Search Results (587)

The COVID-19 pandemic has had profound impact, necessitating a deeper understanding of factors influencing virus transmission. The negative impacts have weakened the economy and changed billions of lives around the world. COVID-19 is a new virus, and a lot of studies have tried to investigate its effect on, for example, the economy or environment. This research reveals new approaches to recognizing and stopping the spread of this virus with its connection to weather conditions and relevant parameters. By analyzing how temperature and humidity affect COVID-19 spread, alongside evaluating the effectiveness of initial public policies, this study addresses the critical gap in research by investigating the interplay between climate conditions and government regulations during the early stages of the pandemic in South Korea. This dual approach provides a comprehensive framework for understanding how environmental and policy factors jointly influence pandemic dynamics, offering valuable lessons for future global health crises. Although it focuses only on the first phase of South Korea COVID-19 regulations, outcomes show that these regulations were notably effective against the COVID-19 pandemic. The outcomes prove that higher temperature and higher relative humidity lead to lower transmission. Hence, based on the results during winter, the number of infections would be expected to speed up again. Full article

This study presents a compact and stable gain spacecraft antenna that operates in all Global Navigation Satellite System (GNSS) bands from 1.164 GHz to 1.610 GHz. The proposed antenna structure based on the single-feed crossed bowtie antenna concept consists of four triangular patches excited with a 90° phase difference in between to generate right-hand circular polarization (RHCP), without needing complex feed networks. The radiator part of the antenna is covered by a radome and is also supported by a cylindrical dielectric cavity frame (DCF) to weaken the diffracted waves propagating along the ground plane while increasing vibration resistance. The fabricated antenna provides a return loss better than 10 dB with lower than 3 dB axial ratio and a stable gain around 7.2 ± 0.3 dBic over the entire GNSS bands, as well as a more compact and lightweight structural performance. It is also verified that the structural integrity and functional performance of the fabricated antenna remain consistent despite exposure to an equivalent vibration level in the launch process. The presented all-band spacecraft GNSS antenna is an innovative implementation with space industry insight for multi-band space applications that have application-specific limitations and provides consistent performance, as well as operational safety with the antenna design simplicity. Full article

Previous studies have highlighted the need for post-treatment of implants due to surface aging. This study investigated the effect of vacuum plasma (VP) treatment on the osseointegration of sandblasted, large grit, acid-etched (SLA) implant surfaces. The hypothesis was that VP might enhance implant stability, measured by implant stability quotient (ISQ) and histological osseointegration through bone-to-implant contact (BIC) and bone area ratio (BA) in rabbit models. Eighteen implants were either untreated or treated with VP and installed into the femurs of six rabbits, which were sacrificed after four weeks. Histological analyses of BIC and BA, along with micro-CT analysis of bone volume and ISQ, were performed. The VP-treated group showed higher levels of BA, bone volume, and ISQ, but no statistically significant differences were observed between the control and experimental groups. Despite limitations, both groups achieved better osseointegration and regeneration, warranting further studies on plasma treatment effects over varying implantation periods. Full article

Structural materials in fast reactors with harsh radiation environments due to high energy neutrons—compared to thermal reactors—potentially suffer from a higher degree of radiation damage. This radiation damage can change the thermophysical and mechanical properties of materials and, as a result, alter their performance and effective lifetime, in some cases leading to their disintegration. These phenomena can jeopardize the safety of fast reactors and thus need to be investigated. In this study, the effect of radiation damage on the vessels of molten salt fast reactors (MSFR) was evaluated based on two fundamental radiation damage parameters: displacement per atom (dpa) and primary knock-on atom (pka). Following the previous part of this article (Parts 1 and 2), an iMAGINE reactor core design (University of Liverpool, UK—chloride-based salt fuel system) and an EVOL reactor core design (CNRS, Grenoble, France, fluoride-based salt fuel system) with stainless steel and nickel-based alloy material vessels, respectively, were considered as case studies. The SPECTER and SPECTRA-PKA codes and a PTRAC card of MCNPX, integrated with a module which has been developed in MATLAB, named PTRIM and SRIM-2013 (using binary collision approximation), were employed individually to calculate and compare dpa and PKA (this master module containing all three tools has been appended to the iMAGINE-3BIC package for future use during reactor operations). Additionally, SRIM-2013 was applied in a 3D simulation of a radiation damage map on a small sample of vessels based on the calculated PKA. Our results showed a higher degree of radiation damage in the iMAGINE vessel compared to the EVOL one, which could be expected due to the harder neutron flux spectrum of the iMAGINE core compared to EVOL. In addition, the nickel alloy vessel showed better radiation damage resistance against high energy neutrons compared to the stainless steel one, although more investigations are required on thermal neutrons and alloy corrosion mechanisms to determine the best material for use in MSFR vessels. Full article

An air-filled substrate-integrated waveguide (AF-SIW) circularly polarized (CP) 1 × 8 mm wave antenna array is presented for fifth-generation (5G) applications. The presented slot antenna array consists of three layers of PCB and one layer of aluminum, which serve as the AF-SIW feeding network and the metal cavity radiation element, respectively. The CP characteristic is achieved by the use of an S-shaped aluminum radiation cavity on the top of the AF-SIW feeding network. The air-filled substrate-integrated waveguide technique is unitized to achieve high radiation efficiency. A wide input impedance bandwidth of 18.4% is obtained for the proposed antenna scheme, ranging from 34.5 GHz to 41.5 GHz, with a peak gain of 18 dBic. As for CP characteristic, the proposed antenna possesses a wide 3 dB axial ratio (AR) bandwidth, which is 16.4% (36.5 GHz to 43 GHz). The antenna scheme is fabricated and measured to verify the potential application as well as the promising performance. The measured results of the 1 × 8 antenna array shows that the wide AR as well as the input impedance are simultaneously achieved, which coincide well with the simulated results. Also, the measured results indicate that the proposed antenna scheme might be a good candidate for future mobile applications. Full article

Different types of macrophages (Mφ) are involved in atherogenesis, including inflammatory Mφ and foamy Mφ (FM). Our previous study demonstrated that two-photon excited fluorescence (TPEF) imaging of NADH and FAD autofluorescence (AF) could distinguish experimental models that mimic the different atherosclerotic Mφ types. The present study assessed whether optical differences correlated with phenotypic and functional differences, potentially guiding diagnostic and therapeutic strategies. Phenotypic differences were investigated using three-dimensional principal component analysis and multi-color flow cytometry. Functional analyses focused on cytokine production, metabolic profiles, and cellular oxidative stress, in LDL dose-dependent assays, to understand the origin of AF in the FAD spectrum and assess FM ability to transition toward an immunoregulatory phenotype and function. Phenotypic studies revealed that FM models generated with acetylated LDL (Mac) were closer to immunoregulatory Mφ, while those generated with oxidized LDL (Mox) more closely resembled inflammatory Mφ. The metabolic analysis confirmed that inflammatory Mφ primarily used glycolysis, while immunoregulatory Mφ mainly depended on mitochondrial respiration. FM models employed both pathways; however, FM models generated with high doses of modified LDL showed reduced mitochondrial respiration, particularly Mox FM. Thus, the high AF in the FAD spectrum in Mox was not linked to increased mitochondrial respiration, but correlated with the dose of oxidized LDL, leading to increased production of reactive oxygen species (ROS) and lysosomal ceroid accumulation. High FAD-like AF, ROS, and ceroid accumulation were reduced by incubation with α-tocopherol. The cytokine profiles supported the phenotypic analysis, indicating that Mox FM exhibited greater inflammatory activity than Mac FM, although both could be redirected toward immunoregulatory functions, albeit to different degrees. In conclusion, in the context of immunoregulatory therapies for atherosclerosis, it is crucial to consider FM, given their prevalence in plaques and our results, as potential targets, regardless of their inflammatory status, alongside non-foamy inflammatory Mφ. Full article

RNAs, especially non-coding RNAs (ncRNAs), are crucial players in regulating cellular mechanisms due to their ability to interact with and regulate other molecules. Altered expression patterns of ncRNAs have been observed in prostate cancer (PCa), contributing to the disease’s initiation, progression, and treatment response. This study aimed to evaluate the ability of a specific set of RNAs, including long ncRNAs (lncRNAs), microRNAs (miRNAs), and mRNAs, to discriminate between PCa and the non-neoplastic condition benign prostatic hyperplasia (BPH). After selecting by literature mining the most relevant RNAs differentially expressed in biofluids from PCa patients, we evaluated their discriminatory power in samples of unfiltered urine from 50 PCa and 50 BPH patients using both real-time PCR and droplet digital PCR (ddPCR). Additionally, we also optimized a protocol for urine sample manipulation and RNA extraction. This two-way validation study allowed us to establish that miRNAs (i.e., miR-27b-3p, miR-574-3p, miR-30a-5p, and miR-125b-5p) are more efficient biomarkers for PCa compared to long RNAs (mRNAs and lncRNAs) (e.g., PCA3, PCAT18, and KLK3), as their dysregulation was consistently reported in the whole urine of patients with PCa compared to those with BPH in a statistically significant manner regardless of the quantification methodology performed. Moreover, a significant increase in diagnostic performance was observed when molecular signatures composed of different miRNAs were considered. Hence, the abovementioned circulating ncRNAs represent excellent potential non-invasive biomarkers in urine capable of effectively distinguishing individuals with PCa from those with BPH, potentially reducing cancer overdiagnosis. Full article

Osseodensification enhances the stability of endosteal implants. However, pre-clinical studies utilizing osseodensification instrumentation do not account for the limited presence of trabeculae seen clinically. This study aimed to evaluate the effect of osseodensification instrumentation on osteotomy healing in scenarios with and without the presence of trabecular bone. A ~10 cm incision was made over the hip of twelve sheep. Trabecular bone was surgically removed from twelve sites (one site/animal; negative control (Neg. Ctrl)) and left intact at twelve sites (one site/animal; experimental group (Exp.)). All osteotomies were created using the osseodensification drilling protocol. Each osteotomy received an endosteal implant and was evaluated after 3 or 12 weeks of healing (n = 6 animals/time). Histology revealed increased woven and lamellar bone surrounding the implants in the Exp. group relative to the Neg. Ctrl group. The Exp. group demonstrated the presence of bone fragments, which acted as nucleating sites, thereby enhancing the bone formation and remodeling processes. Bone-to-implant contact (%BIC) and bone area fractional occupancy (%BAFO) were significantly higher in the Exp. group relative to the Neg. Ctrl group both at 3 weeks (p = 0.009 and p = 0.043) and 12 weeks (p = 0.010 and p = 0.008). Osseodensification instrumentation in the presence of trabecular bone significantly improved osseointegration. However, no negative influences such as necrosis, inflammation, microfractures, or dehiscence were observed in the absence/limited presence of trabeculae. Full article

One of the primary issues that arises in statistical modeling pertains to the assessment of the relative importance of each variable in the model. A variety of techniques have been proposed to quantify variable importance for regression models. However, in the context of best subset selection, fewer satisfactory methods are available. With this motivation, we here develop a variable importance measure expressly for this setting. We investigate and illustrate the properties of this measure, introduce algorithms for the efficient computation of its values, and propose a procedure for calculating p-values based on its sampling distributions. We present multiple simulation studies to examine the properties of the proposed methods, along with an application to demonstrate their practical utility. Full article

This study aimed to elucidate the genetic causes underlying the juvenile parkinsonism (JP) diagnosed in a girl with several family members diagnosed with spinocerebellar ataxia type 2 (SCA2). To achieve this, whole-exome sequencing, analysis of CAG repeats, RNA sequencing analysis on fibroblasts, and metabolite identification were performed. As a result, a homozygous missense mutation SNP T>C (rs2254562) in synaptojamin 1 (SYNJ1), which has been implicated in the regulation of membrane trafficking in the synaptic vesicles, was identified. Additionally, we observed overexpression of L1 cell adhesion molecule (L1CAM), Cdc37, GPX1, and GPX4 and lower expression of ceruloplasmin in the patient compared to the control. We also found changes in sphingolipid, inositol, and inositol phosphate metabolism. These findings help to clarify the mechanisms of JP and suggest that the etiology of JP in the patient may be multifactorial. This is the first report of the rs2254562 mutation in the SYNJ gene identified in a JP patient with seizures and cognitive impairment. Full article

The purpose of this study was to investigate the optimization of computer-aided design/computer-aided manufacturing (CAD/CAM) patient-specific implants for mandibular facial bone defects and compare the biocompatibility and osseointegration of machined titanium (Ma), Sandblasted/Large-grit/Acid-etched (SLA) titanium, and polyetherketoneketone (PEKK) facial implants. We hypothesized that the facial implants made of SLA titanium had superior osseointegration when applied to the gonial angle defect and prevented the senile atrophy of the bone. Histologic findings of the soft-tissue reaction, hard-tissue reaction, and bone–implant contact (BIC (%) of 24 Ma, SLA, and PEKK facial implants at 8 and 12 weeks were investigated. There was no statistical difference in the soft tissue reaction. Bone was formed below the periosteum in all facial implants at 12 weeks and the BIC values were significantly different at both 8 and 12 weeks (p < 0.05). Ma, SLA, and PEKK facial implants are biocompatible with osseointegration properties. SLA can enhance osseointegration and provoke minimal soft tissue reactions, making them the most suitable choice. They provide an excellent environment for bone regeneration and, over the long term, may prevent atrophy caused by an aging mandible. The bone formation between the lateral surface of the facial implant and periosteum may assist in osseointegration and stabilization. Full article

Previous studies have explored the factors influencing entrepreneurial intentions (EIs), primarily focusing on personality traits and various psychological aspects. This study, however, investigates external factors, such as entrepreneurship education programs (EEPs), cognitive motivational factors associated with the Theory of Planned Behavior (TPB), and the impact of business incubation centers (BICs), as moderators of EIs. The research involved 458 respondents from diverse higher education institutions in Asia. Our findings indicate that EEPs and BICs at universities positively and significantly affect students’ EIs. Additionally, the cognitive factors linked to TPB demonstrate a positive and significant direct effect on EIs while also acting as mediators between EEPs and EIs. These findings underscore the importance of adopting a multilevel perspective in designing and implementing EEPs and BICs to better comprehend the determinants of EIs. Our study provides valuable insights for university administrators, policymakers, and entrepreneurship instructors in developing countries to improve the university entrepreneurial ecosystem by creating cohesive programs and supportive institutions. Moreover, the results can serve as encouragement for individuals embarking on an entrepreneurial journey. Full article

Background: Limited evidence is available about sleep quality changes associated with the use of Cabotegravir (CAB), a new, long-acting (LA) antiretroviral (ARV) drug belonging to the class of Integrase Strand Transfer Inhibitors (INSTIs). Methods: Pittsburgh Sleep Quality Index (PSQI) was calculated in 53 people living with HIV (PLWH) under the care of the outpatient services of two Italian Infectious Diseases Centers in Apuliabefore (M0) and seven months after (M7) the switch to LA CAB. Global scores and relative subitems were compared using paired sample tests. The same analysis was repeated in subgroups of PLWH switching from INSTIs-, Dolutegravir-(DTG), and Bictegravir (BIC)-based regimens. Results: A significant reduction was reported in global mean (±StandardDeviation, SD) PSQI at M7 compared to M0 (4 (±3) vs. 3 (±2), p = 0.01), particularly in the areas of sleep latency and sleep disturbances. The improvement was also significant in PLWH already on INSTIs- (from median 3 to 2 points, p = 0.02) and DTG-based (from median 4 to 2, p = 0.01) ARV regimens, but not among those who switched from BIC-based regimens. Conclusions: PLWH reported improved sleep quality after switching from ARV treatment to LA CAB. Further studies are needed to give deeper insights into this phenomenon. Full article

We propose a photonic crystal (PC) nanostructure that combines bound states In the continuum (BIC) with a high-quality factor up to 10⁷ for emitting circularly polarized beams. We break the in-plane inversion symmetry of the unit cell by tilting the triangular hole of the hexagonal lattice, resulting in the conversion of a symmetrically protected BIC to a quasi-BIC. High-quality circularly polarized light is obtained efficiently by adjusting the tilt angles of the hole and the thickness of the PC layer. By changing the hole’s geometry in the unit cell, the Q-factor of circularly polarized light is further improved. The quality factor can be adjusted from 6.0 × 10³ to 1.7 × 10⁷ by deliberately changing the shape of the holes. Notably, the proposed nanostructure exhibits a large bandgap, which significantly facilitates the generation of stable single-mode resonance. The proposed structure is anticipated to have practical applications in the field of laser technology, particularly in the advancement of low-threshold PC surface emitting lasers (PCSELs). Full article

Bound states in the continuum (BICs), which are characterized by their high-quality factor, have become a focal point in modern optical research. This study investigates BICs within a periodic array of dielectric resonators, specifically composed of a silicon rectangular bar coupled with four silicon rectangular blocks. Through the analysis of mode coupling, we demonstrate that the interaction between the blocks significantly modulates the eigenmodes of the bar, causing a redshift in all modes and enabling the formation of electromagnetically induced transparency based on BICs (EIT-BIC). Unlike typical EIT mechanisms, this EIT-BIC arises from the coupling of “bright” and “dark” modes both from the rectangular bar, offering novel insights for nanophotonic and photonic device design. Further, our systematic exploration of BIC formation mechanisms and their sensing properties by breaking structural symmetries and changing environmental refractive indices has shed light on the underlying physics. This research not only consolidates a robust theoretical framework for understanding BIC behavior but also paves the way for high-quality factor resonator and sensor development, as well as the precise control of photonic states. The findings significantly deepen our understanding of these phenomena and hold substantial promise for future photonic applications. Full article