T-slot structural framing
This article needs additional citations for verification. (April 2022) |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/e/ef/Extruded_aluminium_section_x3.jpg/220px-Extruded_aluminium_section_x3.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/72/T-SLOT_1964.png/220px-T-SLOT_1964.png)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/f3/8020-Fractional-Profiles-1.svg/220px-8020-Fractional-Profiles-1.svg.png)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/a2/Bicycle-trailer-for-outdoor-trekking.jpg/220px-Bicycle-trailer-for-outdoor-trekking.jpg)
T-slot structural framing is a framing system consisting of lengths of square or rectangular extruded aluminium, typically 6105-T5 aluminium alloy, with a T-slot down the centerline of one or more sides.
It is also known under several generic names, such as aluminium extrusion, aluminium profile and 2020 extrusion if the cross-section is 20x20 mm, alongside brand names, such as 80/20 framing.[1]
While the precise history of the T-slot framing system is not known, advancement in extrusion press technology in the early 1950s allowed for economic production of aluminium profiles,[2] and examples of use can be found from the early 1960s.[3]
Although no published standard defines the system, it is produced in a series of conventional sizes which allows for compatibility between manufacturers.
There is a variation on T-slot profiles known as V-slot rails where V-slot wheels are slotted into the V-shaped channels of the framing for linear motion in a 3D printer or other CNC machine.
Profiles
[edit]T-slot framing is divided into metric and fractional (imperial) categories. The T-slot is always centered along the long-axis of the piece. Pieces are available in each series with a square cross-section. Rectangular cross sections are also available which measure x by 2x (where x is the defined width) - e.g. 40mm by 80mm for 40 series.
Profile type |
Profile name |
Profile size |
---|---|---|
fractional | 10 series | 1" |
15 series | 1.5" | |
metric | 20 series | 20 mm |
25 series | 25 mm | |
30 series | 30 mm | |
40 series | 40 mm | |
45 series | 45 mm |
-
CAD model of a rotating T-slot nut used with aluminium T-slots/ T-track/ extrusions
-
T-nut (red) installed in a T-slot
See also
[edit]References
[edit]![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- ^ "Find out About Our Mission and Vision Here at 80/20". 8020.net. Archived from the original on 2022-03-06. Retrieved 2022-05-15.
- ^ Bauser, M; Sauer, G; Siegert, K (2006). Extrusion (2 ed.). Materials Park, Ohio: ASM International. p. 6. ISBN 978-0-87170-837-3.
- ^ US patent US3143981A, Leslie E Tassell, "Demountable partition", published 1964-08-11, issued 1964-08-11, assigned to Tassell Hardware Co