Search Results (546)

As a veterinary drug, sulfamethazine is frequently used to control animal diseases. In this study, a novel molecularly imprinted photonic crystal sensor for the fast visual detection of sulfamethazine in milk and chicken has been developed. Under optimum preparation conditions, a molecularly imprinted, photonic crystal with an anti-opal structure and a clear bright color was prepared and characterized. The adsorption conditions, including adsorption solvent, solvent pH, and detection time, were studied in detailed. Based on its excellent selectivity and fast response, a photonic crystal sensor detection method for the quantitative analysis of sulfamethazine was established, which achieved good linearity, ranging from 10⁻⁴ mg/L to 10 mg/L, a limit detection of 1.16 μg/L, and spiked recoveries of 80.56% to 103.59%, with a relative standard deviation (RSD) <6.41%. More importantly, the detection process could be completed within 3 min. This method provides an alternative for the rapid screening of sulfamethazine in food samples. Full article

Dual- or multi-template molecularly imprinted polymers have been an attractive research field for many years as they allow simultaneous detection of more than one target with high selectivity and sensitivity by creating template-specific recognition sites for multiple targets on the same functional monomer. Dual/multi-template molecular imprinting techniques have been applied to identify, extract, and detect many targets, from heavy metal ions to viruses, by different methods, such as high-performance liquid chromatography (HPLC), liquid chromatography–mass spectrometry (LC-MS), and piezoelectric, optical, and electrochemical methods. This article focuses on electrochemical sensors based on dual/multi-template molecularly imprinted polymers detecting a wide range of targets by electrochemical methods. Furthermore, this work highlights the use of these sensors for point-of-care applications, their commercialization and their integration with microfluidic systems. Full article

This review provides an overview of recent developments in Citrus aurantium L. (sour or bitter orange), focusing on its bioactive compounds, innovative extraction techniques, and technological applications. C. aurantium is rich in bioactive compounds such as flavonoids (naringin, hesperidin, kaempferol, quercetin), essential oils (β-pinene, limonene), and vitamin C, which represents significant biological activities including antioxidant, antimicrobial, anti-inflammatory, and anticancer effects. The review discusses traditional extraction methods, such as solvent extraction and hydrodistillation, alongside newer, eco-friendly approaches like ultrasound-assisted extraction, microwave-assisted extraction, supercritical fluid extraction, and natural deep eutectic solvents. It also highlights cutting-edge techniques, including molecular imprinting polymer-based extraction, which enable the more efficient enrichment and purification of specific compounds like synephrine. Finally, the review examines the diverse industrial applications of these bioactive compounds in sectors such as foods, pharmaceuticals, and cosmetics, while emphasizing the growing need for sustainable and efficient extraction technologies. Full article

Oseltamivir is a drug that has been widely used to prevent and treat influenza A and B. In this work, an ultrasensitive, simple, and novel electrochemiluminescence (ECL) sensor combined with molecularly imprinted polymers (MIP-ECL) based on a graphene-like two-dimensional material, Mxene quantum dots (MQDs) was constructed to selectively detect oseltamivir. A molecularly imprinted polymer membrane containing an oseltamivir template was constructed by electropolymerization and elution of modified MQDs on a glassy carbon electrode. Under optimized experimental conditions, the MIP-ECL sensor could detect oseltamivir in the range of 10⁻¹⁰ to 10⁻⁶ M (R² = 0.9816), with a low limit of detection of 6.5 × 10⁻¹¹ M (S/N = 3), and the recovery rates of oseltamivir in biological samples were 92.21–104.2%, with relative standard deviations of 3.70%~5.70%. The developed MIP-ECL sensor provides a new idea for detecting oseltamivir, which was successfully applied to the determination of oseltamivir in serum samples, indicating great potential for application in clinical diagnostics. Full article

Chrysoidin (CG) can be ingested into the human body through the skin and cause chronic toxicity, so the detection of CG levels in the environment is crucial. In this study, we synthesize F-Ag@ZIF-8/PVC molecular-imprinted membranes (FZAP-MIM) by an innovative combination of SERS detection, membrane separation, and a molecular-imprinted technique in order to perform the analysis of CG in water. The plasmonic MOF material as a SERS substrate helps to enrich the target and realize the spatial overlap of the target with the nanoparticle tip “hotspot”. To avoid the poor reproducibility of Raman signals caused by the random arrangement of the powder substrate, polyvinyl chloride (PVC) is used to provide support and protection for the powder substrate. PVC has excellent dirt immunity and chemical stability, enabling the substrate to maintain Raman performance under complex and extreme detection conditions. FAZP-MIM has outstanding sensitivity and selectivity and can quickly and accurately capture targets even in the presence of similar structural interferences. The method showed superior recoveries in spiked recovery tests of real water samples and is expected to be practically applied to the trace detection of organic dye molecules in the environment. Full article

Rosmarinic acid (RA) is a natural active compound widely found in many plants belonging to the family of Lamiaceae, Boraginaceae, and so on, which has various important bioactivities, including being anti-oxidative, anti-inflammatory, antiviral, etc. Herein, novel hydrophilic magnetic molecularly imprinted polymers (HMMIPs) with a regular core-shell structure were successfully developed using RA as a template molecule, acrylamide (AM) as a functional monomer, N-N ’methylenebisacrylamide (MBA) as a cross-linking agent, and water as the porogen. After a series of characterization and adsorption performance analyses, it was found that HMMIPs are hydrophilic with an adsorption capacity of 8.012 ± 0.54 mg/g, an imprinting factor of 3.64, and a selectivity coefficient of 2.63~2.91. Furthermore, the HMMIPs can be rapidly separated from other components under the influence of external magnetic fields. The HMMIPs were employed for the determination of RA present in the Perilla frutescens and Rosmarinus officinalis aqueous extract with recoveries of 88.2~107.3%. These results indicated that HMMIPs of RA have the benefits of straightforward operation, rapid adsorption, and high selectivity, rendering it an appropriate way for the expedient and selective isolation of RA in an intricate matrix. Full article

In this paper, a novel molecularly imprinted polymer membrane modified glassy carbon electrode for electrochemical sensors (MIP-OH-MWCNTs-GCE) for epinephrine (EP) was successfully prepared by a gel-sol method using an optimized functional monomer oligosilsesquioxane-Al₂O₃ sol-ITO composite sol (ITO-POSS-Al₂O₃). Hydroxylated multi-walled carbon nanotubes (OH-MWCNTs) were introduced during the modification of the electrodes, and the electrochemical behavior of EP on the molecularly imprinted electrochemical sensors was probed by the differential pulse velocity (DPV) method. The experimental conditions were optimized. Under the optimized conditions, the response peak current values showed a good linear relationship with the epinephrine concentration in the range of 0.0014–2.12 μM, and the detection limit was 4.656 × 10⁻¹¹ M. The prepared molecularly imprinted electrochemical sensor was successfully applied to the detection of actual samples of horse serum with recoveries of 94.97–101.36% (RSD), which indicated that the constructed molecularly imprinted membrane electrochemical sensor has a high detection accuracy for epinephrine in horse blood, and that it has a better value for practical application. Full article

Molecularly imprinted polymers (MIPs) are synthetic receptors designed to selectively bind specific molecules, mimicking natural antibody–antigen interactions. Produced through polymerization around a target molecule (template), MIPs create imprints that confer high specificity and binding affinity upon template removal. Initially developed in the 1970s with organic polymers, MIPs now play critical roles in separation sciences, catalysis, drug delivery, and sensor technology. In forensic science, MIPs offer potential for sample preparation, pre-concentration, and analyte detection, especially with complex biological and non-biological matrices. They exhibit superior stability under extreme conditions, enabling their use in challenging forensic contexts such as detecting new psychoactive substances or trace explosives. Despite advantages like reusability and high selectivity, MIPs face limitations in forensic analysis due to their complex synthesis, potential template leakage, and non-specific binding. Moreover, the lack of standardized protocols limits their mainstream adoption, as forensic applications require validated, reproducible methods. This review systematically assesses MIPs in forensic toxicology, focusing on their current capabilities, limitations, and potential for broader integration into forensic workflows. Future research should address standardization and evaluate MIPs’ effectiveness in diverse forensic applications to realize their full potential. Full article

Background: Major diagnostic and therapeutic changes led to the implementation of the ‘lung cancer diagnosis in small biopsies and cytology specimens’ concept in the WHO Classification of Tumours of the Lung, Pleura, Thymus and Heart in 2015. Touch imprints are an established technique in cytology that provides a rapid and minimally invasive method for morphological diagnoses of clinical specimens, accurate subtyping, and molecular characterizations of malignancies. The extended diagnostic requirements from the increasingly limited material provided by minimally invasive biopsy techniques pose major challenges for pathology. Recognizing the relevant features and potential pitfalls is essential for cytologists to avoid misinterpretation. Materials and Methods: A retrospective analysis of endoscopic and surgical biopsy diagnostics was performed on 717 patients (303 women and 414 men; average age of 66.9 years) with clinically suspicious tumor findings at the LungenClinic Grosshansdorf in 2020. A total of 1363 cytological samples were obtained pre-therapeutically from 986 distinct biopsies covering 330 surgically and 656 endoscopically examined pulmonary, mediastinal, and bronchial regions. These samples were then compared with the histological diagnoses that were critical for determining the final therapy. Results: Out of a total of 656 endoscopically examined cases, 322 were classified as malignant, 308 as benign, and 26 as undetermined. While touch imprints and histological analysis separately achieved specificity values of 95.4% and 98.8%, both methods showed sensitivity values of 82.1% and 86.5%, respectively. In contrast, combining the two methods improved the sensitivity by 8 percentage points to 94.6%. Out of 330 cases of surgically examined samples, 137 were malignant, 190 were benign, and 3 were undetermined. The specificity of the morphological examinations for these samples was comparably high at 97.9% and 100%, respectively. In this surgical setting, touch imprints alone achieved a sensitivity of 75.9% (n = 104/137 cases), with a specificity of 97.9% (n = 186/190 cases). The outcome of the histological approach alone and in combination with touch imprints reached a sensitivity of 96.4% (n = 132/137 cases). Conclusions: Cytology and histology achieved comparably high sensitivity and specificity values on small biopsies. Under optimal conditions for morphological analysis in a surgical setting, the sensitivity of cytology for detecting malignant tumors was only 6 percentage points lower compared with the clinical endoscopic setting. A combined approach of cytologic–histologic evaluation for endoscopically examined specimens significantly increased the sensitivity by approximately 8% compared with the surgical setting (p < 0.003). Full article

Molecularly imprinted polymers (MIPs) are defined as artificial receptors due to their selectivity and specificity. Their advantageous properties compared to biological alternatives have sparked interest among scientists, as detailed in numerous review papers. Currently, there is significant attention on adhering to the principles of green chemistry and environmental protection. In this context, MIP research groups have focused on developing eco-friendly procedures. The application of “greener” monomers and reagents, along with the utilization of computational methodologies for design and property analysis, are two activities that align with the green chemistry principles for molecularly imprinted technology. This review discusses the application of computational methodologies in the preparation of MIPs based on eco-friendly non-acrylic/vinylic monomers and precursors, such as alkoxysilanes, ionic liquids, deep eutectic solvents, bio-based molecules—specifically saccharides, and biomolecules like proteins. It provides a brief introduction to MIP materials, the green aspects of MIP production, and the application of computational simulations. Following this, brief descriptions of the studied monomers, molecular simulation studies of green monomer-based MIPs, and computational strategies are presented. Finally, conclusions and an outlook on the future directions of computational analysis in the production of green imprinted materials are pointed out. To the best of my knowledge, this work is the first to combine these two aspects of MIP green chemistry principles. Full article

Background/Objectives: Adrenocortical tumors (ACTs), including adrenocortical adenoma (ACA) and carcinoma (ACC), represent 0.3–0.4% of pediatric tumors. Beckwith–Wiedemann spectrum (BWSp) confer an increased risk of ACTs, but prognosis, management, and associated molecular characteristics are unclear. Methods: This paper combines a literature review of 54 published cases of BWSp-ACT with a report of one newly identified patient, totaling 55 cases with a confirmed BWSp clinical and/or molecular diagnosis. Results: Nineteen patients with ACA, 33 with ACC, and 3 with ACT of uncertain malignant potential (umACT) were included. Twenty patients had uniparental disomy of chromosome 11p15.5 (patUPD11), 11imprinting Center 2 Loss-of-methylation (IC2-LoM), and had 2 11p15 locus duplication. Eleven patients were diagnosed during cancer screening procedures, including two metastatic at diagnosis ACC. Conclusions: Almost half of ACC patients reached the minimum score for clinical BWSp diagnosis only after ACC onset, suggesting that the BWSp score has limited value for the early diagnosis in such a setting. Two patients with metastatic ACC had a histopathological Wieneke score ≤2, not correlating with clinical malignancy and confirming limitations of the current histopathological classification, as previously documented. Ultrasound screening failed identifying the ACC before metastasis in two cases, indicating an urgent need to develop new strategies for screening of ACTs in BWSp. Furthermore, some cases of metastatic ACC exhibited unexpectedly indolent behavior despite being malignant. Full article

This study investigates the electrospinning and rheological properties of polyethylene terephthalate (PET) and polyvinyl alcohol (PVA) with varying degrees of hydrolysis (DH) for molecularly imprinted polymer (MIP) incorporation. The morphology and properties of the electrospun nanofibers were evaluated, revealing that PVA nanofibers exhibited smoother and more uniform structures compared to PET fibers. The rheological behavior of the polymer solutions was also characterized, showing that PVA 99 DH solution exhibited shear-thinning behavior due to the unique structural properties of the polymer chains. The introduction of MIP and NIP additives had no significant impact on the rheological properties, except for PVA 99 MIP and NIP solutions, which showed deviations from Newtonian behavior. The electrospun MIP nanofibers showed a conductivity of 1054 µS/cm for PVA (87–90% DH) and a viscosity of 165.5 mPa·s, leading to optimal fiber formation, while displaying a good adsorption capacity of 0.36 mg for PVA-MIP to effectively target pharmaceuticals such as emtricitabine and tenofovir disoproxil, showing their potential for advanced water treatment applications. The results suggest that the electrospinning process and rheological properties of the polymer solutions are influenced by the molecular structure and interactions within the polymer matrix, which can be exploited to tailor the properties of MIPs for specific applications. Full article

Surface plasmon resonance (SPR) sensors have emerged as a powerful tool in biosensing applications due to their ability to provide sensitive and real-time detection of chemical and biological analytes. This review focuses on the development and application of molecularly imprinted polymer (MIP)-based SPR sensors for food analysis. By combining the high selectivity of molecular imprinting techniques with the sensitivity of SPR, these sensors offer significant advantages in detecting food contaminants and other target molecules. The article covers the basic principles of SPR, the role of MIPs in sensor specificity, recent advancements in this sensor development, and food applications. Furthermore, the potential for these sensors to contribute to food safety and quality control was explored, showcasing their adaptability to complex food matrices. The review concluded the future directions and challenges of SPR-MIP sensors in food analysis, emphasizing their promise in achieving high-throughput, cost-effective, and portable sensing solutions. Full article

Molecularly imprinted polymers (MIPs) can specifically recognize template molecules in solution with imprinted cavities. Due to their capacity for scalable production, they can be used to isolate target products from natural products for industrial production in the fields of pharmaceuticals and food. In this study, magnetic single-template molecularly imprinted polymers (St-MIPs) instead of magnetic multi-template molecularly imprinted polymers (Mt-MIPs) were prepared by surface imprinting using Schizandrol A as a template molecule and deep eutectic solvent (DES) as a functional monomer, combined with solid-phase extraction (SPE) for the adsorption and separation of Schizandrol A, Schisantherin A, Schizandrin A, and Schizandrin B from Schisandra chinensis (Turcz.) Baill. (S. chinensis) fruits extracts. The synthesized MIPs were characterized by FT-IR, TEM, SEM, TG, XRD and VSM, and their adsorption properties were also evaluated. MIPs can specifically recognize the template molecules with high reusability. The purity of the total S. chinensis lignans after SPE was 74.05%, among which that of Schizandrol A, Schisantherin A, Schizandrin A, and Schizandrin B was 33.38%, 8.69%, 16.33% and 15.67%, respectively. Moreover, the one-step synthesis of carrier was easy to operate. And St-MIPs reduced the production cost compared with Mt-MIPs. This study provides a new idea for natural product separation by molecular imprinting technology (MIT). Full article

B-type natriuretic peptides (BNP) are produced and secreted by the myocardium to reduce blood pressure and cardiac load. They cause vasodilation, natriuresis, growth suppression, and inhibition of the sympathetic nervous system and the renin–angiotensin–aldosterone system. The measurement of plasma BNP levels provides clinically useful information concerning the diagnosis and management of left ventricular dysfunction and heart failure, complementing other diagnostic testing procedures. In this work, three epitopes from the N-terminal (BNPnt), C-terminal (BNPct), and the cystine-bridged cyclic peptides (BNPr) of B-type natriuretic peptides were synthesized as templates for molecular imprinting. These peptides were doped into aniline (AN) and m-aminobenzenesulfonic acid (MSAN) for electropolymerization, thus forming epitope-imprinted poly(AN-co-MSAN) conductive films (EIPs). The monomer ratio was optimized using the electrochemical signals during polymerization. The optimized films were then characterized using a scanning electron microscope (SEM), atomic force microscope (AFM), and AC impedance. The electrochemical response of the films to the target peptides and to BNP was then measured. The sensing range of the EIPs-coated electrodes was from 0.001 to 1000 pg/mL for BNP. Finally, the BNP concentration in diluted serum samples was measured with the BNPrIP-coated electrode, giving 3.15 ± 0.07 pg/mL. By spiking the sample with known BNP concentrations, the accuracy was determined to be better than ±5%. Full article