Jump to content

4,7-Dichloroquinoline

From Wikipedia, the free encyclopedia
4,7-Dichloroquinoline
Names
Preferred IUPAC name
4,7-Dichloroquinoline
Identifiers
3D model (JSmol)
ChEMBL
ChemSpider
ECHA InfoCard 100.001.559 Edit this at Wikidata
EC Number
  • 201-714-7
UNII
  • InChI=1S/C9H5Cl2N/c10-6-1-2-7-8(11)3-4-12-9(7)5-6/h1-5H checkY
    Key: HXEWMTXDBOQQKO-UHFFFAOYSA-N checkY
  • c1cc2c(ccnc2cc1Cl)Cl
Properties
C9H5Cl2N
Molar mass 198.05 g·mol−1
Appearance White powder
Melting point 87 °C (189 °F; 360 K)
Boiling point 317 °C (603 °F; 590 K)
Hazards
GHS labelling:[1]
GHS07: Exclamation mark GHS09: Environmental hazard
Warning
H315, H317, H319, H335, H411
P261, P264, P271, P272, P273, P280, P302+P352, P304+P340, P305+P351+P338, P312, P321, P332+P313, P333+P313, P337+P313, P362, P363, P391, P403+P233, P405, P501
Flash point 164 °C (327 °F; 437 K)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

4,7-Dichloroquinoline is a two-ring heterocyclic compound used as a chemical intermediate to aminoquinoline antimalarial drugs including amodiaquine, chloroquine and hydroxychloroquine.

Synthesis

[edit]

4,7-Dichloroquinoline was first reported in a patent filed by IG Farben in 1937.[2] However, its synthesis was not investigated in detail until chloroquine was developed as an antimalarial drug.[3]: 130–132  A route to the intermediate starting from 3-chloroaniline was developed by chemists at Winthrop Chemical Co.[4]

The substituted aniline is condensed with the diethyl ester of oxaloacetic acid under mildly acidic conditions, forming an imine, which is cyclised to form the pyridine ring by heating in mineral oil. Hydrolysis and decarboxylation follows, before the hydroxy group in the 4-position is converted into the second chloro group using phosphoryl chloride.[4]

The availability of 4,7-dichloroquinoline allowed alternative structural analogs of the 4-aminoquinoline type to be investigated, leading to the discovery of hydroxychloroquine in 1949.[5][6] By that time, chloroquine manufacturing processes had been established to allow its widespread use.[7] 4,7-Dichloroquinoline has also been prepared by the Gould–Jacobs reaction using an alternative method of constructing the pyridine ring from 3-chloroaniline.[8]

Reactions

[edit]

The chlorine atom in the 4-position in the pyridine ring is much more reactive in nucleophilic aromatic substitution reactions[9] than the chlorine in the benzene ring. As a result, it can be replaced selectively to form derivatives at that position. A typical reaction with a specific primary amine gives chloroquine in high yield:[6][7]

Uses

[edit]

Apart from its use in the manufacture of antimalarials already described, 4,7-dichloroquinoline is of continuing interest as an intermediate to new drug candidates.[10][11]

References

[edit]
  1. ^ PubChem Database. "4,7-Dichloroquinoline".
  2. ^ DE patent 683692, Andersag, Hans; Breitner, Stefan & Jung, Heinrich, "Process for the preparation of quinoline compounds containing amino groups with basic substituents in the 4-position", issued 1939-11-13, assigned to IG Farbenindustrie AG 
  3. ^ Institute of Medicine (US) Committee on the Economics of Antimalarial Drugs; Arrow, K. J.; Panosian, C.; Gelband, H. (2004). Arrow, K.J.; Panosian, C.B.; Gelband, H. (eds.). Saving lives, buying time : economics of malaria drugs in an age of resistance. National Academies Press. doi:10.17226/11017. ISBN 9780309092180. PMID 25009879.
  4. ^ a b Surrey, Alexander R.; Hammer, Henry F. (1946). "Some 7-Substituted 4-Aminoquinoline Derivatives". Journal of the American Chemical Society. 68: 113–116. doi:10.1021/ja01205a036. PMID 21008327.
  5. ^ US patent 2546658, Surrey, Alexander R, "7-chloro-4-[5-(N-ethyl-N-2-hydroxyethylamino)-2-pentyl] aminoquinoline, its acid addition salts, and method of preparation", issued 1951-03-27, assigned to Sterling Drug Inc. 
  6. ^ a b Surrey, Alexander R.; Hammer, Henry F. (1950). "The Preparation of 7-Chloro-4-(4-(N-ethyl-N-β-hydroxyethylamino)-1- methylbutylamino)-quinoline and Related Compounds". Journal of the American Chemical Society. 72 (4): 1814–1815. doi:10.1021/ja01160a116.
  7. ^ a b Kenyon, R.L.; Wiesner, J.A.; Kwartler, C.E. (1949-04-01). "Chloroquine manufacture". Industrial & Engineering Chemistry. 41 (4): 654–662. doi:10.1021/ie50472a002.
  8. ^ Price, Charles C.; Roberts, Royston M. (1948). "4,7-Dichloroquinoline (Quinoline, 4,7-dichloro-)". Organic Syntheses. 28: 38. doi:10.15227/orgsyn.028.0038; Collected Volumes, vol. 3, p. 272.
  9. ^ Rohrbach, Simon; Smith, Andrew J.; Pang, Jia Hao; Poole, Darren L.; Tuttle, Tell; Chiba, Shunsuke; Murphy, John A. (2019). "Concerted Nucleophilic Aromatic Substitution Reactions". Angewandte Chemie International Edition. 58 (46): 16368–16388. doi:10.1002/anie.201902216. PMC 6899550. PMID 30990931.
  10. ^ Raj, Raghu; Land, Kirkwood M.; Kumar, Vipan (2015). "4-Aminoquinoline-hybridization en route towards the development of rationally designed antimalarial agents". RSC Advances. 5 (101): 82676–82698. Bibcode:2015RSCAd...582676R. doi:10.1039/C5RA16361G.
  11. ^ Janeba, Zlatko (2015). "Development of Small-Molecule Antivirals for Ebola". Medicinal Research Reviews. 35 (6): 1182. doi:10.1002/med.21355. PMC 7168439. PMID 26172225.

Further reading

[edit]
  • Slater, Leo (9 January 2009). War and Disease: Biomedical Research on Malaria in the Twentieth Century. Rutgers University Press. ISBN 9780813546469.