Sendzimir process
Appearance
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/03/Galvanized_surface.jpg/220px-Galvanized_surface.jpg)
Sendzimir process (named after Tadeusz Sendzimir) is used to galvanize a steel strip by using a small amount of aluminum in the zinc bath and producing a coating with essentially no iron-zinc alloy. The process guarantees high resistance and durability characteristics. About 75% of hydrogen was needed in the original Sendzimir process but all the newer nonoxidizing methods of degreasing require only 7–15%.[1]
The rolling of hot steel slabs using a Sendzimir mill requires a much smaller operational area than a continuous hot strip mill. This milling process is not recommended for heavy duty running surfaces such as crane rail.
See also
[edit]References
[edit]- ^ F. Porter. Zinc Handbook. 1991.