Jump to content

Clearance car

From Wikipedia, the free encyclopedia
(Redirected from Structure gauging car)
A Washington Metro railcar, originally built for passenger service, later converted to a clearance car. Note the addition of feelers to the car.

A clearance car is a type of railroad car in maintenance of way service. Its purpose is to check the clearances around the tracks and ensure that trains conforming to the railroad's standard loading gauge or dynamic envelope will not encounter any obstruction. Additionally, by measuring the actual clearances along a route, the railroad can determine whether outsize loads can be accommodated along that route, and the largest size feasible.[1]

Design

[edit]
A clearance car built to test the ability of impending new locomotives – significantly bigger than their predecessors – to go past platforms and other potential obstructions on the South Australian Railways when the locos arrived in 1926

Early clearance cars simply consisted of an outline of the system loading gauge attached to a railroad car, which would be towed along the route to ensure the clearances were still sufficient.[citation needed]

Later clearance cars functioned by using physical feelers—rods which extended from the car in all directions which would be deflected back by obstructions. These would be connected to instrumentation which displayed the actual clearance at that point. These feelers have an advantage in that they bounce back and do not break if they do hit something.[citation needed]

Subsequently, clearance cars using lasers for measurement have come into service. These are generally HiRail trucks – road vehicles with supplemental rail wheels.[citation needed]

Benefits

[edit]

The clearance car allowed accurate and speedy measurement of the clearances for a structure. Generally they were only owned by larger railroads; other railroads sometimes leased them for short periods. Some were self-propelled, while others were locomotive-hauled.

[edit]

See also

[edit]

References

[edit]
  1. ^ "Close-Clearance Conditions Near Railroad Tracks" (PDF). Iowa Department of Transportation. 6 December 2002.
[edit]