results obtained indicate that the micrometer-sized particles effectively swell, and release the phloretin encapsulated in them within 24 h, and possess antioxidant efficacy comparable to that of free phloretin solution. Therefore, such microspheres could be a viable strategy for the transdermal release of phloretin and subsequent protection from UV-induced skin damage. Full article

The adverse effects of UV (ultraviolet) radiation on polymeric materials and organic constituents can damage the molecular structure of human skin and polymeric materials, resulting in their degradation. Therefore, additives or reagents for UV-shielding must be used in related applications, including polymer compounds and skin cosmetics. Bio-based polymers have shown great potential as alternatives to conventional metallic and organic materials (e.g., TiO₂ and ZnO) in various applications; therefore, natural products have gained attention as a potential resource to overcome UV-induced health and environmental problems. In particular, biomass-derived materials such as lignin, fiber, and silica have been investigated as UV-shielding materials owing to their biocompatibility, biodegradability, and low carbon emissions. In this review, the UV-shielding effect and potential of various biomass-derived materials, such as silica, nanocellulose, and fibers, are reviewed. Among them, lignin is considered a promising UV-shielding material because of the presence of chromophores and functional groups capable of absorbing UV radiation of all ranges. Full article

Ultraviolet type B (UVB) radiation plays an important role in hyperpigmentation disorder, which induces cellular oxidative stress and causes abnormal melanin production and secretion. The stress condition plays an essential role in actin polymerization relating to F-actin rearrangement and forms dendrite to send melanin pigment to the uppermost layer of the skin. Phenolic compounds are secondary metabolites that mainly synthesize under stress conditions to protect plants from harmful environments and have been reported as effective agents in anti-oxidant and anti-melanogenesis. However, the influence of phenolic compounds on F-actin rearrangement-associated dendrite formation has not been studied so far. Hence, this study aimed to investigate the enhancing phytophenolic targets in riceberry rice (Oryza sativa L.) germination and UVB radiation (RR-GR) to suppress melanogenesis relating to F-rearrangement. As a result, the RR-GR had the potential to enhance phenolic acids such as protocatechuic and vanillic acid, which have been proven to possess anti-oxidant activity and anti-tyrosinase properties. Riceberry rice’s modification showed the potential to reduce cellular oxidative stress and suppress B16F10 melanogenesis relating to F-actin rearrangement that is associated with dendrite formation. Full article

The radiation curing paradigm of opaque WS₂ nanoparticle (NP)-based epoxy/acrylate nanocomposites was studied and found to exhibit both a reduction in viscosity and an enhanced degree of curing when incorporating WS₂ NPs. The objective of this study was to investigate the mechanical, thermal, and physical properties of a radiation-induced and cured epoxy/acrylate blend containing 0.3 to 1.0 wt.% WS₂ NPs. Experimental results indicate that the tensile toughness increased by 22% upon optimizing the NP content compared to that of WS₂-free formulations. Tensile fractured surfaces with different WS₂ NP contents were analyzed with a scanning electron microscope and an atomic force microscope and showed distinctive morphology depending on the WS₂ NP content, supporting the results of the tensile test. The energy required to break shear adhesion specimens demonstrated an increase of up to 60% compared to that of the neat resin. The glass transition temperature determined by dynamic mechanical analysis presented similar or higher values upon WS₂ NP incorporation. Furthermore, up to 80% improvement in impact strength was demonstrated when WS₂ NPs were dispersed in the epoxy/acrylate blend. It was concluded that the surface chemistry and dispersion level of the WS₂ NPs are the major variables affecting the macro properties of cationically radiation-cured resins and their adhesion properties. This study is the first to demonstrate the possibility for radiation-induced curing of opaque NPs based on WS₂ that serve as both a reinforcement nanoparticle at low concentrations and an enhancement of the degree of curing. Full article

Cationic photo-initiated and polymerized epoxies are characterized by good adhesion, high modulus, zero volatiles, low shrinkage and living polymerization characteristics. Radiation—cured acrylate resins are characterized by rapid initial curing with increased initial strength. The combination of radiation-cured acrylates and epoxies may present advantageous attributes. Thus, the system investigated is a hybrid epoxy/methyl acrylate and three different initiators for cationic polymerization of epoxies, the radical reaction of acrylates and the thermal initiator. When incorporating additives like opaque WS₂ nanoparticles (NPs), absorption of the photo radiation takes place, which may lead to low photo activity. Curing kinetics measurements revealed that the absorbing/masking effect of WS₂ was insignificant, and surprisingly, the level of curing was enhanced when the WS₂ NPs were incorporated. FTIR results demonstrated that covalent bonds were formed between the inorganic fullerenes (IF-WS₂) and the crosslinked matrix. Viscosity measurements showed a surprising reduction of five to ten times in the low-shear viscosity upon NPs incorporation compared to neat resins. It was concluded that the decrease of viscosity by the inorganic NPs, in addition to the enhanced level of conversion, has profound advantages for structural adhesives and 3D printing resins. To the best of our knowledge, this investigation is the first to report on a radiation-induced curing system containing opaque WS₂ NPs that leads to an enhanced degree of curing and reduced shear viscosity. Full article