Jump to content

Styrene-butadiene

From Wikipedia, the free encyclopedia
(Redirected from Government Rubber-Styrene)
Styrene-butadiene
Identifiers
ECHA InfoCard 100.127.439 Edit this at Wikidata
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Styrene-butadiene or styrene-butadiene rubber (SBR) describe families of synthetic rubbers derived from styrene and butadiene (the version developed by Goodyear is called Neolite[1]). These materials have good abrasion resistance and good aging stability when protected by additives. In 2012, more than 5.4 million tonnes of SBR were processed worldwide.[2] About 50% of car tires are made from various types of SBR. The styrene/butadiene ratio influences the properties of the polymer: with high styrene content, the rubbers are harder and less rubbery.[3] SBR is not to be confused with the thermoplastic elastomer, styrene-butadiene block copolymer, although being derived from the same monomers.

Types

[edit]

SBR is derived from two monomers, styrene and butadiene. The mixture of these two monomers is polymerized by two processes: from solution (S-SBR) or as an emulsion (E-SBR).[4] E-SBR is more widely used.

Emulsion polymerization

[edit]

E-SBR produced by emulsion polymerization is initiated by free radicals. Reaction vessels are typically charged with the two monomers, a free radical generator, and a chain transfer agent such as an alkyl mercaptan. Radical initiators include potassium persulfate and hydroperoxides in combination with ferrous salts. Emulsifying agents include various soaps. By "capping" the growing organic radicals, mercaptans (e.g. dodecylthiol), control the molecular weight of the product. Typically, polymerizations are allowed to proceed only to ca. 70%, a method called "short stopping". In this way, various additives can be removed from the polymer.[3]

Solution polymerization

[edit]

Solution-SBR is produced by an anionic polymerization process. Polymerization is initiated by alkyl lithium compounds. Water and oxygen are strictly excluded. The process is homogeneous (all components are dissolved), which provides greater control over the process, allowing tailoring of the polymer. The organolithium compound adds to one of the monomers , generating a carbanion that then adds to another monomer, and so on. For tire manufacture, S-SBR is increasingly favored because it offers improved wet grip and reduced rolling resistance, which translate to greater safety and better fuel economy, respectively.[5]

Buna S

[edit]

The material was initially marketed with the brand name Buna S. Its name derives Bu for butadiene and Na for sodium (natrium in several languages including Latin, German, and Dutch), and S for styrene.[6][7][5] Buna S is an addition copolymer.

Properties

[edit]
Property S-SBR E-SBR
Tensile strength (MPa) 36 20
Elongation at tear (%) 565 635
Mooney viscosity, 100 °C 48.0 51.6
Glass transition temperature (°C) −65 −50
Polydispersity 2.1 4.5

Applications

[edit]
An SBR chain

Styrene-butadiene is a commodity material which competes with natural rubber. The elastomer is used widely in pneumatic tires. This application mainly calls for E-SBR, although S-SBR is growing in popularity. Other uses include shoe heels and soles, gaskets, and even chewing gum.[3]

Latex (emulsion) SBR is extensively used in coated papers, being one of the cheapest resins to bind pigmented coatings. In 2010, more than half (54%) of all used dry binders consisted of SB-based latexes.[8] This amounted for roughly 1.2 million tonnes.

It is also used in building applications, as a sealing and binding agent behind renders as an alternative to PVA, but is more expensive. In the latter application, it offers better durability, reduced shrinkage and increased flexibility, as well as being resistant to emulsification in damp conditions.

SBR is often used as part of cement based substructural (basement)waterproofing systems where as a liquid it is mixed with water to form the Gauging solution for mixing the powdered Tanking material to a slurry. SBR aids the bond strength, reduces the potential for shrinkage and adds an element of flexibility.

It is also used by speaker driver manufacturers as the material for low damping rubber surrounds.

Additionally, it is used in some rubber cutting boards.

SBR is also used as a binder in lithium-ion battery electrodes, in combination with carboxymethyl cellulose as a water-based alternative for, e.g. polyvinylidene fluoride.[9]

Styrene-butane rubber is also used in gasketed-plate heat exchangers. It is used at moderate temperature up to 85 deg C, (358 K) for aqueous systems.[10]

SBS Filaments[11] also exist for FDM 3D printing

History

[edit]

SBR is a replacement for natural rubber. It was originally developed prior to World War II in Germany by chemist Walter Bock in 1929.[12] Industrial manufacture began during World War II, and was used extensively by the U.S. Synthetic Rubber Program to produce Government Rubber-Styrene (GR-S); to replace the Southeast Asian supply of natural rubber which, under Japanese occupation, was unavailable to Allied nations.[13][14]

See also

[edit]

References

[edit]
  1. ^ Steven Di Pilla (2 June 2004), Slip and Fall Prevention: A Practical Handbook, CRC, p. 82, ISBN 978-0-203-49672-5
  2. ^ Market Study Synthetic Rubber "Marktstudie Synthetische Elastomere von Ceresana". Archived from the original on 2015-03-18. Retrieved 2013-08-23., published by Ceresana, June 2013
  3. ^ a b c Werner Obrecht; Jean-Pierre Lambert; Michael Happ; Christiane Oppenheimer-Stix; John Dunn; Ralf Krüger (2012). "Rubber, 4. Emulsion Rubber". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.o23_o01. ISBN 978-3527306732.
  4. ^ International Institute of Synthetic rubber Producers, Inc. (IISRP) article on S-SBR (retrieved 2011-12-02)
  5. ^ a b H.-D.Brandt et al. "Rubber, 5. Solution Rubbers" in Ullmann's Encyclopedia of Industrial Chemistry, 2012, Wiley-VCH, Weinheim. doi:10.1002/14356007.o23_o02
  6. ^ Mark Michalovic (2000) "The Story of Rubber. Germany: The Birth of Buna" from The Polymer Learning Center and Chemical Heritage Foundation
  7. ^ Evonik Industries Invention and Production of Buna
  8. ^ Holik, Herbert (2013). Holik, Herbert (ed.). Handbook of Paper and Board. Wiley-VCH Verlag GmbH & Co. p. 250. doi:10.1002/9783527652495. ISBN 9783527331840.
  9. ^ "Water based anode binder | JSR Micro NV". Archived from the original on 2016-03-25.
  10. ^ K., Sinnott, R. (2009). Chemical engineering design. Towler, Gavin. (5th ed., SI ed.). Oxford: Butterworth-Heinemamn. ISBN 978-0-7506-8551-1. OCLC 774295558.{{cite book}}: CS1 maint: multiple names: authors list (link)
  11. ^ "SBS PLUS - SA FILAMENT".
  12. ^ Malcolm Tatum What is syrene-butadiene rubber from Wisegeek
  13. ^ Wendt, Paul (1947). "The Control of Rubber in World War II". Southern Economic Journal. 13 (3). Southern Economic Association: 203–227. doi:10.2307/1053336. JSTOR 1053336.
  14. ^ "Rubber Matters: Solving the World War II Rubber Problem & Collaboration". Chemical Heritage Foundation. Archived from the original on December 5, 2014. Retrieved 24 June 2013.