Three-section configuration
Five-section configuration
At 16-km/h (10-mph) working speeds, the 2330 Mulch Finisher can cover up to 27.5 ha (68 acres) per hour enabling producers to size their implements for their unique productivity and agronomic needs.
The 2330 is available in sizes ranging from 6.6 to 17.2 m (21 ft, 9 in. to 56 ft, 3 in.). Horsepower requirements range from 24.5 to 34.2 kW/m (10 to 14 hp-ft), depending on the soil, depth, and speed.
| Working width | Centerframe size | Productivity per hour at 16 km/h (10 mph) |
| 7.54 m (24 ft, 9 in.) | 13.14 m (10 ft, 3 in.) | 12.1 ha (30 acres) |
| 8.46 m (27 ft, 9 in.) | 13.8 ha (34 acres) | |
| 9.37 m (30 ft, 9 in.) | 15ha (37 acres) | |
| 10.29 m (33 ft, 9 in.) | 15 ha (37 acres) |
| Working width | Centerframe size | Productivity per hour at 16 km/h (10 mph) |
| 11.66 m (38 ft, 3 in.) | 13.14 m (10 ft, 3 in.) | 18.6 ha (46 acres) |
| 13.49 m (44 ft, 3 in.) | 21.9 ha (54 acres) | |
| 15.32 m (50 ft, 3 in.) | 24.7 ha (61 acres) | |
| 17.15 m (56 ft, 3 in.) | 27.5 ha (68 acres) |
NOTE: Specification and design subject to change without notice.
T-hitch with Level-Lift turnbuckle
Level-Lift turnbuckle
The Level-Lift hitch ensures a level operation through all operating depths. It also provides consistent gang and sweep depth fore to aft for thorough seedbed preparation. This quick, easy adjustment ensures a flat seedbed floor and level soil profile for planting.
The combination of the disk gang, sweep, and harrow functions promotes consistent and uniform chemical placement and mixing. The T-hitch enables easy turnbuckle adjustment for fast tractor changeover and quick implement leveling fore to aft.
The heavy-duty T-hitch allows for tighter turning, decreasing the number of headlands required for quick turns on the end. The T-hitch also houses the hoses and wiring harness, protecting them from crop and incidental tire contact.
Low-concavity disk blades
Disks engaged on 2330
The producer can work ground faster with the 508-mm x 5-mm (20-in. x 0.197-in.) low-concavity disk blades and outside blades tapered to 457 mm (18 in.) on the 2330 Mulch Finisher"
Blades are spaced 184-mm (7.25-in.) apart and are fixed at an 8-degree gang angle:
C-spring cushion gangs help protect against rocks and other obstructions in the field. Dura-Flex™ (3+1) bearings are standard equipment:
All disk gangs feature combination rigid/self-adjusting scrapers as standard equipment:
Engaged disk gangs add to the stability of the implement at higher ground speeds for consistent working depth in uneven ground.
229-mm (9-in.) spacing
Thanks to an updated frame design that enables true 229-mm (9-in.) split-the-middle shank spacing, the 2330 Mulch Finishers can maintain consistent depth and evenly cover the field to achieve an optimal seedbed while flowing residue and managing weeds.
Even at high speeds and in tough field conditions, the TruPosition™ C-shanks with 91 kg (200 lb) of trip force minimize side-to-side movement and provide the operator better control of the soil profile for improved leveling capabilities.
These shanks provide a full tillage cut across the entire width of the implement. The shanks stay firmly planted in tough soils without quickly relieving. As a result, the soil is mixed completely and streaks are reduced. This helps producers maximize their productivity and create flat seedbeds for smooth planter operation and consistent seed depth.
The even 229-mm (9-in.) split-the-middle shank spacing enables the 2330 Mulch Finisher to minimize the potential of remaining strips of weeds that survive the tillage pass. With a mulch finisher pass just prior to planting/seeding, the crop can emerge into a weed-free field that gives it the best chance to reach canopy ahead of the weeds.
If some weeds emerge and a post-emergence herbicide is needed, weeds should be smaller and easier to control. As a result, the mulch finisher pass helps keep weed management costs under control and helps preserve crop yield potential.
TruPosition standards
TruPosition standard components
Producers are working ground at faster speeds and in tighter soil conditions, requiring more from standards and frames.
The 91-kg (200-lb) trip TruPosition standards include:
These standards provide 91 kg (200 lb) of trip force and enable producers to maintain a consistent sweep depth. A combination of spring pressure and pivot casting geometry minimizes side-to-side movement and provides the ultimate in soil profile and seedbed.
Bolt-on and knock-on sweep options are available to customize the 2330 Mulch Finisher to perform well in a variety of field conditions.
| Bolt-on sweeps | Knock-on sweeps |
| Tru-Width™ sweeps | Perma-Loc™ sweeps |
| High-productivity sweeps | High-productivity Perma-Loc sweeps |
The John Deere high-productivity sweep options are recommended for the high-working-speed market and perform best at speeds of 11-16 km/h (7-10 mph). With a low profile and curved wing shape, the high-productivity sweeps provide low draft and consistent penetration while easily getting through tough and heavy residue. Compared to Tru-Width sweeps, high-productivity sweeps are designed to exert less draft and retain their shape for longer wear life so producers can stay productive in the field longer.
The high-productivity sweeps for the John Deere 2330 Mulch Finisher come in a 254-mm (10-in.) width, both in the bolt-on and the knock-on Perma-Loc version. They fit all 47-degree standards with 44-mm (1.75-in.) hole spacing and 11 mm (0.4375 in.) that currently take Tru-Width sweeps, both John Deere and other makes.
Tru-Width sweep
High-productivity sweep
254-mm (10-in.) Tru-Width sweeps are optional on mulch finishers with 229-mm (9-in.) shank spacing.
The Tru-Width design offers the following benefits:
Perma-Loc sweep
High-productivity Perma-Loc sweep
Perma-Loc utilizes a self-tightening ratcheting system for easy installation. Indentations formed in the sweep stem provide the spring clip with a locking surface. The adapter edge, sweep, and spring all act together to tightly lock the sweep to the shank. The operator simply pushes the sweep on by hand to the first notch (audible click). As the resistance is increased (ground engagement), the sweep progressively wedges tighter. The mounting design minimizes lost sweeps and wear on adapter.
Utilizing the removal tool to depress the spring through the stem access opening and a tap with a hammer easily releases the sweep from the adapter and spring.
Perma-Loc sweeps have the advantage of using a Tru-Width design for penetration, residue flow, and long life. The proven 47-degree sweep angle minimizes soil slabbing yet promotes soil movement. The narrow stem enhances excellent soil and residue flow. Stem geometry ensures soil flow over the spring access opening, effectively separating and lifting flow to a point higher on the shank. The force of soil flow is reduced on the shank, improving shank life.
The Perma-Loc system is standard equipment and consists of the following:
Tru-Width sweeps with the Perma-Loc adapter can seamlessly move the high-productivity sweeps.
The high-productivity sweeps use the current Perma-Loc adapter for 47-degree curved standard, N237614.
Depending on agronomic needs, producers have a choice of six rear harrow options included in the ProFinish Leveling System on the 2330 Mulch Finisher.
| Capabilities | Five-bar coil-tine harrow |
Six-bar spike-tooth harrow |
Three-bar coil-tine with round-bar basket |
Three-bar coil-tine with flat-bar basket |
Four-bar spike-tooth with round-bar basket |
Four-bar spike-tooth with flat-bar basket |
| Level seedbed | Good | Better | Best | Best | Best | Best |
| Firm seedbed | Fair | Good | Best | Better | Best | Better |
| Handle residue | Best | Better | Best | Best | Better | Better |
| Break up clods | Good | Better | Better | Best | Better | Best |
| Handle moisture/wet soil | Best | Better | Good | Good | Good | Good |
| Handle rocks | Best | Good | Better | Good | Better | Good |
With short windows of time to perform tillage operations, TruSet provides significant productivity improvements as operators can adjust the tool with just the push of a button, maximizing acres covered per day. By responding to conditions as they change throughout the field, TruSet Active enables operators to generate a higher-quality tillage performance within the first pass.
Using a GreenStar™ display, an operator sees real-time data for a variety of feature settings, ensuring confidence in desired tillage outcomes. Four customizable presets enable operators to save and name different combinations of settings for their most common field conditions, which allows for even quicker implement adjustments.
TruSet allows for adjustments from the cab
TruSet Tillage system
Single-point depth control is included with the TruSet Tillage system, giving operators the choice of automated or manual adjustments. Hydraulic routings on the tool are designed to allow each implement to feature both TruSet and standard single-point depth control for system redundancy, operator preference, and flexibility at resale.
John Deere has expanded TruSet features to bring even more functionality into the cab:
TruSet Tillage features a variety of technology features and packages. With either the Select or Premium package, you can elevate your experience with some or full control of your tillage tool from the cab at your fingertips. The following table outlines each TruSet offering specific to the implement model. For additional information on each feature, see the details after the table.
| TruSet Functions | ||||||||
| Models: | Set-point depth | Active depth | Basket pressure | Side-to-side leveling | Gang angle | Fore-aft | Wing down pressure | Stabilizer wheels |
| 2230 Floating Hitch Field Cultivator | --- | Select** | Select | Premium | --- | --- | --- | --- |
| 2230 Level-Lift™ Field Cultivator | --- | Select** | Select | --- | --- | --- | --- | --- |
| 2330 Mulch Finisher | --- | Select** | Select | Premium** | --- | Premium** | --- | --- |
| 2630 Series Disks | --- | Select** | Select | Premium | --- | Premium** | --- | Option |
| 2633VT Vertical Tillage | --- | Select** | Select | Premium | --- | Premium** | --- | --- |
| 2660VT Vertical Tillage 1-Section 4.27 m (14 ft) | --- | Select** | Select | Premium | Premium | Premium | --- | --- |
| 2660VT Vertical Tillage 3-Section 7.8, 9.2, 10.1 m (25.5, 30.3, 31.10 ft) | --- | Select** | Select | Premium | Premium | Premium | Premium | Option |
| 2660VT Vertical Tillage 5-Section 14.1, 15.1 m (43.6, 49.6 ft) | --- | Select** | Select | --- | Premium | Premium | --- | Option |
| 2680H High-Speed Disk* | In base | --- | --- | --- | --- | --- | --- | --- |
| 2430C | --- | Select** | --- | Premium | --- | --- | --- | --- |
| 2430 Drawn Chisel Plow | --- | Select** | Select | Premium | --- | --- | --- | --- |
*Currently not available in feature packaging
**New feature
NOTE: All Select package features are also included in the Premium package.
Active depth (Select and Premium package)
Adjust depth and pressure while in the field
Basket pressure and raise (Select and Premium package)
Side-to-side leveling (Premium package)
Individual section leveling with TruSet side-to-side
Gang angle (Premium package)
Gang angle adjustment
Fore-aft (Premium package)
Hydraulic fore-aft control levels the 2660VT
Wing down pressure (Premium package)
With integrated TruSet Tillage technology, operators can incorporate documentation and prescription functionality into their tillage operations. The tillage documentation feature allows producers to capture and analyze the tillage pass for additional coverage of the crop production cycle. Prescription functionality provides producers the capability to ensure their tillage operations are executed correctly, optimizing their investment in preparing for the next crop.
Operators can document data for the depth of their tillage tool along with rolling basket down pressure. By creating an as-applied map based off global positioning system (GPS) data for the job performed by each functional area on the implement, TruSet enables producers to document their tillage passes then later review and analyze the data for future agronomic decisions.
Additionally, the TELUS Agronomy Prescription Creator company, a connected partner tool through the John Deere Operations Center, enables producers to create prescriptions for each functional area on the tillage tools. Data from previous yields, soil surveys, or freehand drawing tools can be used to create prescriptions that command the implement to the desired depth and pressure settings for optimum agronomic results.
TELUS Agronomy Prescription Creator is a trademark of TELUS Agriculture and Consumer Goods
Hydraulic wing control pressure
NOTE: TruSet hydraulic wing control pressure is only offered on three-section models.
Stabilizer wheels (additional factory option)
NOTE: Stabilizer wheels are not offered on one-section models.
Rear hitch
A substantial rear hitch is available to give the 2330 the versatility to pull other tow-behind attachments. The rear hitch includes:
The rear hitch is fully compatible with all 2330 rear harrow configurations.
| Specs & Compare | ||||
|---|---|---|---|---|
| Select up to 4 models to compare specifications | John Deere 2330 Mulch Finisher |
| Working widths - 3-section | Option 1: 6.63 m 21.75 ft Option 2: 7.54 m 24.75 ft Option 3: 8.46 m 27.75 ft Option 4: 9.37 m 30.75 ft Option 5: 10.29 m 33.75 ft |
|||
|---|---|---|---|---|
| 5-section | Option 1: 11.81 m 38.75 ft Option 2: 13.49 m 44.25 ft Option 3: 15.32 m 50.25 ft Option 4: 17.15 m 56.25 ft |
|||
| Transport width (without rear harrow) - 3-section | Option 1: 4.32 m 14.17 ft Option 2: 4.27 m 14 ft Option 3: 4.44 m 14.58 ft Option 4: 4.5 m 14.75 ft Option 5: 4.72 m 14.5 ft |
|||
| 5-section | Option 1: 4.67 m 15.33 ft Option 2: 4.72 m 15.5 ft Option 3: 4.72 m Option 4: 4.72 m |
|||
| Transport height (without rear harrow) - 3-section | Option 1: 3.12 m 10.25 ft Option 2: 3.76 m 12.33 ft Option 3: 4.04 m 13.25 ft Option 4: 4.62 m 15.17 ft Option 5: 5.08 m 16.67 ft |
|||
| 5-section | Option 1: 3.58 m 11.75 ft Option 2: 3.91 m 12.83 ft Option 3: 4.5 m 14.75 ft Option 4: 4.87 m 16 ft |
|||
| Operating depth - Inches | Maximum: 15.2 cm 6 in. |
|||
| Miles per hour | 9.7 to 16 km/h 6 to 10 mph |
|||
| Horsepower per foot | 24.5 to 34.2 kW/m 10 to 14 hp/ft |
|||
| Standard spacings - Inches | Split-the-middle - 22.9 cm 9 in. |
| Type | Flex - 3-section or 5-section |
|---|
| Rigid frame | ||||
|---|---|---|---|---|
| 2-section | ||||
| 3-section | Option 1: 6.63 m 21.75 ft Option 2: 7.54 m 24.75 ft Option 3: 8.46 m 27.75 ft Option 4: 9.37 m 30.75 ft Option 5: 10.29 m 33.75 ft |
|||
| 5-section | Option 1: 11.81 m 38.75 ft Option 2: 13.49 m 44.25 ft Option 3: 15.32 m 50.25 ft Option 4: 17.15 m 56.25 ft |
| Rigid frame | ||||
|---|---|---|---|---|
| 2-section | ||||
| 3-section | Option 1: 4.32 m 14.17 ft Option 2: 4.27 m 14 ft Option 3: 4.44 m 14.58 ft Option 4: 4.5 m 14.75 ft Option 5: 4.72 m 14.5 ft, in. |
|||
| 5-section | Option 1: 4.67 m 15.33 ft Option 2: 4.72 m 15.5 ft Option 3: 4.72 m Option 4: 4.72 m |
| 2-section | ||||
|---|---|---|---|---|
| 3-section | Option 1: 3.12 m 10.25 ft Option 2: 3.76 m 12.33 ft Option 3: 4.04 m 13.25 ft Option 4: 4.62 m 15.17 ft Option 5: 5.08 m 16.67 ft |
|||
| 5-section | Option 1: 3.58 m 11.75 ft Option 2: 3.91 m 12.83 ft Option 3: 4.5 m 14.75 ft Option 4: 4.87 m 16 ft |
| Inches | Maximum: 15.2 cm 6 in. |
|---|
| Miles per hour | 9.7 to 16 km/h 6 to 10 mph |
|---|
| Horsepower per foot | 24.5 to 34.2 kW/m 10 to 14 hp/ft |
|---|
| Standard | ||||
|---|---|---|---|---|
| Options |
| Standard | Three selective-control valves (SCVs) required, hydraulic transport lockup | |||
|---|---|---|---|---|
| Options |
| Standard | 9-pin connector for warning lights, 12-volt required for 5-section models | |||
|---|---|---|---|---|
| Options |
| Type |
|---|
| Tubing | Centerframe - 3 m 10 ft, in. Rank tubes - 10.2x10.2 cm 4x4 in. Mainframe fore-aft tubes - 7.6x20.3 cm 3x8 in. Wing fore-aft tubes - 7.62x15.2 cm 3x6 in. |
|||
|---|---|---|---|---|
| Number of ranks | Five | |||
| Fore-and-aft | 340.4 cm 134 in. |
|||
| Underframe clearance | 61 cm 24 in. |
| Inches | Split-the-middle - 22.9 cm 9 in. |
|---|
| Option 1 | ||||
|---|---|---|---|---|
| Option 2 | ||||
| Option 3 |
| Depth adjustment | Base equipment TruSet in-cab depth/pressure control and single-point depth control |
|||
|---|---|---|---|---|
| Maximum depth | Even with sweep: 12.7 cm 5 in. |
|||
| Vertical adjustment | From even with the sweeps to 20.3 cm 8 in. |
|||
| Gang angle, degrees | 8 degree (angle) | |||
| Blade size | 50.8x0.5 cm 20x0.197 in. |
|||
| Blade spacing | 18.42 cm 7.25 in. |
|||
| Blade concavity | Low | |||
| Type of scrapers | Combination | |||
| Type of spool | Steel fabricated | |||
| Gang shaft diameter | 28.6 mm 1.125 in. |
|||
| Bearings |
| Options |
|---|
| Options |
|---|
| Type | Centerframe tires on Walk-Over tandem wheels Bias-ply tire options available |
|||
|---|---|---|---|---|
| Options | ||||
| 3-section | Option 1: (four) IF280/70 R15 134D tires Option 2: (four) IF320/70 R15 144D tires Option 3: (four) IF320/70 R15 144D tires Option 4: (four) IF320/70 R15 144D tires Option 5: (four) IF320/70 R15 144D tires |
|||
| 5-section | Option 1: (four) VF285/70 R19.5 150D tires Option 2: (four) VF285/70 R19.5 150D tires Option 3: (four) 440/65 R18 159A8/B tires Option 4: (four) 440/65 R18 159A8/B tires |
| Type | ||||
|---|---|---|---|---|
| Options | ||||
| 3-section | Option 1: (four) 11L-15 FI LR D tires Option 2: (four) 12.5-L-15 FI LR D tires Option 3: (four) 12.5-L-15 FI LR D tires Option 4: (four) 12.5-L-15 FI LR D tires Option 5: (four) 12.5-L-15 FI LR D tires |
|||
| 5-section | Option 1: (eight) 12.5-L-15 FI LR D tires Option 2: (eight) 12.5-L-15 FI LR D tires Option 3: (eight) 12.5-L-15 FI LR D tires Option 4: (eight) 12.5-L-15 FI LR D tires |
| Type | Mechanical stabilizer wheels and tires available for only 5-section Radial tire option available |
|||
|---|---|---|---|---|
| Options | Castering with 9.5L-15 tires (right- and left-hand sides) |
| Type | Active-hydraulic castering wheels and tires available for 3- and 5-section Radial tire option available |
|||
|---|---|---|---|---|
| Options | 9.5L-15 FI LR D tires (two) |
| Spike tooth harrow option 1 | Rank spacing 30.5 cm 12 in. Spike spacing 26.67 cm 10.5 in. Effective spacing 4.45 cm 1.75 in. Spike dimension 1.9x1.9x30.5 cm 0.75x0.75x12 in. Angle 15 to 45 degree (angle) Adjustable 6-bar spike-tooth |
|||
|---|---|---|---|---|
| Spike tooth harrow option 2 | ||||
| Spike tooth harrow option 3 | ||||
| Coil tine harrow option 1 | Rank spacing 38.1 cm 15 in. Tine spacing 31.75 cm 12.5 in. Effective spacing 63.5 mm 2.5 in. Tine dimensions 40.6 cm 16 in. Angle 15 to 60 degree (angle) Adjustments Depth, pitch, and angle Adjustable 5-bar coil-tine |
|||
| Coil tine harrow option 2 | ||||
| Rolling basket harrow option 1 | Spike/tine 30.5 cm 12 in. Rank spacing 30.5 cm 12 in. Spike/tine spacing 26.67 cm 10.5 in. Effective spacing 8.89 cm 3.5 in. Spike/tine dimensions 1.9x1.9x30.5 cm 0.75x0.75x12 in. Basket diameter 35.56 cm 14 in. Bearings Dura-Flex, diameter of: 7.62 cm 3 in. Self-aligning and greasable Adjustments Angle and aggressiveness 4-bar spike with single flat-bar rolling basket |
|||
| Rolling basket harrow option 2 | Spike/tine 30.5 cm 12 in. Rank spacing 30.5 cm 12 in. Spike/tine spacing 26.67 cm 10.5 in. Effective spacing 8.89 cm 3.5 in. Spike/tine dimensions 1.9x1.9x30.5 cm 0.75x0.75x12 in. Basket diameter 35.6 cm 14 in. Bearings Dura-Flex, diameter of 7.62 cm 3 in. Self-aligning, greasable Adjustments Angle and aggressiveness 4-bar spike with single, round-bar rolling basket |
|||
| Rolling basket harrow option 3 | Spike/tine Tine: 40.6 cm 16 in. Rank spacing 38.1 cm 15 in. Spike/tine spacing 22.9 cm 9 in. Effective spacing 7.62 cm 3 in. Spike/tine dimensions 40.6 cm 16 in. Basket diameter 35.6 cm 14 in. Bearings Dura-Flex, diameter: 7.62 cm 3 in. Self-aligning, greasable Adjustments Angle and aggressiveness 3-bar coil with flat-bar rolling basket |
|||
| Rolling basket harrow option 4 | Spike/tine Tine: 40.6 cm 16 in. Rank spacing 38.1 cm 15 in. Spike/tine spacing 22.9 cm 9 in. Effective spacing 7.62 cm 3 in. Spike/tine dimensions 40.6 cm 16 in. Basket diameter 35.6 cm 14 in. Bearings Dura-Flex, diameter: 7.62 cm 3 in. Self-aligning, greasable Adjustments Angle and aggressiveness 3-bar coil with round-bar rolling basket |
| Tubing size | ||||
|---|---|---|---|---|
| Telescoping | Yes | |||
| Tongue weight rating | 680 kg 1,500 lb |
|||
| GVW | ||||
| Wiring harness for transport lights | Yes | |||
| Hydraulic hoses and couplers | One set |
| Description |
|---|
| Options |
|---|
| Date collected | 25-January-2018 |
|---|
