Skip to content

Latest commit

 

History

History
345 lines (251 loc) · 14 KB

layer.md

File metadata and controls

345 lines (251 loc) · 14 KB

Image Layer Filesystem Changeset

This document describes how to serialize a filesystem and filesystem changes like removed files into a blob called a layer. One or more layers are applied on top of each other to create a complete filesystem. This document will use a concrete example to illustrate how to create and consume these filesystem layers.

This section defines the application/vnd.oci.image.layer.v1.tar, application/vnd.oci.image.layer.v1.tar+gzip, application/vnd.oci.image.layer.v1.tar+zstd, application/vnd.oci.image.layer.nondistributable.v1.tar, application/vnd.oci.image.layer.nondistributable.v1.tar+gzip, and application/vnd.oci.image.layer.nondistributable.v1.tar+zstd media types.

+gzip Media Types

  • The media type application/vnd.oci.image.layer.v1.tar+gzip represents an application/vnd.oci.image.layer.v1.tar payload which has been compressed with gzip.
  • The media type application/vnd.oci.image.layer.nondistributable.v1.tar+gzip represents an application/vnd.oci.image.layer.nondistributable.v1.tar payload (deprecation notice) which has been compressed with gzip.

+zstd Media Types

  • The media type application/vnd.oci.image.layer.v1.tar+zstd represents an application/vnd.oci.image.layer.v1.tar payload which has been compressed with zstd.
  • The media type application/vnd.oci.image.layer.nondistributable.v1.tar+zstd represents an application/vnd.oci.image.layer.nondistributable.v1.tar payload (deprecation notice) which has been compressed with zstd.

Distributable Format

  • Layer Changesets for the media type application/vnd.oci.image.layer.v1.tar MUST be packaged in tar archive.
  • Layer Changesets for the media type application/vnd.oci.image.layer.v1.tar MUST NOT include duplicate entries for file paths in the resulting tar archive.

Change Types

Types of changes that can occur in a changeset are:

  • Additions
  • Modifications
  • Removals

Additions and Modifications are represented the same in the changeset tar archive.

Removals are represented using "whiteout" file entries (See Representing Changes).

File Types

Throughout this document section, the use of word "files" or "entries" includes the following, where supported:

  • regular files
  • directories
  • sockets
  • symbolic links
  • block devices
  • character devices
  • FIFOs

File Attributes

Where supported, MUST include file attributes for Additions and Modifications include:

  • Modification Time (mtime)
  • User ID (uid)
    • User Name (uname) secondary to uid
  • Group ID (gid)
    • Group Name (gname) secondary to gid
  • Mode (mode)
  • Extended Attributes (xattrs)
  • Symlink reference (linkname + symbolic link type)
  • Hardlink reference (linkname)

Sparse files SHOULD NOT be used because they lack consistent support across tar implementations.

Hardlinks

  • Hardlinks are a POSIX concept for having one or more directory entries for the same file on the same device.
  • Not all filesystems support hardlinks (e.g. FAT).
  • Hardlinks are possible with all file types except directories.
  • Non-directory files are considered "hardlinked" when their link count is greater than 1.
  • Hardlinked files are on a same device (i.e. comparing Major:Minor pair) and have the same inode.
  • The corresponding files that share the link with the > 1 linkcount may be outside the directory that the changeset is being produced from, in which case the linkname is not recorded in the changeset.
  • Hardlinks are stored in a tar archive with type of a 1 char, per the GNU Basic Tar Format and libarchive tar(5).
  • While approaches to deriving new or changed hardlinks may vary, a possible approach is:
SET LinkMap to map[< Major:Minor String >]map[< inode integer >]< path string >
SET LinkNames to map[< src path string >]< dest path string >
FOR each path in root path
  IF path type is directory
    CONTINUE
  ENDIF
  SET filestat to stat(path)
  IF filestat num of links == 1
    CONTINUE
  ENDIF
  IF LinkMap[filestat device][filestat inode] is not empty
    SET LinkNames[path] to LinkMap[filestat device][filestat inode]
  ELSE
    SET LinkMap[filestat device][filestat inode] to path
  ENDIF
END FOR

With this approach, the link map and links names of a directory could be compared against that of another directory to derive additions and changes to hardlinks.

Platform-specific attributes

Implementations on Windows MUST support these additional attributes, encoded in PAX vendor extensions as follows:

  • Windows file attributes (MSWINDOWS.fileattr)
  • Security descriptor (MSWINDOWS.rawsd): base64-encoded self-relative binary security descriptor
  • Mount points (MSWINDOWS.mountpoint): if present on a directory symbolic link, then the link should be created as a directory junction
  • Creation time (LIBARCHIVE.creationtime)

Creating

Initial Root Filesystem

The initial root filesystem is the base or parent layer.

For this example, an image root filesystem has an initial state as an empty directory. The name of the directory is not relevant to the layer itself, only for the purpose of producing comparisons.

Here is an initial empty directory structure for a changeset, with a unique directory name rootfs-c9d-v1.

rootfs-c9d-v1/

Populate Initial Filesystem

Files and directories are then created:

rootfs-c9d-v1/
  etc/
    my-app-config
  bin/
    my-app-binary
    my-app-tools

The rootfs-c9d-v1 directory is then created as a plain tar archive with relative path to rootfs-c9d-v1. Entries for the following files:

./
./etc/
./etc/my-app-config
./bin/
./bin/my-app-binary
./bin/my-app-tools

Populate a Comparison Filesystem

Create a new directory and initialize it with a copy or snapshot of the prior root filesystem. Example commands that can preserve file attributes to make this copy are:

  • cp(1): cp -a rootfs-c9d-v1/ rootfs-c9d-v1.s1/
  • rsync(1): rsync -aHAX rootfs-c9d-v1/ rootfs-c9d-v1.s1/
  • tar(1): mkdir rootfs-c9d-v1.s1 && tar --acls --xattrs -C rootfs-c9d-v1/ -c . | tar -C rootfs-c9d-v1.s1/ --acls --xattrs -x (including --selinux where supported)

Any changes to the snapshot MUST NOT change or affect the directory it was copied from.

For example rootfs-c9d-v1.s1 is an identical snapshot of rootfs-c9d-v1. In this way rootfs-c9d-v1.s1 is prepared for updates and alterations.

Implementor's Note: a copy-on-write or union filesystem can efficiently make directory snapshots

Initial layout of the snapshot:

rootfs-c9d-v1.s1/
  etc/
    my-app-config
  bin/
    my-app-binary
    my-app-tools

See Change Types for more details on changes.

For example, add a directory at /etc/my-app.d containing a default config file, removing the existing config file. Also a change (in attribute or file content) to ./bin/my-app-tools binary to handle the config layout change.

Following these changes, the representation of the rootfs-c9d-v1.s1 directory:

rootfs-c9d-v1.s1/
  etc/
    my-app.d/
      default.cfg
  bin/
    my-app-binary
    my-app-tools

Determining Changes

When two directories are compared, the relative root is the top-level directory. The directories are compared, looking for files that have been added, modified, or removed.

For this example, rootfs-c9d-v1/ and rootfs-c9d-v1.s1/ are recursively compared, each as relative root path.

The following changeset is found:

Added:      /etc/my-app.d/
Added:      /etc/my-app.d/default.cfg
Modified:   /bin/my-app-tools
Deleted:    /etc/my-app-config

This reflects the removal of /etc/my-app-config and creation of a file and directory at /etc/my-app.d/default.cfg. /bin/my-app-tools has also been replaced with an updated version.

Representing Changes

A tar archive is then created which contains only this changeset:

  • Added and modified files and directories in their entirety
  • Deleted files or directories marked with a whiteout file

The resulting tar archive for rootfs-c9d-v1.s1 has the following entries:

./etc/my-app.d/
./etc/my-app.d/default.cfg
./bin/my-app-tools
./etc/.wh.my-app-config

To signify that the resource ./etc/my-app-config MUST be removed when the changeset is applied, the basename of the entry is prefixed with .wh..

Applying Changesets

  • Layer Changesets of media type application/vnd.oci.image.layer.v1.tar are applied, rather than simply extracted as tar archives.
  • Applying a layer changeset requires special consideration for the whiteout files.
  • In the absence of any whiteout files in a layer changeset, the archive is extracted like a regular tar archive.

Changeset over existing files

This section specifies applying an entry from a layer changeset if the target path already exists.

If the entry and the existing path are both directories, then the existing path's attributes MUST be replaced by those of the entry in the changeset. In all other cases, the implementation MUST do the semantic equivalent of the following:

  • removing the file path (e.g. unlink(2) on Linux systems)
  • recreating the file path, based on the contents and attributes of the changeset entry

Whiteouts

  • A whiteout file is an empty file with a special filename that signifies a path should be deleted.
  • A whiteout filename consists of the prefix .wh. plus the basename of the path to be deleted.
  • As files prefixed with .wh. are special whiteout markers, it is not possible to create a filesystem which has a file or directory with a name beginning with .wh..
  • Once a whiteout is applied, the whiteout itself MUST also be hidden.
  • Whiteout files MUST only apply to resources in lower/parent layers.
  • Files that are present in the same layer as a whiteout file can only be hidden by whiteout files in subsequent layers.

The following is a base layer with several resources:

a/
a/b/
a/b/c/
a/b/c/bar

When the next layer is created, the original a/b directory is deleted and recreated with a/b/c/foo:

a/
a/.wh..wh..opq
a/b/
a/b/c/
a/b/c/foo

When processing the second layer, a/.wh..wh..opq is applied first, before creating the new version of a/b, regardless of the ordering in which the whiteout file was encountered. For example, the following layer is equivalent to the layer above:

a/
a/b/
a/b/c/
a/b/c/foo
a/.wh..wh..opq

Implementations SHOULD generate layers such that the whiteout files appear before sibling directory entries.

Opaque Whiteout

  • In addition to expressing that a single entry should be removed from a lower layer, layers may remove all of the children using an opaque whiteout entry.
  • An opaque whiteout entry is a file with the name .wh..wh..opq indicating that all siblings are hidden in the lower layer.

Let's take the following base layer as an example:

etc/
  my-app-config
bin/
  my-app-binary
  my-app-tools
  tools/
    my-app-tool-one

If all children of bin/ are removed, the next layer would have the following:

bin/
  .wh..wh..opq

This is called opaque whiteout format. An opaque whiteout file hides all children of the bin/ including sub-directories and all descendants. Using explicit whiteout files, this would be equivalent to the following:

bin/
  .wh.my-app-binary
  .wh.my-app-tools
  .wh.tools

In this case, a unique whiteout file is generated for each entry. If there were more children of bin/ in the base layer, there would be an entry for each. Note that this opaque file will apply to all children, including sub-directories, other resources and all descendants.

Implementations SHOULD generate layers using explicit whiteout files, but MUST accept both.

Any given image is likely to be composed of several of these Image Filesystem Changeset tar archives.

Non-Distributable Layers

NOTE: Non-distributable layers are deprecated, and not recommended for future use. Implementations SHOULD NOT produce new non-distributable layers. Implementations are expected to support preexisting images with non-distributable layers.

Due to legal requirements, certain layers may not be regularly distributable. Such "non-distributable" layers are typically downloaded directly from a distributor but never uploaded.

Non-distributable layers SHOULD be tagged with an alternative mediatype of application/vnd.oci.image.layer.nondistributable.v1.tar, application/vnd.oci.image.layer.nondistributable.v1.tar+gzip, or application/vnd.oci.image.layer.nondistributable.v1.tar+zstd. Implementations SHOULD NOT upload layers tagged with this media type; however, such a media type SHOULD NOT affect whether an implementation downloads the layer.

Descriptors referencing non-distributable layers MAY include urls for downloading these layers directly; however, the presence of the urls field SHOULD NOT be used to determine whether or not a layer is non-distributable.