Search Results (323)

Increasing the flame retardancy of lignocellulosic materials such as Miscanthus × giganteus can effectively enable their wide use. This study examines the fireproofing process of Miscanthus particles using an eco-friendly process by grafting phytic acid and urea in aqueous solution. Miscanthus particles underwent a steam explosion step before being grafted. Fireproof binderless particle panels were manufactured from miscanthus particles with or without adding olive pomace by hot-pressing. The effect of the steam explosion and/or the flame-retardant treatment on the morphology, chemical composition and thermal stability of the particles, as well as the thermal stability of the panels, was investigated. The results showed that water impregnation followed by a steam explosion at 210 °C for 8 min resulted in particles that were rich in lignin and more homogeneous in size (length and width). Fireproof particles were produced with relatively low P and N contents. The flame retardancy of the binderless particle panels was significantly improved when using miscanthus particles treated with phytic acid and urea, as shown by a reduced heat release (HRR) and an increased time-to-ignition. However, the presence of olive pomace significantly decreased the flame retardancy of the panels. Binderless particle panels prepared from grafted miscanthus particles showed the best fire properties and are considered fireproof. Full article

With rising demand for wood products and reduced wood harvesting due to the European Green Deal, alternative lignocellulosic materials for insulation are necessary. In this work, we manufactured reference particleboard from industrial particles and fifteen different board variants from alternative lignocellulosic plants material, i.e., five types of perennial plant biomass in three substitutions: 30, 50 and 75% of their share in the board with a nominal density of 250 kg/m³. Within the analysis of manufactured boards, the mechanical, chemical and thermal properties were investigated—internal bond, formaldehyde emissions, thermal insulation, heat transfer coefficient and thermal conductivity. In the case of thermal conductivity, the most promising results from a practical point of view (W/mK < 0.07) were obtained with Sida hermaphrodita and Miscanthus, achieving the best results at 50% substitution. The lowest formaldehyde emissions were recorded for boards with Panicum virgatum and Miscanthus, highlighting their positive environmental performance. In terms of mechanical properties, the highest internal bond was noticed in particleboards with a 30% substitution of Spartina pectinata and Miscanthus. Research findings confirm the potential of perennial plants as a sustainable source of raw materials for insulation panel manufacturing. Despite needing improvements in mechanical properties, most notably internal bond strength, these plants offer an ecologically responsible solution aligned with global construction trends, thus lessening reliance on traditional wood products. Thus, long-term benefits may be realized through the strategic combination of diverse raw materials within a single particleboard. Full article

This study focused on three drought-tolerant grasses, namely Miscanthus sinensis ‘Gracillimus’ (Mis), Pennisetum alopecuroides ‘Ziguang’ (Pen), and Elytrigia repens (L.) Nevski ‘Jingcao No. 2′ (Ely), selected from nine species. Despite limited knowledge regarding their tolerance to submergence and responses to this stress, these three grasses were chosen for investigation. The three grass species were exposed to varying durations of submergence (0, 1, 3, 5, 7, 9, and 11 days) in a greenhouse setting. Subsequently, their growth characteristics, physiological traits, and nitrogen accumulation were evaluated. The study found that all three grass species exhibited flood tolerance, with Mis showing the strongest resistance. Under an 11-day flooding treatment, there was no significant trend in the above-ground biomass of Mis. Flooding significantly reduced the root-to-stem ratio, with Pen and Ely exhibiting more pronounced declines than Mis. The chlorophyll content in Mis decreased by 38%, compared to 41% in Pen and 60% in Ely. The root activity of the most affected species dropped by 88.6%, and nitrogen accumulation was inhibited with longer flooding durations. Pen’s nitrogen levels decreased significantly across treatments, while no significant changes were observed in Mis. Ely’s nitrogen assimilation initially increased until T4, after which it began to decline, reflecting similar trends in above-ground biomass. These findings suggest that flood tolerance is linked to nutrient uptake and photosynthetic capacity, highlighting Mis as the most suitable grass species for flood-prone areas and recommending its use in ecological ditch construction in China. This study provides material selection for the construction of ecological ditches. Full article

The mechanical properties of lignin, an aromatic heteropolymer constituting 20–30% plant biomass, are important to the fabrication and processing of lignin-based sustainable polymeric materials. In this study, atomistic simulations are performed to provide microscopic insights into the mechanics of lignin. Representative samples of miscanthus, spruce, and birch lignin are studied. At room temperature below the glass transition temperature, the stress–strain curves for uniaxial compression and tensile loading are calculated and analyzed. The results show that lignin possesses rigidity with a Young’s modulus in the order of GPa and exhibits strain hardening under strong compression. Meanwhile, lignin is brittle and fails through the microscopic mechanism of cavitation and chain pullout under local tensile loading. In addition to the three common lignin samples, minimalist model systems of monodisperse linear chains consisting of only guaiacyl units and β-O-4 linkages are simulated. Systematic variation of the model lignin chain length allows a focused examination of the molecular weight effects. The results show that the molecular weight does not affect the Young’s modulus much, but higher molecular weight results in stronger strain hardening under compression. In the range of molecular weight studied, the lignin chains are not long enough to arrest the catastrophic chain pullout, explaining the brittleness of real lignin samples. This work demonstrates that the recently modified CHARMM force fields and the accompanying structural information of real lignin samples properly capture the mechanics of lignin, offering an in silico microscope to explore the atomistic details necessary for the valorizaiton of lignin. Full article

This study investigates Miscanthus biochar’s potential to reduce ammonia (NH₃) emissions in poultry production. Biochar from lignocellulosic biomass has proven a versatile tool in environmental remediation for water, soil, and air quality applications with ample opportunity for inclusion in agricultural systems. Ammonia emissions present a concern for animal/human health and the environment. The impacts of biochar production temperature (400 and 700 °C), organic acid activation (acetic acid, citric acid), and application rate (0.24 and 0.49 kg m⁻²) on broiler litter NH₃ emissions were evaluated. Biochar production parameters, i.e., temperature, and acid type were found to significantly impact its performance as an NH₃ control measure. The following factors, ranked by magnitude of impact, were found to statistically impact the NH₃ emission rate: biochar application rate (p < 0.001), biochar production temperature (p = 0.003), and lastly acid type (p = 0.007). The best performing biochar was produced at 400 °C, activated with acetic acid, and applied at a high addition rate (0.49 kg m⁻²). This treatment reduced cumulative NH₃ volatilization after 2 weeks by 19.7%. Full article

Lake Winona is a 129-hectare urban lake which occupies part of an old side channel of the Mississippi River and has been modified significantly over the past 125 years. The entire shoreline (>8 km) is publicly owned, with current shorelines created mostly during two periods of lake dredging and filling of fringe wetlands 70 and 110 years ago, respectively. Since then, some sections were allowed to revegetate naturally with trees and shrubs, some were armored with riprap, and others have been maintained mostly as turfgrass parklands. Shoreline vegetation assessments and tree stand surveys were completed prior to beginning targeted shoreline rehabilitation in 2017. These rehabilitation activities (encompassing the majority of shoreline) include the following: (1) repeated removal and chemical treatment of woody invasive shrubs/trees (primarily common buckthorn Rhamnus cathartica and nonnative bush honeysuckles Lonicera spp.) by contractors and volunteers; (2) chemical spraying and hand pulling of nonnative invasive ornamental grasses (Miscanthus spp.) and forbs (Japanese hops Humulus japonica; leafy spurge Euphorbia esula) annually or as needed; (3) killing of turfgrass and overseeding with native prairie species; (4) shrub and sapling plantings and overseeding with native species in both wooded and turfgrass sections; (5) installation of wave barriers (using cut woody invasives) and planting of emergent aquatic macrophytes; (6) prescribed burns of prairie plantings; (7) establishment of fixed photo reference points to document changes; and (8) altered park mowing practices to maintain a shoreline buffer of vegetation. These ongoing management activities aim to replace more turfgrass with native prairie, plant more shrubs and trees on shorelines, suppress nonnative invasives, and encourage the development of aquatic macrophyte beds to reduce, or eliminate shoreline erosion. Future management activities will continue to emphasize invasive species control, turfgrass conversion to native vegetation, and shoreline erosion reduction. Full article

Miscanthus (Miscanthus × giganteus) and Willow (Salix spp.) are promising bioenergy crops due to their high biomass yields and adaptability to diverse climatic conditions. This study applies the MiscanFor/SalixFor models to assess the sustainability of these crops under current and future climate scenarios, focusing on biomass productivity, carbon intensity (CI), and energy use efficiency (EUE). Under present conditions, both crops show high productivity in tropical and subtropical regions, with Miscanthus generally outperforming Willow. Productivity declines in less favourable climates, emphasising the crops’ sensitivity to environmental factors at the regional scale. The average productivity for Miscanthus and Willow was 19.9 t/ha and 10.4 t/ha, respectively. Future climate scenarios (A1F1, representing world markets and fossil-fuel-intensive, and B1, representing global sustainability) project significant shifts, with northern and central regions becoming more viable for cultivation due to warmer temperatures and extended growing seasons. However, southern and arid regions may experience reduced productivity, reflecting the uneven impacts of climate change. Miscanthus and Willow are predicted to show productivity declines of 15% and 8% and 12% and 7% under A1F1 and B1, respectively. CI analysis reveals substantial spatial variability, with higher values in industrialised and temperate regions due to intensive agricultural practices. Future scenarios indicate increased CI in northern latitudes due to intensified land use, while certain Southern Hemisphere regions may stabilise or reduce CI through mitigation strategies. Under climate change, CI for Miscanthus is projected to increase by over 100%, while Willow shows an increase of 64% and 57% for A1F1 and B1, respectively. EUE patterns suggest that both crops perform optimally in tropical and subtropical climates. Miscanthus shows a slight advantage in EUE, though Willow demonstrates greater adaptability in temperate regions. Climate change is expected to reduce EUE for Miscanthus by 10% and 7% and for Willow by 9% and 6%. This study underscores the need for region-specific strategies to optimise the sustainability of bioenergy crops under changing climate conditions. Full article

The present study aimed to determine the effect of material modification by hot water extraction (HWE) on the compaction efficiency of shredded Miscanthus giganteus stalks in the pellet production process. Samples were prepared to differ in the number of HWE cycles: HWE I was subjected to a single cycle, HWE II was subjected to two cycles, and HWE III was subjected to three cycles and unmodified material. An analysis of the compaction process was carried out to evaluate the effect of HWE on density and energy consumption. In this study, HWE pre-treatment was applied to improve biomass compaction efficiency and material properties, improving biofuel production’s sustainability and efficiency. A small change was found in glucose and xylose content, suggesting that HWE slightly affects these sugars. It was found that HWE significantly increased the density of compacted Miscanthus giganteus biomass, with a peak density of 388.7 kg·m⁻³ after the first HWE cycle. Ash content was reduced by 50% after one HWE cycle, making the biomass more suitable for biofuel applications. Furthermore, pretreatment with HWE reduced energy consumption during compaction, enhancing process efficiency. This study highlights the role of hot water extraction (HWE) in improving miscanthus compaction, enhancing density, reducing ash, and lowering energy use. Full article

Biomass can be used for electricity generation, especially in developing countries, but also in developed ones, where the utilization of renewable energy sources is being integrated into a sustainable economy. There are considerable differences in the scale of biomass use and in the technology of its processing. One of the most important sources of biofuel is the biomass of grass. This research aimed to determine the long-term effects of organic fertilizers on cellulose, hemicellulose, and lignin content in the biomass of three grass species: giant miscanthus (Miscanthus × giganteus), prairie cordgrass (Spartina pectinata), and switchgrass (Panicum virgatum L.) in the first three years of growth. The experiment was established in four replications on microplots of 2 m² in April 2018. Before planting grass rhizomes, municipal sewage sludge (SS) and spent mushroom substrate (SMS) were introduced into the soil in various combinations. Biomass is harvested in December every year. The content of structural polysaccharides in the grass species statistically significantly varied in response to organic waste. Compared to other fertilizer combinations, SS application increased the content of cellulose in the biomass of Miscanthus giganteus (43.66% of DM) and Spartina pectinata (37.69% of DM) and hemicellulose in Spartina pectinata (27.80% of DM) and Panicum virgatum (23.64% of DM). Of the three species of grass, the chemical composition of Miscanthus giganteus cell walls was the most favorable for biofuel production, with the most cellulose and hemicellulose and the least lignin compared to other grass species. The content of lignin in the biomass of Miscanthus × giganteus and Spartina pectinata was the greatest on the plot with SMS and amounted to 7.79% of DM and 12.32% of DM, respectively. In the case of Panicum virgatum, the average content of lignin was similar across all fertilized plots, with 15.42% DM. Full article

Soil organic carbon (SOC) fractions are vital intrinsic indicators of SOC stability, and soil fungi are the key drivers of soil carbon cycling. However, variations in SOC fractions along an elevational gradient in mountain meadows and the role of the fungal community in regulating these variations are largely unknown, especially in subtropical areas. In this study, an elevation gradient experiment (with experimental sites at 1500, 1700, and 1900 m) was set up in a Miscanthus sinensis community in a meadow on Wugong Mountain, Southeast China, to clarify the effects of elevation on soil fungal community composition, microbial residue carbon, and SOC fractions. The results showed that the contribution of soil microbial residue carbon to SOC was only 16.1%, and the contribution of soil fungal residue carbon to SOC (15.3%) was far greater than that of bacterial residue carbon (0.3%). An increase in elevation changed the fungal community structure and diversity, especially in the topsoil (0–20 cm depth) compared with that in the subsoil (20–40 cm depth), but did not affect fungal residue carbon in the two soil layers. When separating SOC into the fractions mineral-associated organic carbon (MAOC) and particulate organic carbon (POC), we found that the contribution of MAOC (66.6%) to SOC was significantly higher than that of POC (20.6%). Although an increased elevation did not affect the SOC concentration, it significantly changed the SOC fractions in the topsoil and subsoil. The soil POC concentration and its contribution to SOC increased with an increasing elevation, whereas soil MAOC showed the opposite response. The elevational variations in SOC fractions and the POC/MAOC ratio were co-regulated by the fungal community structure and total nitrogen. Our results suggested that SOC stabilization in mountain meadows decreases with an increasing elevation and is driven by the fungal community structure, providing scientific guidance for SOC sequestration and stability in mountain meadows in subtropical areas. Full article

High salinity poses a significant threat to arable land globally and contributes to desertification. Growth-promoting rhizobacteria assist plants in mitigating abiotic stresses and enhancing crop productivity through the production of siderophores, exopolysaccharides (EPS), solubilisation of phosphate, indole-3-acetic acid (IAA), and other secondary metabolites. This study aimed to isolate, identify, and characterise bacteria that exhibit robust growth-promoting properties. A total of 64 bacterial isolates from the rhizosphere of Miscanthus sinensis were evaluated for plant growth-promoting (PGP) traits, including IAA, EPS, siderophores, and solubilisation of phosphate. Among them, five isolates were selected as plant growth-promoting rhizobacteria (PGPR) based on their PGP features and identified via 16S rRNA sequencing: Enterococcus mundtii strain INJ1 (OR122486), Lysinibacillus fusiformis strain INJ2 (OR122488), Lysinibacillus sphaericus strain MIIA20 (OR122490), Pseudomonas qingdaonensis strain BD1 (OR122487), and Pseudomonas qingdaonensis strain MIA20 (OR122489), all documented in NCBI GenBank. BD1 demonstrated a higher production of superoxide dismutase (SOD) (17.93 U/mg mL), catalase (CAT) (91.17 U/mg mL), and glutathione (GSH) (0.18 U/mg mL), along with higher concentrations of IAA (31.69 µg/mL) and salicylic acid (SA) (14.08 ng/mL). These isolates also produced significant quantities of amino and organic acids. BD1 exhibited superior PGP traits compared to other isolates. Furthermore, the NaCl tolerance of these bacterial isolates was assessed by measuring their growth at concentrations ranging from 0 to 200 mM at 8-h intervals. Optical density (OD) measurements indicated that BD1 and INJ2 displayed significant tolerance to salt stress. The utilisation of these isolates, which enhances plant growth and PGP traits under salt stress, may improve plant development under saline conditions. Full article

Both annual (cotton, flax, hemp, etc.) and perennial (trees and grasses) plants can serve as a source of cellulose for fiber production. In recent years, the perennial herbaceous plant miscanthus has attracted particular interest as a popular industrial plant with enormous potential. This industrial crop, which contains up to 57% cellulose, serves as a raw material in the chemical and biotechnology sectors. This study proposes for the first time the utilization of miscanthus, namely Miscanthus Giganteus “KAMIS”, to generate spinning solutions in N-methylmorpholine-N-oxide. Miscanthus cellulose’s properties were identified using standard methods for determining the constituent composition, including also IR and atomic emission spectroscopy. The dry-jet wet method was used to make fibers from cellulose solutions with an appropriate viscosity/elasticity ratio. The structural characteristics of the fibers were studied using IR and scanning electron microscopy, as well as via X-ray structural analysis. The mechanical and thermal properties of the novel type of hydrated cellulose fibers demonstrated the possibility of producing high-quality fibers from miscanthus. Full article

The dwindling availability of agricultural land, caused by factors such as rapid population growth, urban expansion, and soil contamination, has significantly increased the pressure on food production. To address this challenge, cultivating non-food crops on contaminated land has emerged as a promising solution. This approach not only frees up fertile soil for food production but also mitigates human exposure to contaminants. This work aimed to examine the impact of soil contamination with Cd, Pb, Ni, and Zn on the growth, productivity, metal accumulation, and the tolerance of five lignocellulosic non-food crops: switchgrass (Panicum virgatum L.), biomass sorghum (Sorghum bicolor L. Moench), giant reed (Arundo donax L.), African fodder cane (Saccharum spontaneum L. spp. aegyptiacum Willd. Hackel), and miscanthus (Miscanthus × giganteus Greef et Deu.). A two-year pot experiment was conducted in Greece, Italy, and Portugal, following the same protocols and applying various levels of metals: Cd (0, 4, 8 mg kg⁻¹), Pb and Zn (0, 450, 900 mg kg⁻¹), and Ni (0, 110, 220 mg kg⁻¹). The experimental design was completely randomized, with three replicates for each treatment. The results showed that switchgrass and sorghum generally maintained their height and productivity under Cd and Pb stress but were adversely affected by high Zn and Ni concentrations. Giant reed and African fodder cane showed reduced height and productivity at higher Ni and Zn levels. Miscanthus exhibited resilience in height but experienced productivity reductions only at the highest Zn concentration. Heavy metal uptake varied among crops, with switchgrass and sorghum showing high Cd and Pb uptake, while giant reed accumulated the most Cd and Zn. Miscanthus had the highest Ni accumulation. The tolerance indices indicated that switchgrass and sorghum were more tolerant to Cd and Zn at lower concentrations, whereas miscanthus had lower tolerance to Cd but a higher tolerance to Zn at higher concentrations. Giant reed and African fodder cane demonstrated stable tolerance across most heavy metals. Accumulation indices highlighted the effectiveness of switchgrass and sorghum in Cd and Pb uptake, while miscanthus excelled in Ni and Zn accumulation. The cluster analysis revealed similar responses to heavy metal stress between African fodder cane and giant reed, as well as between sorghum and miscanthus, with switchgrass displaying distinct behavior. Overall, the study highlights the differential tolerance and accumulation capacities of these crops, indicating the potential for phytoremediation applications and biomass production in heavy metal-contaminated soils. Full article

Recycling olive waste, a major by-product of the olive oil industry, presents significant environmental and economic benefits. This study explores the potential of olive waste (OW) by-products, specifically their individual components such as olive stones (OS), olive oily pomace (OS) and olive oil-free pomace (OF), as sustainable alternatives to wood in eco-friendly composite materials, alongside other residues such as miscanthus, spent mushroom substrate and recycled textile waste. Composite panels were produced with densities ranging from 685 to 907 kg/m³ through thermocompression. The manuscript details the production methodology and assesses the panel’s thermal performance, water absorption, and mechanical strength. The aim is to assess the viability of these alternative materials in producing composites that could serve as environmentally friendly substitutes for traditional wood-based products. Oil-free pomace is a promising and effective alternative to wood, suitable for dry environments. Composite panels composed of miscanthus or spent mushroom substrate and oil-free pomace met the EN 312 standards for general-purpose products in dry conditions, highlighting their potential for use in sustainable applications. Full article

Miscanthus × giganteus biomass plays a crucial role in producing renewable energy and bio-based products, supporting global sustainability objectives. However, its introduction into the European Union has made it susceptible to the ectoparasitic needle nematode Longidorus spp., which are known vectors of severe viral diseases. The aim of the presented research was to assess the effectiveness of the following soil amendments: vermicompost from Eisenia fetida and silver nanoparticles (Ag-NPs) applied to the soil with Miscanthus plants following artificial inoculation of Longidorus elongatus. A two-year experiment was conducted at the National Institute of Horticulture Research in Skierniewice using concrete rings filled with medium sandy soil amended with 10% peat. Treatments included: control (no amendments), vermicompost (4 L of E. fetida vermicompost), and Ag-NPs (60 mg/L soil). Each treatment was replicated four times. Application of both vermicompost and Ag-NPs positively influenced soil parameters and crop yield while suppressing nematode populations. Significant reductions in L. elongatus density were observed: vermicompost reduced nematode population by 80% and Ag-NPs by 90% compared to the control (15%). Full article