Jump to content

Glossary of automotive design

From Wikipedia, the free encyclopedia
(Redirected from Rocker panel)

A glossary of terms relating to automotive design.

Some terms may be found at car classification.

0–9

[edit]
One-box form Chevrolet Van, replica of the Mystery Machine
One-box form
A categorization based on overall form design using rough rectangle volumes. In the case of the one-box, also called a monospace or monovolume,[1] it is a single continuous volume. Slight wedge formed front or rear are still generally placed in this category. E.g. buses and the original Ford Econoline. The equivalent French term is volume, which will sometimes be used by the British: "1-volume form".
Two-box form Volvo P1800 ES shooting-brake
Two-box form
A categorization based on overall form design using rough rectangle volumes. In the case of the two-box form, there is usually a "box" representing a separate volume from the a-pillar forward and second box making up the rest. E.g., Station wagon, shooting-brake, Scion xB (2006). The equivalent French term is volume, which will sometimes be used by the British: "2-volume form".
Three-box form Alfa Romeo Giulia (Type 105) sedan/saloon
Three-box form
A categorization based on overall form design using rough rectangle volumes. In the case of the three-box form, there is a "box" delineating a separate volume from the a-pillar forward, a second box comprising the passenger volume, and third box comprising the trunk area—e.g., a Sedan. The equivalent French term is volume, which will sometimes be used by the British: "3-volume form".

A

[edit]
The 1989 logo for the Opel Calibra emphasized the A-line
A-line
The line running over the car, from headlight to taillight, tracing the car's silhouette.

B

[edit]
The backlight of the Oldsmobile Cutlass Supreme is curved to improve visibility
Backlight
Rear glass panel.
This Honda Accord carries a beltline crease running along the side through the door handles
Beltline
A demarcation or crease between a vehicles body panels and the side windows. Typically it refers to where an individual wears a belt attached to trousers.
The batsman's crease on the centreline of the 1963 Chevrolet Corvette (C2) is carried from the roof to the tail
Batsman's crease
A tangent break feature line running along the centreline of a car. This kind of feature can be seen on many modern Vauxhall, Opel and Chrysler models. Literally derived from the break found on the rear side of a cricket bat.
The instruments of this Ford Thunderbird are set in chrome bezels
Bezel
The trim or bodywork that surrounds a light, holds the face of an instrument in position, or decoratively conceals gaps between bodywork and components as an escutcheon. Often chrome or plastic
Twin binnacles of Chevrolet Corvette (C2)
Binnacle
The housing for the instrument cluster on top of or as part of the dashboard.
Front-hinged bonnet of a Nissan Skyline (KPGC10)
Bonnet
The body panel of the vehicle that covers the engine. Typically a horizontal surface, hinged at the cowl, but sometimes hinged at the headlights instead. Also known as a hood.
1957 Rambler Custom estate / station wagon with opened boot
Boot
The trunk or liftgate of the vehicle that opens for access to the cargo area. Typically at the rear of the vehicle.
Virgil Exner's design for the 1955–56 Imperial included extensive brightwork in the grille, bumper, wheels, and window trim
Brightwork
Anything reflective added to a car to enhance appearance. May also be called chrome.
Worker fits components to this body in white of a Toyota Corolla at the Ōhira, Miyagi plant
BiW
Body in White. Base chassis before customisation.
BMW i8 with open butterfly doors
Butterfly doors
A type of door sometimes seen on high-performance cars. They are similar to but distinguished from scissor doors by their hinge point. While scissor doors move straight up via hinge points at the bottom of the A-pillar, butterfly doors move up and out via hinges along the A-pillar.
Bustle back of a Cadillac Seville
Bustle back
First seen on the second generation Cadillac Seville, this was a short lived design trend. Inspired by the English coachbuilder Hooper & Co.'s "Empress Line" designs from the early 1950s, these were a unique take on trunk-body integration allowing for a shortened trunk and a rakish rear end.

C

[edit]
The cabin of the Jeep Forward Control is on top of the front axle
Cab
Short for cabin. The enclosed compartment of a vehicle which contains the driver and passengers.
Cab back
The cab of the vehicle is moved to the rear of the vehicle. Cars such as a 1970s Corvette could be considered cab back design.
Cab forward
The cab of the vehicle is pushed forward. This design aesthetic was popular with Chrysler in the 1990s with the introduction of their LH platform cars.
Carrosserie
Bodywork of a vehicle. Also the workshop at which automotive body work is built on a prototype or low volume production basis, typically with extensive handwork.
Character line
A line creased into the side of a car to give it visual interest. (interchangeable with swage line) Sometimes implemented by a rubbing strip.
Chrome
Brightwork using chrome plating.
The gray plastic cladding of a Pontiac Montana contrasts with the red body panels
Cladding
Material (usually plastic) added to exterior of the car which isn't structurally necessary. May be functional to keep out dirt/debris as in underbody cladding, or may be cosmetic.
Control panel for HVAC functions in a Toyota Avanza
Control panel
Generally used in a car or truck for heating and cooling inside car environment according to the passenger requirements. Basically it is divided into different modes, blower speed functions, AC, temperature, and fresh recirculation of air. Worldwide control panel manufacturers are BHTC, Delphi, Visteon, Valeo, etc.
Cowl
The base of the windshield.

D

[edit]
1954 Cadillac Coupe DeVille featuring prominent bullet-shaped Dagmar bumpers
Dagmar bumpers
A slang term for chrome conical shaped styling elements which began to appear on the front bumper/grille assemblies of certain American automobiles following World War II. The term is derived from the notable physical attributes of Dagmar, a buxom early 1950s television personality known for low-cut gowns and pronouncedly conical bra cups.
Daylight Opening (DLO)
refers to the window openings in the § Greenhouse of a vehicle
US DOT Term: For openings on the side of the vehicle, other than a door opening, the locus of all points where a horizontal line, perpendicular to the vehicle longitudinal centerline, is tangent to the periphery of the opening.
US DOT Term: For openings on the front and rear of the vehicle, other than a door opening, daylight opening means the locus of all points where a horizontal line, parallel to the vehicle longitudinal centerline is tangent to the periphery of the opening.
U-shaped daytime running lamps of a Chevrolet Bolt EV
Daytime Running Lamp (DRL)
A daytime running lamp (DRL, also daytime running light) is an automotive lighting and bicycle lighting device on the front of a roadgoing motor vehicle or bicycle,[1] automatically switched on when the vehicle is in drive, emitting white, yellow, or amber light. Their job isn't to help the driver see the road but to help other road users see the vehicle.
Dash-to-axle ratios of a Mini and Lincoln Continental presidential limousine
Dash-to-Axle (ratio)
The critical relationship between front wheel centers and the windshield base. The most notable differences can be seen between cars with front-engine, front-wheel drive layout and front mid-engine, rear-wheel drive layout: the former tend to have longer front overhangs with a smaller dash-to-axle ratios, while the latter have shorter front overhangs with much greater dash-to-axle. Most so called premium vehicles (equipped with rear wheel drive) feature a relatively long dash-to-axle ratio.[2]
Deck
The horizontal surface at the rear of the car, which usually serves as the trunk lid.
The Volkswagen Golf Harlequin features multi-color body panels; in this example, the dog leg is yellow, extending from the rocker to the roof
Dog leg
The area behind the rear door on a four-door car. This area is part of the quarter panel just behind the door and in front of the rear wheel house.
Down the Road Graphics (DRG)
The styling of the front end of the car, which people will instantly recognize and associate with a manufacturer. For example, the grille, lights and sometimes the DLO.
Droptop
A convertible.

F

[edit]
Fairing
An external structure added to increase streamlining, deflect wind, and reduce drag.
Fascia
The body-skin panel at the front of the car.
Shelby Mustang GT350 fastback
Fastback
A car body style whose roofline slopes continuously down at the back found on cars with a single convex curve from the top to the rear bumper.
On this Volkswagen Golf Harlequin, the fender or wings are colored blue
Fender (wings, UK)
Term for cowl covering the wheels of the vehicles. In more modern automobiles, this refers generally to the body panel or panels starting at the front "bumper" to the first door line excluding the engine hood. The opposite of the fender is the "quarter panel".
The MG C-type was fitted with a fishtail exhaust
Fishtail Exhaust
A car or motorcycle exhaust tip with the sides forming a tapering design- either horizontal or vertically aligned - often made to look like the tail of a fish . "Koenigsegg Regera" uses a modern example of this design. These were made popular in the 1920's by their implementation in the Brooklands silencer which were necessitated by the noise regulations at the Brooklands race track.
Workers fit an engine with transmission to the frame at the Ford Long Beach Assembly plant
Frame-on-rail
Also known as body-on-frame. A design used in older (pre-unibody) cars, trucks, and SUVs. The power train and body are mounted to a rigid structural vehicle frame, also known as a rail, and the body is a distinct structure that is mounted to the frame. In some cases, the distinction between a body-on-frame and unibody construction are blurred; for example, subframes could be used to carry suspension components, or the body could be a separate module, such as the case of the BMW i3.

G

[edit]
Decorative gill on Chevrolet Corvette (C3)
Gill
A vent on the side of the fender that can be used as hot-air outlet, but usually decorative.
Greenhouse
The glassed-in upper section of the car's body. Daylight Opening (DLO) in turn describes the actual window areas only.
One gull-wing door is open on this DMC DeLorean, modified as a replica of the time machine from the Back to the Future films
Gull-wing door
Car doors that are hinged at the roof rather than the side, as pioneered by the 1952 Mercedes-Benz 300SL race car. Opening upwards, the doors evoke the image of a seagull's wings.

H

[edit]
Oldsmobile Ninety-Eight hardtop coupe
Hardtop
A coupe or sedan lacking a center window post between the front windshield post and the rearmost window post or body section.
Header
The structural roof beam above the windshield.[3] Alternatively, header can refer to the section of exhaust piping attached to the cylinder head.
The Hofmeister kink at the base of the C-pillar of this BMW 3.0 CS is adorned with a BMW roundel
Hofmeister kink
BMW's trademark reverse-sweep kick at the bottom of last roof pillar.
H-point (or HP (Hip Point))
The pivot point between the torso and upper leg portions of the body, either relative to the floor of the vehicle[1] or relative to the height above pavement level, as used in vehicle design.
Hood
The engine cover on vehicles when the engine is located forward or aft of the passenger compartment. Also known as a bonnet in English speaking countries outside North America with the exception of the Canadian Maritimes
HVAC
Heater, ventilation and air condition. A major package constraint both technically as well in interior design.

I

[edit]
The instrument panel of Chitty Chitty Bang Bang, used in the film of the same name
IP
Instrument Panel. The dashboard is termed the instrument panel in the automotive industry. Sometimes this term is confused with the instrument cluster, the group of speedometer, odometer and similar devices generally behind the steering wheel.

K

[edit]
The styling update to the Alfa Romeo Spider in 1970 gave it a Kammback tail
Kammback
A car body style that calls for a body with smooth contours that continues to a tail that is abruptly cut.

L

[edit]
Leafscreen
Plastic clips onto the base of the windscreen under the bonnet to protect from leaves and flowers.
Leafscreen retainer
Bonded to the base of the windscreen to provide a mounting surface for the leafscreen

N

[edit]
The Ferrari F40 features multiple NACA ducts at the front, rear, and sides
NACA duct
A distinctively shaped inlet that is flush and begins with a narrow, shallow inset and becomes progressively wider and deeper. The duct was developed to introduce cooling air into aircraft engine nacelles, while increasing the drag of the nacelle only minimally. The duct was developed at the National Advisory Committee for Aeronautics (NACA).

O

[edit]
The front and rear overhangs of the Acura NSX refer to the body forward of the front wheels and aft of the rear wheels, respectively; OHR = 42.6%
Overhang
The distance the car's body extends beyond the wheelbase at the front (front overhang) and rear (rear overhang). In car style design terms, this is the amount of body that is beyond the wheels or wheel arches. In general, the sum of the front and rear overhangs is equal to the overall length minus the wheelbase. Typically, the rear overhang is larger on rear-wheel drive cars, while the front overhang is larger on front-wheel drive cars.[4] Journalist Paul Niedermeyer has proposed an overhang ratio, computed as .[5]
Obscuration band
Black graphite printed onto the glass to hide unsightly areas and improve aesthetics.

P

[edit]
1916 Studebaker phaeton
Phaeton
An open vehicle, usually with 4 doors, with a removable and/or retractable cloth top and a windshield characterized by the lack of integrated glass side windows. Contemporary uses of this name do not always follow this original description or apply to an open vehicle.
Labeled pillars
Pillar
A structural member that connects the roof to the body of the car. Pillars are usually notated from front to back alphabetically (e.g. the A-pillar joins the windshield to the frontmost side windows, the B-pillar is next to the front occupants' heads, etc.).
The angle of the A-pillar and the § dash-to-axle are related. An imaginary line extending from the base of the A-pillar and following its angle will pass in front of the front axle for most front-wheel drive and mid-engined cars, while it will pass through or behind the front axle for most rear-wheel drive cars. Pulling the A-pillar forward increases cabin volume, but the car will tend to assume a § one box shape and the A-pillar position may interfere with the driver's vision.[3]
The C-pillar usually is the last structural pillar in most § three box forms. Its angle and position defines the split between cargo volume and rear-seat passenger volume and headroom. In general, the base of the C-pillar is located over the rear wheel arch in most sedans (saloons) and coupes.[6]
US DOT Term: Means any structure, excluding glazing and the vertical portion of door window frames, but including accompanying molding, attached components such as safety belt anchorages and coat hooks, that (1) supports either a roof or any other structure (such as a roll-bar) above the driver's head or (2) is located along a side edge of a window.
Ford Taurus SHO, showing the windshield wiper plenum at the base of the windshield and the serpentine intake manifold of the Yamaha-designed V6 engine
Plenum
The area at the base of the windshield where the wipers are parked. Also refers to the main chamber in an intake manifold.
Volvo PV444 with ponton styling
Ponton styling
A 1930s–1960s design genre when distinct running boards and fully articulated fenders became less common and bodywork began to enclose the full width and uninterrupted length of a car in a markedly bulbous, slab-sided fashion.
Cadillac ELR plug-in hybrid electric vehicle recharging its traction battery through a SAE J1772 connector
Plug-in hybrid electric vehicle
A hybrid vehicle that can be plugged into the electric grid to recharge its battery to reduce gasoline usage.[7]
Mazda MX-5 (NC) with body (in white, left) removed to show chassis and powertrain
Powertrain
All the components that generate power and deliver it to the tyres.

Q

[edit]
Quarter-panel
(or rear quarter panel) refers to the panel at the back sides starting at the rear edge of the rearmost doors, bordered by at top by the trunk (boot) lid and at bottom by the rear wheel arches ending at the rear bumper. This is the opposite of the fender.
  • Literally, the term originally referred to the rear quarter or the car's length.

R

[edit]
Customized Chevrolet Bel Air hot rod with positive rake
Rake
The first application of the term rake in vehicles was probably the tilting back of the windshield's top.[citation needed] Nowadays rake refers to the angle between the overall vehicle and the horizontal axis of the ground. If the back is higher than the front, the vehicle is said to have positive rake; if the front is higher than the back, this is negative rake. In early hot rod and custom cars, positive rake was created by varying tire size, and/or by suspension modification. In today's body design, positive rake is integral in some vehicles' styling, e.g. Mercedes E350 sedan, circa 2012/13.
Jaguar XJ-S roadster
Roadster
An open vehicle, usually with 2 doors, with a removable and/or retractable cloth top and a windshield characterized by the lack of integrated glass side windows. Contemporary uses of this name do not always follow this original description. A classical roadster is a two-seater with a long hood and a short back, which means the driver is sitting in the rear of the vehicle (close to the rear axle). Usually it is a rear-wheel-driven car.
Alfa Romeo 75 with prominent extended body-colored rocker panels and fender flares
Rocker
The body section below the base of the door openings sometimes called the "rocker panels", or § sills.
Rocker rail
Body armor protecting the Rocker, found mostly in off-road vehicles. Term coined by engineers at MetalCloak.[citation needed]
Peugeot 405 with prominent black rubbing strips running horizontally along the sides
Rubbing strip
Plastic/rubber line or moulding to prevent side-swiping along the doors.

S

[edit]
Saab hockey stick C-pillar curve on Saab 900 hatch
Saab hockey stick
The hockey stick is an automotive design feature seen on nearly all Saab automobiles. It refers to the curve formed by the C-pillar in the rear corner at the base of the rear passenger window, which resembles the shape of an ice hockey stick or the Nike swoosh symbol.
Lamborghini Countach LP400 with scissor doors open
Scissor doors
(Lamborghini doors) are automobile doors that rotate vertically at a fixed hinge at the front of the door, rather than outward as with a conventional door.
Intake scoop on top of the hood of an AMC Rebel "The Machine"
Scoop
Inset or protrusion that implies the intake of air. May be functional for cooling/ventilation or purely ornamental. When mounted directly to the engine and allowed to protrude through the hood/bonnet, known as a shaker scoop as it vibrates in response to the throttle.
Scowling headlamps of the BMW M4 GTS
Scowling headlamps
Headlamps styled along a V-shape as viewed from the front, giving the impression of a scowl.
Scuttle
The part of the body on a convertible or roadster where the windscreen is mounted. The term is used primarily in the UK.
BMW M Coupe shooting-brake
Shooting-brake
Once a vehicle designed to carry hunters and sportsmen; now a station wagon or vehicle combining features of a station wagon and a coupe.
The shoulder line of a Volvo S80 (TS) extends from front to rear along the base of the greenhouse
Shoulder line
The line or "shoulder" formed by the meeting of top and side surfaces extending from hood/fender shoulder to boot-lid/quarter-panel shoulder. The strongest example of this feature can be found on more modern of Volvo Cars.
On lower trim levels of the BMW 3 Series (E36), the sill extensions below the door were left unpainted
Sill
The body section below the base of the door openings sometimes called the "rocker panels", or "rockers".
Sill line
Imaginary line drawn following the bottom edge of the greenhouse glass.
Six line
A line extending from the C-pillar down and around the rear wheel well.
Checker A-11 taxi featured sixthlights for the rear-seat passengers
Sixthlight
Also called quarter glass; fixed glass located in between the side-door and boot.
Alfa Romeo Spider with raised softtop
Softtop
A convertible top which is made out of flexible materials like PVC or textile.
Honda Insight used spats on the rear wheel to reduce aerodynamic drag
Spats
Side covers for wheel arches, hiding the wheel—usually rear only. Also called fender skirts.
The large spoiler of the Ford Sierra RS Cosworth once campaigned by Didier Auriol bisects the rear backlight
Spoiler
A raised lip or wing which is used to "spoil" unfavorable air movement across the body. Some designs are more functional than others.
Staggered wheel fitment
The front and rear wheels are different widths. On sporty rear-wheel-drive cars, the rear tires are usually wider than the front.
Prominent strakes on the side of the Ferrari 512TR extend onto the doors
Strake
Crease in the sheet metal intended as a "speed line" styling feature. Exemplified in the doors of the Ferrari Testarossa.
Lincoln Continental with front and rear suicide door open
Suicide door
Side doors hinged at the rear of the car with the latch at the front of the car. If accidentally opened while driving at a high speed, such doors would be blown backward.
1967 Plymouth GTX with pronounced swage line running fore and aft
Swage line
Crease or curvature in the side of the body used to create visual distinction. Sometimes the crease is functional and improves rigidity of the outer body (also known as character line).
Open swan door on an Aston Martin Rapide S
Swan doors
Swan doors operate in a similar way to conventional car doors but unlike regular doors, they open at an upward angle. These help to prevent the bottom edges of doors on low cars from scraping on curbs. Common on Aston Martin cars.
Swedish kiss
A negative flick-out to a flat surface which frames trim sections or venting.

T

[edit]
While wheelbase is measured axle-to-axle and generally does not change whether measured from the left or right side, track is measured wheel-to-wheel and may vary from front to rear
Track
The distance across the car between the base of the left and right wheels (like wheelbase, but side-to-side).
The Dodge Power Wagon truck was sold between 1945 and 1978
Truck
A typically large vehicle built using frame-on-rail construction consisting of a cab and a separate bed for cargo.
Car boot sales operate from the trunk or boot of an automobile
Trunk
(Boot in UK) Compartment for storage of cargo which is separate from the cab.
Range Rover Classic with a tube fender accessory protecting the front, replacing the bumper and carrying auxiliary lights and a winch
Tube Fender
Replacement fenders found on off-road vehicles designed as part of body armor for off-road vehicles. Used to protect the thin sheet metal bodies from damage while off-roading.
Illustration of tumblehome, comparing Audi Q7 with Fiat Ducato
Tumblehome
Refers to the way the sides of a car round inward toward the roof, specifically the sides of the greenhouse above the beltline. This term is borrowed from nautical description of marine vessels.
The Alfa Romeo Disco Volante has a pronounced turn under
Turn under
The shape of the rocker panel as it curves inward at the lower edge.

W

[edit]
The Lancia Stratos HF is considered wedge-positive
Wedge
Shape of the car as seen in the side profile. May be positive, negative or neutral. If the front is lower than the rear, then it is wedge-positive. If the rear is lower it is wedge-negative. If the car appears level from front to rear, then it is wedge neutral.
Gillig buses have an octagonal wheel arch as a signature styling detail
Wheel arch
The visible opening in the side of a car allowing access to the wheel. In some cases, the wheel arch is covered with wheel spats for a more formal appearance or aerodynamic considerations.
The wheel arch gap is pronounced on this Toyota 4Runner, to facilitate its intended off-road use
Wheel arch gap
The space between the tire and the wheel well. Currently there is a trend towards smaller wheel arch gaps. Sometimes referred to as Dead Cat Space due to the fact that, in winter, many domestic cats try to seek shelter in wheel wells of recently parked cars in an attempt to stay warm.
The wheelbase is measured from axle to axle
Wheelbase
The distance measured along the vehicle's length between the centrelines of each axle, which may be approximated from where the front and rear wheels meet the ground. Cars have typical proportions that have a wheelbase of approximately three wheel diameters (±14) between the wheels, giving a wheelbase that is approximately four times the outer diameter of the wheel and tire.[4]
This Willys MB has a circular rear wheel well and an angled one for the front
Wheel well (also wheelhouse, wheelhousing, or bucket)
The enclosure or space for the wheel.
The Fiat 124 has chrome windshield trim
Windshield trim
US DOT Term: Molding of any material between the windshield glazing and the exterior roof surface, including material that covers a part of either the windshield glazing or exterior roof surface.
The Lotus Seven series of cars has front wings that are not integrated into the body
Wings
UK term for § Fender.

See also

[edit]

References

[edit]
  1. ^ "Car Design Glossary - Part 2: One-Box (Monospace or Monovolume)". Car Design News. Archived from the original on 2013-12-03. Retrieved 2014-02-28.
  2. ^ Clarke, Adrian (2 November 2021). "Car Design Fundamentals: Dash to axle ratio". Hagerty. Retrieved 5 January 2023.
  3. ^ a b Clarke, Adrian (11 November 2021). "Car Design Fundamentals: The A-pillar". Hagerty. Retrieved 5 January 2023.
  4. ^ a b Clarke, Adrian (6 December 2021). "Car Design Fundamentals: Wheelbase, overhangs, and the crucial side view". Hagerty. Retrieved 4 January 2023.
  5. ^ Niedermeyer, Paul (June 22, 2013). "Design Analysis: Did The Lincoln Mark VI Have The Biggest Overhang Ratio Ever?". Curbside Classic. Retrieved 4 January 2023.
  6. ^ Clarke, Adrian (18 November 2021). "Car Design Fundamentals: The C-pillar". Hagerty. Retrieved 5 January 2023.
  7. ^ Romm, Joseph J.; Frank, Andrew A. (April 2006). "Hybrid Vehicles Gain Traction". Scientific American. Retrieved 28 February 2024.
[edit]