GM Family 1 engine
This article needs additional citations for verification. (August 2014) |
Family 1 | |
---|---|
![]() The initial version (13S) of the Family I engine fitted to a 1980 Opel Kadett D | |
Overview | |
Manufacturer | General Motors |
Also called |
|
Production | 1979–present[1] |
Layout | |
Configuration | |
Cylinder block material | Cast iron |
Cylinder head material | Aluminium |
Combustion | |
Fuel type | |
Oil system | Wet sump |
Cooling system | Water-cooled |
Chronology | |
Predecessor | Vauxhall OHV Opel OHV Opel CIH |
Successor |
|
The GM Family I is a straight-four piston engine that was developed by Opel, a former subsidiary of General Motors and now a subsidiary of PSA Group, to replace the Vauxhall OHV, Opel OHV and the smaller capacity Opel CIH engines for use on small to mid-range cars from Opel/Vauxhall. The engine first appeared in the Opel Kadett D in 1979, and shortly afterwards in its Vauxhall badged sister – the Vauxhall Astra Mk.1 in 1980. Despite this, the previous Opel OHV engine continued to be sold in entry level versions of the Opel Kadett/Astra and Corsa throughout the 1980s.
The Family I is informally known as the "small block", since it shares its basic design and architecture with the larger Family II unit (correspondingly known as the "large block"), which covers the mid range and higher engine capacities up to 2400cc.
Originally produced at the Aspern engine plant, production was moved to the Szentgotthárd engine plant in Hungary[2] with the introduction of the DOHC version. GM do Brasil at São José dos Campos,[3] GMDAT at Bupyeong and GM North America at Toluca also build these engines. The Family II units, by contrast were manufactured by Holden in Australia.
Design
[edit]The Family 1 engines are inline-four cylinder engines with belt-driven single or double overhead camshafts in an aluminum cylinder head with a cast iron engine block. GM do Brasil versions were also capable of running on ethanol. These engines share their basic design with the larger Family II engine – for this reason some consider the Family I and Family II to be the same series and instead use the terms 'small block' and 'large block' to distinguish between the two. Over the years there has been overlap between the two types as the smallest capacities of the Family II have also been manufactured with larger capacity versions of the Family I block.
Early build versions of the engine gained a notorious reputation for camshaft and follower failure – this was largely due to a special lubricant being used in the engine during the running in period, which would be changed for conventional oil at the first service. Many owners (familiar with the servicing requirements of the older overhead valve units that the Family I/II replaced) would often exacerbate the problem by changing the oil themselves within the running in period. Opel solved the problem by improving the metallurgy of the camshaft and followers, and changing the lubrication specification. Another issue (also common to the Family II),revolved around the water pump, which sits in an eccentric shaped housing and doubles as the timing belt tensioner. If poor quality antifreeze (or if no antifreeze was used), corrosion would jam the water pump in its housing making it impossible to tension the belt. Later versions of the engine incorporate a separate tensioning/jockey pulley for tensioning the belt.
GM do Brasil specializes in SOHC, petrol-powered and FlexPower (powered with ethanol and/or petrol, mixed in any percentage) engines. GM Brasil also made 16-valve versions of the 1.0 engine. The 1.0 L 16v was available in the Corsa line-up from 1999 to 2001.
Opel engine codes explained | |||||
---|---|---|---|---|---|
1. = Emissions controls | 2./3. = Displacement (in tenths of liters) | 4. = Compression ratio | 5. = Fuel feed | 6. = Special conditions | |
A = Austria, Euro 5 since 2007 | 14 = 1.4 Liter | G = < 8.5:1 | E = Multi-point fuel injection | A = Egyptian market/revised version | P = High Output (until 2000) |
B = Euro 6 | 16 = 1.6 liter | L = > 8.5–9.0:1 | F = FlexFuel (E85) | B = Bedford/IBC | P = TwinPort (since 2000) |
C = Three-way catalytic converter, Euro 1 | 17 = 1.7 liter | N = > 9.0–9.5:1 | H = Direct injection | D = Daewoo (D-TEC) | Q = Colombia |
E = Euronorm catalytic converter | 18 = 1.8 liter | S = > 9.5–10.5:1 | L = LPG | E = Ecoflex? | R = enhanced power |
H = Australian ADR 37 ("Holden") | 20 = 2.0 liter | X = > 10.5–11.5:1 | N/NG = Natural gas | F = government fleet (de-tuned) | S = Increased power/turbocharging |
S = Swedish/Swiss A 10/11 emissions | 25 = 2.5 liter | Y = > 11,5:1 | V = Carburettor | G = Natural gas | T = Turbocharger/special version |
X = Euro 2 | 30 = 3.0 liter | D = Diesel | Z = Single-point injection | H = high output/forced induction | U = Uruguay |
Y = Euro 3 | I = Irmscher | V = Volume model | |||
Z = Euro 4 | J = adjusted output | W = Venezuela | |||
empty = no emissions controls/ECE R83A | K = Comprex | 1 = Family 1 engine | |||
L = reduced power/low pressure turbo | 2 = Family II engine | ||||
M = Middle East/Common Rail Diesel | empty = no special condition |
SOHC
[edit]SOHC | |
---|---|
![]() A later fuel injected version (C14NZ) Family I engine in a 1993 Opel Astra F | |
Overview | |
Production | 1979–present |
Layout | |
Displacement |
|
Cylinder bore |
|
Piston stroke |
|
Valvetrain | Single overhead cam |
Compression ratio |
|
Combustion | |
Fuel system | |
Fuel type |
|
the first versions of the Family I appeared in the Opel Kadett D in 1979, and the corresponding Vauxhall Astra Mk.1 in the spring of 1980.
1.0
[edit]The 999 cc (61.0 cu in) version has a 71.1 mm (2.80 in) bore and a 62.9 mm (2.48 in) stroke.
Engine | Power | Torque | Compression Ratio | Fuel Delivery | Engine Management | Applications | Notes |
---|---|---|---|---|---|---|---|
C10YEH (VHC) | 70–71 hp (51–52 kW) at 6400 rpm | 86 N⋅m (63 lb⋅ft) at 3000 rpm | Multi-point fuel injection | Multec | |||
X10YFL (Flexpower Classic) | 70–72 hp (51–53 kW) at 6400 rpm | 86–88 N⋅m (63–65 lb⋅ft) at 5200 rpm | 12.6:1 | Multi-point fuel injection | Multec FR4 | Higher outputs when using ethanol | |
X10YFH (VHC Flexpower) | 77–78 hp (57–57 kW) at 6400 rpm | 91–92 N⋅m (67–68 lb⋅ft) at 3200 rpm | 12.6:1 | Multi-point fuel injection | Motronic 7.9.9 | Higher outputs when using ethanol | |
N10YFH (VHC-E Flexpower) | 77–78 hp (57–57 kW) at 6400 rpm | 93–95 N⋅m (69–70 lb⋅ft) at 3200 rpm | 12.6:1 | Multi-point fuel injection | Multec MT27E | Higher outputs when using ethanol |
1.2
[edit]There are two iterations of the 1.2-liter Family 1 engine. As originally introduced it was called the 12ST (also A12ST and S12ST in versions for the Austrian, Swiss, and Swedish markets), it used a 77.8 mm (3.06 in) bore and a 62.9 mm (2.48 in) stroke to produce a displacement of 1,196 cc (73.0 cu in). This version, only carburetted, was used in the Opel Corsa.[4] In around 1990 a new, version with 72.0 mm × 73.4 mm (2.83 in × 2.89 in) bore and stroke, a narrower bore version of the existing 1.3-litre version, displacing 1,195 cc (72.9 cu in), replaced the original design. This was also available with single-point fuel injection and with catalytic converters.
Engine[4] | Power | Torque | Compression Ratio | Fuel Delivery | Cat. | Applications | Years |
---|---|---|---|---|---|---|---|
1196 cc, 77.8 mm × 62.9 mm (3.06 in × 2.48 in) | |||||||
A12ST | 50 hp (37 kW) at 5600 rpm | 88 N⋅m (65 lb⋅ft) at 2200 rpm | 9.2:1 | Carburetor | – | Opel Corsa A (Austria) | |
12ST/S12ST | 55 hp (40 kW) at 5600 rpm | 90 N⋅m (66 lb⋅ft) at 2200 rpm | Opel Corsa A | 1982–1988 | |||
1195 cc, 72.0 mm × 73.4 mm (2.8 in × 2.9 in) | |||||||
12NV | 52 hp (38 kW) at 5800 rpm | 86 N⋅m (63 lb⋅ft) at 2600 rpm | 9.1:1 | Carburetor | – | Opel Corsa A | 1990–1992 |
12NZ | 45 hp (33 kW) at 5000 rpm | 88 N⋅m (65 lb⋅ft) at 2800 rpm | 9.4:1 | Single-point fuel injection | Opel Corsa B | 1993–1995 | |
C12NZ | 45 hp (33 kW) at 5000 rpm | 88 N⋅m (65 lb⋅ft) at 2400 rpm | ● | Opel Corsa A Opel Corsa B |
1990–1993 1993–1995 | ||
X12SZ | 45 hp (33 kW) at 4600 rpm | 88 N⋅m (65 lb⋅ft) at 2800 rpm | 10.0:1 | Opel Corsa B | 1995–1997 |
1.3
[edit]The 1,297 cc (79.1 cu in) version has a 75.0 mm (2.95 in) bore and a 73.4 mm (2.89 in) stroke.
Engine[4] | Power | Torque | Compression Ratio | Fuel Delivery | Engine Management | Applications |
---|---|---|---|---|---|---|
13N | 60 hp (44 kW) at 5800 rpm | 94–96 N⋅m (69–71 lb⋅ft) at 3800 rpm | ||||
13Nb | 60 hp (44 kW) at 5800 rpm | 96 N⋅m (71 lb⋅ft) at 3200 rpm | Opel Corsa A | |||
13S | 68–75 hp (50–55 kW) at 5800 rpm | 96–101 N⋅m (71–74 lb⋅ft) at 3800–4600 rpm | ||||
13SB | 70 hp (51 kW) at 5800 rpm | 101 N⋅m (74 lb⋅ft) at 3800–4200 rpm | Opel Corsa A | |||
13SH | 83 hp (61 kW) at 5800 rpm | 108 N⋅m (80 lb⋅ft) at 4200 rpm | 9,5:1 | Multi-point fuel injection | Bosch LE-Jetronic | Opel Corsa A (Irmscher) |
1.4
[edit]The 1,389 cc (84.8 cu in) version has a 77.6 mm (3.06 in) bore and a 73.4 mm (2.89 in) stroke.
Engine[5] | Power | Torque | Compression Ratio | Fuel Delivery | Engine Management | Applications |
---|---|---|---|---|---|---|
14NV | 72 hp (53 kW) at 5600 rpm 75 hp (55 kW) at 5600 rpm |
106 N⋅m (78 lb⋅ft) at 3000 rpm | 9.4:1 | Pierburg 2E3 twin barrel carburettor |
| |
C14NZ | 60 hp (44 kW) at 5600 rpm | 101 N⋅m (74 lb⋅ft) at 2800 rpm | 9.4:1 | Single-point fuel injection |
| |
C14SE | 82 hp (60 kW) at 5800 rpm | 116 N⋅m (86 lb⋅ft) at 3400 rpm | 9.8:1 | Multi-point fuel injection |
| |
Chevrolet Kalos/Aveo | ||||||
X14YFL |
|
|
12.4:1 | Multi-point fuel injection |
| |
X14YFH | 99 hp (73 kW) at 6000 rpm | 129 N⋅m (95 lb⋅ft) at 2800 rpm |
| |||
98 hp (72 kW) at 6200 rpm | 127 N⋅m (94 lb⋅ft) at 2800 rpm | 2013–2019 Chevrolet Prisma Mk II | ||||
N14YF | 97–102 hp (72–76 kW) at 6000 rpm | 126–132 N⋅m (93–97 lbf⋅ft) at 3200 rpm |
1.6
[edit]The 1,598 cc (97.5 cu in) version has a 79.0 mm (3.11 in) bore and an 81.5 mm (3.21 in) stroke.
Engine[5] | Power | Torque | Compression Ratio | Fuel Delivery | Engine Management | Applications |
---|---|---|---|---|---|---|
C16NZ | 72–75 hp (54–56 kW) at 5200 rpm | 125 N⋅m (92 lb⋅ft) at 2800 rpm | 9.2:1 | Single-point Fuel Injection | ||
C16SE | 100 hp (75 kW) at 5800 rpm | 135 N⋅m (100 lb⋅ft) at 3400 rpm | 9.8:1 | multi-point fuel injection | ||
C16SEI | 98 hp (73 kW) at 5600 rpm | 132 N⋅m (97 lb⋅ft) at 3400 rpm | Opel Corsa A | |||
E16SE | 100 hp (75 kW) at 5800 rpm | 135 N⋅m (100 lb⋅ft) at 3400 rpm | Opel Corsa A | |||
L73 | 74 hp (55 kW) at 5600 rpm | 120 N⋅m (90 lb⋅ft) at 2800 rpm | 8.6:1 | throttle-body fuel injection |
| |
G16SF | 92 hp (68 kW) at 5600 rpm | throttle-body fuel injection | GM Multec Central | 1988–1993 Pontiac LeMans LS
1988–1991 Passport Optima | ||
Z16SE | 64 kW (86 hp) at 5400 rpm | 133 N⋅m (98 lb⋅ft) at 2600 rpm | 9.6:1 | multi-point fuel injection |
| |
L91 | 79 kW (106 hp) at 6400 rpm | 143 N⋅m (105 lb⋅ft) at 3800 rpm | 10.8:1 | multi-point fuel injection | ||
X16SZ | 52 kW (72 hp) at 5000 rpm | 128Nm at 2800 rpm | 10.0:1 | Single-point fuel injection | Multec-SZ | Opel Vectra A
Opel Astra F |
16SV | 82 bhp@5400 | 130 N⋅m (96 lb⋅ft) @ 2600 rpm | Carburettor | Vauxhall Cavalier MK3
MK2 Astra |
1.8
[edit]The 1,796 cc (109.6 cu in) version has an 80.5 mm (3.17 in) bore and an 88.2 mm (3.47 in) stroke.
Engine | Power | Torque | Compression Ratio | Fuel Delivery | Engine Management | Applications |
---|---|---|---|---|---|---|
N18XFH | 106–115 hp (79–86 kW) at 5600 rpm | 161–168 N⋅m (119–124 lb⋅ft) at 3200 rpm | 10.5:1 | Multi-point fuel injection | ||
F18S2 | 98-102 hp at 5200 rpm | 146-149 Nm at 2800 rpm | multi-point fuel injection | Chevrolet Rezzo
Daewoo Tacuma Daewoo Leganza |
Applications:
- Chevrolet Corsa
- Chevrolet Montana
- Opel Meriva
- Fiat Palio
- Fiat Siena
- Fiat Strada
- Fiat Idea
- Fiat Punto
- Fiat Stilo
SPE / 4
[edit]The SPE / 4 or (Smart Performance Economy 4 cylinders) engines are an evolution of the Econo.Flex engines that were made in Brazil at the Joinville plant. There are two available displacements: 1.0 L and 1.4 L. They feature an SOHC head with 2-valves per cylinder, and is fed by a multi-point fuel injection system, which allows it to run on either E100 (pure ethanol) or E25 gasoline (standard in Brazil). Major differences between previous engines include reduced friction, lowered weight, individual coil-near-plug ignition, and a new cylinder head design.
Name | Displacement | Bore | Stroke | Compression Ratio | Power | Torque | Applications |
---|---|---|---|---|---|---|---|
1.0 L (999 cc) | 71.1 mm (2.8 in) | 62.9 mm (2.5 in) | 12.4:1 |
|
|
| |
1.4 L (1389 cc) | 77.6 mm (3.1 in) | 73.4 mm (2.9 in) |
|
|
DOHC
[edit]DOHC | |
---|---|
X18XE1 | |
Overview | |
Production | (1.4, 1.6L engines):1992[2]-present, (1.8L x18xe1):1999[2]-2000, (1.8L z18xe):2000[2]-2008 |
Layout | |
Configuration | |
Displacement |
|
Cylinder bore |
|
Piston stroke |
|
Valvetrain | Dual overhead cam |
Compression ratio |
|
Combustion | |
Fuel system | |
Fuel type |
|
Pre-Ecotec
[edit]This was the first engine in this family, featuring a Lotus-developed 16-valve cylinder head and a cast-iron cylinder block which was essentially the same as in Opel's 8-valve engines. C16XE was available only in Corsa GSi, model years 1993 and 1994. C16XE was not yet badged Ecotec, and for later model Corsas and Opel Tigras it was replaced with X16XE Ecotec engine. The main difference between C16XE and X16XE Ecotec is emission control, C16XE lacks EGR and AIR-system, although the cylinder head is designed to enable these features. Other differences between C16XE and later versions of the engine include intake manifold, C16XE has a plastic upper intake manifold, which was replaced with a cast aluminium manifold, and fuel injection system, C16XE uses Multec fuel injection with MAF sensor and later models used Multec fuel injection with MAP sensor. Also, while C16XE had its own exhaust front section design, for X16XE it was replaced with a front section used also in Opel Astra, probably as a cost-saving measure.
Name | Displacement | Bore | Stroke | Compression Ratio | Power |
---|---|---|---|---|---|
C16XE | 1.6 L (1598 cc) | 79 mm (3.1 in) | 81.5 mm (3.21 in) | 10.5:1 | 80 kW (110 hp) |
Applications:
- 1993–1994 Opel Corsa GSi
Ecotec
[edit]The first generation Ecotec engines are belt-driven 16-valve DOHC engines, with cast-iron cylinder blocks and aluminum cross-flow cylinder heads. They feature sodium-filled exhaust valves, a cast steel crankshaft, and a spheroidal graphite flywheel. They also feature exhaust gas recirculation (EGR), secondary air injection, and Multec M engine control with sequential multiport fuel injection. The 1.6 L version was also exported for use in the Brazilian Corsa GSi.
Name | Displacement | Bore | Stroke | Compression Ratio | Power | Torque |
---|---|---|---|---|---|---|
X14XE | 1.4 L (1389 cc) | 77.6 mm (3.1 in) | 73.4 mm (2.9 in) | 10.5:1 | 66 kW (89 hp) | 125 N⋅m (92 lb⋅ft) |
X16XEL | 1.6 L (1598 cc) | 79 mm (3.1 in) | 81.5 mm (3.2 in) | 74 kW (99 hp) | 150 N⋅m (110 lb⋅ft) | |
X16XE | 78 kW (105 hp) | |||||
X18XE1 | 1.8 L (1796 cc) | 80.5 mm (3.2 in) | 88.2 mm (3.5 in) | 85 kW (114 hp) | 167 N⋅m (123 lb⋅ft) |
Applications:
- 1994–2000 Opel Corsa
- 1994–2000 Opel Tigra
- 1999–2005 Opel Zafira using Siemens Simtec ECU
- Opel Astra
- Opel Vectra
- 2004–2008 Chevrolet Viva
- Fiat Stilo
- Chevrolet Corsa GSi/GLS
- Buick Excelle
Electronic throttle
[edit]Updated version introduced from 2000, with lighter cast-iron cylinder block and camshaft driven by toothed belt. Features EGR valve and electronic throttle for reduced emissions.
Name | Displacement | Bore | Stroke | Compression Ratio | Power | Torque | Applications |
---|---|---|---|---|---|---|---|
Z14XE | 1.4 L (1389 cc) | 77.6 mm (3.1 in) | 73.4 mm (2.9 in) | 10.5:1 | 66 kW (89 hp) | 120 N⋅m (89 lb⋅ft) |
|
Z16XE | 1.6 L (1598 cc) | 79 mm (3.1 in) | 81.5 mm (3.2 in) | 74 kW (99 hp) | 150 N⋅m (110 lb⋅ft) | ||
Z18XE | 1.8 L (1796 cc) | 80.5 mm (3.2 in) | 88.2 mm (3.5 in) |
|
167 N⋅m (123 lb⋅ft) | ||
Z16XEP | 1.6 L (1598 cc) | 79 mm (3.1 in) | 81.5 mm (3.2 in) | 77 kW (103 hp) | 150 N⋅m (110 lb⋅ft) |
|
Ecotec TwinPort Family 1 engine (Z16XEP) is used in:
- Opel Zafira 2005–2007
- Opel Meriva 2005–2010
- Opel Astra 2003–2004 2004–2007
- Opel Vectra 2006–2008
E-TEC
[edit]E-TEC | |
---|---|
![]() 1.5 L E-TEC 16V | |
Overview | |
Also called |
|
Production | -2009 |
Layout | |
Displacement |
|
Cylinder bore |
|
Piston stroke |
|
Valvetrain | |
Combustion | |
Fuel system | Sequential multi-port fuel injection |
Fuel type |
|
Daewoo Motors licensed and produced a variant of the Family 1 engine. These engines were built exclusively at Bupyeong engine plant and marketed as E-TEC. Like all Family 1 engines they feature a toothed belt driven valvetrain, a cast-iron engine block and an aluminum cylinder head. Most models feature Euro III-compliancy, and the 1.4 L (1399 cc) and 1.6 L (1598cc) versions employ variable intake geometry. With the release of Chevrolet Cruze, the factory has been converted to produce the Ecotec Family 1 Gen III block.
SOHC
[edit]Name | Displacement | Bore | Stroke | Compression Ratio | Power | Torque |
---|---|---|---|---|---|---|
A13SMS | 1.3 L (1299 cc) | 76.5 mm (3.01 in) | 71.5 mm (2.81 in) | |||
A13SMS | 1.4 L (1349 cc) | 73.4 mm (2.89 in) | ||||
A15SMS | 1.5 L (1498 cc) | 81.5 mm (3.21 in) | 9,5 : 1 | 85 PS (63 kW; 84 hp) at 5800 rpm | 130 N⋅m (96 lb⋅ft) at 3400 rpm | |
G15SF/G15MF | 70 PS (51 kW; 69 hp) at 5200 rpm | 117 N⋅m (86 lb⋅ft) at 3000 rpm |
Applications:
- Daewoo Lanos
- Daewoo Racer/Pointer *Only in Chile
- Daewoo LeMans
- Daewoo Espero
- Daewoo Nexia
- Chevrolet Lacetti
- Chevrolet Nubira
- Chevrolet Aveo
DOHC
[edit]The E-TEC II 16V is an updated version of the E-TEC engines with DOHC.
Name | Displacement | Bore | Stroke | Compression Ratio | Power | Torque |
---|---|---|---|---|---|---|
(L95) | 1.4 L (1399 cc) | 77.9 mm (3.1 in) | 73.4 mm (2.9 in) | 9.5:1 | 70 kW (94 hp) at 6200 rpm | 127 N⋅m (94 lb⋅ft) at 3400 rpm |
(LDT) | 74 kW (99 hp) at 6400 rpm | 131 N⋅m (97 lb⋅ft) at 4200 rpm | ||||
A15MF | 1.5 L (1498 cc) | 76.5 mm (3.01 in) | 81.5 mm (3.21 in) | 63 kW (84 hp) at 5400 rpm | 131 N⋅m (97 lb⋅ft) at 3000 rpm | |
(L91) | 1.6 L (1598 cc) | 79 mm (3.1 in) | 77 kW (103 hp) at 6000 rpm | 145 N⋅m (107 lb⋅ft) at 3600 rpm | ||
(LXT) | 77 kW (103 hp) at 5800 rpm | 145 N⋅m (107 lb⋅ft) at 3400 rpm |
Applications:
Generation III
[edit]Generation III | |
---|---|
Overview | |
Also called |
|
Production | 2005–present |
Layout | |
Configuration | |
Displacement |
|
Cylinder bore |
|
Piston stroke |
|
Valvetrain | Dual overhead cam |
Combustion | |
Turbocharger | Some version |
Fuel system | |
Fuel type |
|
The new Generation III or Gen III engine entered production in Spring 2005. These engines replaced both the previous generation Ecotec engines as well as Daewoo's E-TEC 16V engines. These engines are manufactured at Szentgotthárd, Hungary, Bupyeoung, Korea, Toluca, Mexico and Yantai, PRC (SGM).
In contrast to their predecessors, the Gen III engines feature lighter cast-iron blocks, as well as higher compression ratios. These engines also implement DCVCP (Double Continuous Variable Cam Phasing technology, a variant of VVT), piston cooling by oil jets, and an integrated catalytic converter. Non-turbocharged variants feature the TwinPort (Variable-length intake manifold) technology. Reliability improvements include a wider camshaft drive belt, and a water pump no longer driven by it.
The LDE engine meets Euro VI and KULEV emission standards. With the addition of secondary air injection to the LUW engine, the LWE achieves PZEV status.
These engines, like their DOHC predecessors, feature bucket tappets in contrast to the roller finger followers found on GM's other 4-cylinder engines.
Name | Displacement | Bore | Stroke | Compression Ratio | Power | Torque |
---|---|---|---|---|---|---|
Z16XER | 1.6 L (1598 cc) | 79 mm (3.1 in) | 81.5 mm (3.2 in) | 10.8:1 | 85 kW (114 hp) at 6000 rpm | 155 N⋅m (114 lb⋅ft) at 4000 rpm |
A16XER (LDE) | ||||||
(LXV) | 81 kW (110 PS) at 6400 rpm | 142 N⋅m (105 lb⋅ft) at 4000 rpm | ||||
(LGE) | 10.5:1 | 110 kW (150 PS) at 5000 rpm |
| |||
Z16LEL | 8.8:1 | 110 kW (150 PS) at 5000 rpm | 210 N⋅m (150 lb⋅ft) at 1850–5000 rpm | |||
A16LEL | ||||||
Z16LET | 132 kW (179 PS) at 5500 rpm | 230 N⋅m (170 lb⋅ft) at 2200–5400 rpm | ||||
A16LET (LLU) | ||||||
Z16LER | 141 kW (192 PS) at 5000 rpm | 230 N⋅m (170 lb⋅ft) at 1980–5800 rpm | ||||
A16LER (LDW) (B16LER) | 141 kW (192 PS) at 5850 rpm |
| ||||
A16LES (B16LES) | 154 kW (209 PS) at 5850 rpm |
| ||||
X18XF (Flex) | 1.8 L (1796 cc) | 80.5 mm (3.2 in) | 88.2 mm (3.5 in) | 10.5:1 | 84 kW (113 hp) at 5600 rpm | 175 N⋅m (129 lb⋅ft) at 2800 rpm |
Z18XER | 103 kW (140 PS) at 6300 rpm | 175 N⋅m (129 lb⋅ft) at 3800 rpm | ||||
A18XER (2H0) (F18DA) | ||||||
P18XER (LWE) | ||||||
U18XFR (LUW) | ||||||
N18XFF (LFH) | 107 kW (143 hp) at 6300 rpm | 185 N⋅m (136 lb⋅ft) at 3800 rpm |
Applications:
- 2005–2008 Opel Vectra (Z18XER)
- 2007–2008 Opel Signum (Z18XER)
- 2005–2019 Opel Zafira
- 2005–2012 Opel Astra
- 2008–2016 Chevrolet Cruze (1.8L LUW/2H0/LDE/LWE)
- 2009–2017 Opel Insignia
- 2009–2014 Chevrolet Aveo (1.6L in Europe, 1.6L LXV)
- 2012–2018 Chevrolet Sonic (1.8L LUW/LWE in North America)
- 2011–2015 Chevrolet Orlando (1.8L 2H0)
- 2007–2009 Holden Astra (AH)
- 2012–2013 Baojun 630
- Alfa Romeo 159
- 2005–2011 Fiat Croma
- 2012–2018 Opel Mokka
Turbocharged Gen III engines are used in:
- 2006–2009 Opel Meriva (OPC Model)
- 2007–2018 Opel Corsa (GSi and OPC Models)
- 2008–2012 Opel Insignia
- 2010–2015 Buick Excelle GT
- 2010–2015 Buick Excelle XT
- 2011–2012 Saab 9-5
- 2007–2012 Opel Astra
- 2012–2017 Buick Verano (1.6 Turbo)
- 2012–2020 Chevrolet Sonic (LT, LTZ Models)
- 2011–2020 Chevrolet Cruze (China, North America) and Holden Cruze (Australasia)
- 2016–present Chevrolet Malibu
References
[edit]- ^ "Werk Aspern Plant. Facts and Figures". General Motors. Retrieved 18 July 2014.
- ^ a b c d "Szentgotthard Plant. Facts and Figures". Opel Media. Retrieved 28 May 2014.
- ^ "São José dos Campos Industrial Complex" (PDF). GM do Brasil. p. 3. Archived from the original (PDF) on 21 March 2019.
- ^ a b c "Motoroversigt. Opel Benzin- og Diesel-motorer ('57–'86)" [Engine overview: Opel petrol and diesel engines] (PDF) (in Danish). historisk-opelklub.dk. 2011. p. 2. Retrieved 23 May 2014.
- ^ a b Oversigt, p. 3
External links
[edit]![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)