Austin 7
Austin 7 | |
---|---|
Austin Seven 1922 | |
Overview | |
Manufacturer | Austin |
Production | 1923–1939 290,000 |
Body and chassis | |
Class | Economy car |
Body style | 2-door tourer 2-door saloon 2-door cabriolet 2-door coupe 3-door van |
Powertrain | |
Engine | 747 cc straight-4 |
Dimensions | |
Wheelbase | 75 inches (1.9 m) |
Chronology | |
Predecessor | None |
Successor | Austin 8, Austin Big 7 |
The Austin 7 is an economy car that was produced from 1923 until 1939 in the United Kingdom by Austin. It was nicknamed the "Baby Austin" and was at that time one of the most popular cars produced for the British market and sold well abroad. Its effect on the British market was similar to that of the Model T Ford in the US, replacing most other British economy cars and cyclecars of the early 1920s.[1] It was also licensed and copied by companies all over the world.[2] The first BMW car, the BMW Dixi, was a licensed Austin 7. In France they were made and sold as Rosengarts, and in the United States they were built by the American Austin Car Company. In Japan, Nissan also used the 7 design as the basis for their first cars, although not under licence.[2] This eventually led to a 1952 agreement for Nissan to build and sell Austins (which were now being made under the British Motor Corporation) in Japan under the Austin name.
Many Austin 7s were rebuilt as "specials" after the Second World War,[3][4][5] including the first race car built by Bruce McLaren, and the first Lotus, the Mark I. Companies such as Speedex in Luton thrived in the late 1950s by producing race-proven bodies and engine parts for the Seven chassis.
Such was the power of the Austin 7 name that the company re-used it for early versions of the A30 in 1951[6] and Mini in 1959.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/d/d1/Austin7_grill.png/220px-Austin7_grill.png)
History
![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/62/Austin_Seven_Saloon_1931.jpg/220px-Austin_Seven_Saloon_1931.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/4/4a/Dalai_Lama%27s_Baby_Austin_car.jpg/220px-Dalai_Lama%27s_Baby_Austin_car.jpg)
Until the First World War, Austin built mainly large cars, but in 1909 they sold a single-cylinder small car built by Swift of Coventry called the Austin 7 hp.[7] After this they returned to bigger cars.[citation needed]
In 1920 Sir Herbert Austin commenced working on the concept of a smaller car, mainly to meet the needs of young families aspiring to own an affordable motor car. This idea was spurred on by the introduction of the Horsepower Tax in 1921. His design concept marked a departure from his company's conservative motoring past and Austin received considerable opposition from his board of directors and creditors. Because the company was in receivership, Austin decided to carry out the project himself, and in 1921 hired an 18-year-old draughtsman, Stanley Edge, from the Austin factory at Longbridge, Birmingham to aid in the drawing of detailed plans. This work was carried out in the billiard room of Austin's Lickey Grange home.[citation needed]
Edge later claimed to have convinced Austin to use a small four-cylinder engine. The original side valve engine design featured a capacity of 696cc (55mm x 77mm) giving a RAC rating of 7.2 hp, the cast cylinder block featured a detachable head and was mounted on an aluminium crankcase. The crankshaft used one roller and two ball bearings and the big-ends were splash lubricated.[8] Edge also later claimed to have carried out the design of other mechanical components such as the three speed gearbox and clutch assembly. Austin was largely responsible for styling the Seven's design, which was reportedly[citation needed] influenced by the design of the Peugeot Quadrilette. The "A" frame chassis design was believed to have been influenced by the design of an American truck used in the Longbridge factory in the early 1920s.[citation needed]
The design was completed in 1922 and three prototypes were constructed in a special area of the Longbridge factory, and announced to the public in July 1922.[8] Austin had put a large amount of his own money into the design and patented many of its innovations in his own name. In return for his investment he was paid a royalty of two guineas (£2, 2s), (£2.10) on every car sold.[2]
Nearly 2,500 cars were made in the first year of production (1923), not as many as hoped, but within a few years the "big car in miniature" had wiped out the cyclecar industry and transformed the fortunes of the Austin Motor Co. By 1939 when production finally ended, 290,000 cars and vans had been made.[8]
Chassis
The Austin 7 was considerably smaller, at 3/4 size, than the Ford Model T. The wheelbase was only 75 in (1.91 m), and the track only 40 inches (1.02 m). Equally, it was lighter – less than half the Ford's weight at 794 pounds (360 kg). The engine required was thus also modest – the small 747 cc sidevalve with an actual 10 hp output gave adequate performance.
The chassis took the form of an "A" with the engine mounted between the channel sections at the narrow front end. The rear suspension was by quarter elliptic leaf springs, cantilevered from the rear of the chassis, while at the front a beam axle had a centrally mounted transverse semi-elliptic leaf spring.[8]
Steering is by worm and wheel mechanism.
The Austin 7 had brakes on all four wheels from the start, but initially the footbrake only operated the rear wheel brakes, while the front brakes worked via the handbrake. From 1930, the Austin's front and rear brakes became fully coupled.
In late 1931 the chassis was lengthened by 6" with a corresponding increase in the rear track.
Engine and transmission
![](http://upload.wikimedia.org/wikipedia/commons/thumb/c/cd/Thinktank_Birmingham_-_Austin%283%29.jpg/170px-Thinktank_Birmingham_-_Austin%283%29.jpg)
The original 1922 four-cylinder Austin Seven engine had a bore of 2.125 in (54.0 mm) and stroke of 3 in (76 mm), giving a capacity of 696 cc and RAC rating of 7.2 hp. From March 1923 the bore was increased to 2.2 in (56 mm) giving 747 cc and 10.5 hp.[8] The side-valve engine was composed of an aluminium crankcase, cast iron cylinder block and cast iron cylinder head. Cooling was by thermosiphon, without a water pump, and the dynamo was driven from the timing gears.
The big end bearings were lubricated by jets from an oil gallery in the crankcase, the oil striking the crankshaft webs which were drilled accordingly. Originally the journal diameter was 1.125"; this was later increased to 1.3125". The three bearing engine (from 1936) used a white metal centre bearing.
The splash-lubricated crankshaft (pressure fed on some sports models) at first ran in two bearings (two ball bearings at the front, roller at the back) changing to three in 1936.[8] An electric starter was fitted from November 1923. The early cars used magneto ignition, but this was changed to coil in 1928.
The 3-speed and reverse gearbox was bolted to the back of the engine and had a variety of ratios depending on the application: touring, sports, racing and trials. A four-speed gearbox was introduced in 1932 and in 1933 synchromesh was added to third and top ratios extending to second gear in 1934.[8]
The back axle was of spiral bevel type with ratios between 4.4:1 and 5.6:1 with 4.9:1 being the most common until the 1930s. A short torque tube ran forward from the differential housing to a bearing and bracket on the rear axle cross member.
Reliant used a derivative of the Austin Seven engine for their early three-wheelers, before developing a new aluminium alloy engine (used as the replacement for the Austin Seven engine by the 750 Motor Club in their Formula 750 motor sport) introduced in the 1962 Reliant Regal 3/25.
Gordon England
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/06/1926_Austin_7_GE_Brooklands_Replica_3926178863.jpg/220px-1926_Austin_7_GE_Brooklands_Replica_3926178863.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/7/7b/1928_Austin_7_GE_Sunshine_Saloon_1.1.jpg/220px-1928_Austin_7_GE_Sunshine_Saloon_1.1.jpg)
Herbert Austin's son-in-law, Arthur Waite, soon began to achieve remarkable sporting successes beginning at Brooklands in March 1923 and the next month at Monza. Another driver, E C Gordon England, persuaded Sir Herbert to provide him with a racing 7. Waite and Lou Kings (chief tester) then experienced a run of failure brought about by inadequate engine lubrication for racing conditions. Meanwhile, Gordon England, flushed with success from establishing six new class records at Brooklands, had built a special lightweight 2-seater body weighing just 20 lb (9.1 kg) and entered it in the 1100 cc class for the Junior Car Club 200 mile race at Brooklands in October 1923. There England finished in second place and during the race won another five class records.[9]
As a result, two new sports models were offered by Austin in January 1924, the Sports and the Brooklands Super-sports. The Brooklands Super-sports was a replica of England's record-breaker. Each car was sold with a Brooklands certificate proving a speed of 80 miles 0 chains (80.00 miles, 128.75 km) per hour. By 1925 Gordon England held nineteen 750 cc class records.[9]
Austin Seven saloon by Gordon England
The first Austin 7 saloon was made by England's coachbuilding company. England had been an aircraft designer with Bristol Gordon England biplanes. His fabric saloon body based on aircraft principles was said to be the smallest closed car in the world. Its body weighed 28 lb (13 kg) less than the tourer and at £210, almost double the £112 chassis price. It showed there would be a market for an Austin-made steel-panelled saloon which was introduced in September 1926 at £165[9] (equivalent to £12097 today)
Until fabric bodies fell from fashion in the early 1930s the Gordon England Fabric "de luxe" Saloon remained in Austin's catalogue at a £20 (14%) premium over Austin's standard steel saloon. It was accompanied by their 2-seater Gordon England Cup Model.[10]
Austin Seven Swallow
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/59/Austin_7_Swallow_1931.jpg/220px-Austin_7_Swallow_1931.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/b0/1931_Austin_Seven_Swallow_Heritage_Motor_Centre%2C_Gaydon.jpg/220px-1931_Austin_Seven_Swallow_Heritage_Motor_Centre%2C_Gaydon.jpg)
In 1927, William Lyons, co-founder of the Swallow Sidecar Company (after WW II Jaguar Cars), saw commercial potential in producing a re-bodied Austin 7. Buying a chassis from dealer Parkers of Bolton Lyons commissioned Swallow's talented employee, coachbuilder Cyril Holland, to produce a distinctive open tourer: the Austin Seven Swallow. Holland (1895-1983) who joined Swallow in late 1926 had served his apprenticeship with Lanchester and would become chief body engineer.[11][12] The height of saloon car fashion of the day was to have the back of the body fully rounded, this was called "dome" shaped.
With its bright two-tone colour scheme and a style befitting more expensive cars of the time, together with its low cost (£175), the Swallow proved popular and was followed in 1928 by a saloon version: the Austin Seven Swallow Saloon.
Approximately 3,500 bodies of various styles were produced up until 1932, when Lyons started making complete cars under the SS cars marque.
Such was the demand for the Austin Seven Swallows that Lyons was forced to move in 1928 from Blackpool to new premises in Coventry. It was, in part, the success of the Swallows that laid the foundations of what was to become, by 1945, Jaguar Cars.[13][14]
Licensed production
Versions of the Austin 7 were made under licence by American Austin from 1930, Dixi (later bought by BMW) in Germany from 1927 and Rosengart in France from 1928. Austin 7s were also manufactured by Nissan (Datsun) but reports differ as to whether these were built under licence or were unlicensed copies.[citation needed] In addition, rolling chassis were exported to Australia to have locally made bodies attached.
-
US
American Bantam 1939 -
Japan
Nissan (Datsun) 16 1937 -
Germany
BMW 3/15 1930 -
France
Rosengart LR4 1928 -
Austin Seven 1936
American Austin, American Bantam, and Jeep
The American Austin Car Company was founded in 1929, in Butler, Pennsylvania, in premises that had belonged to the Standard Steel Car Company.[7] Their intention was to assemble and sell in the United States a version of the Austin 7 car, called American Austin.[15] After some initial success the Great Depression set in, and sales fell off to the point that production was suspended. In 1934 the company filed for bankruptcy.
The automobile was designed in the hopes of creating a market for small-car enthusiasts in the United States. The cars had 747 cc (45.6 cu in) inline-four engines, enabling the car to return 40 mpg‑US (48 mpg‑imp; 5.9 L/100 km), and travel 1,000 miles or 1,600 kilometres per 2 US qt (1.7 imp qt; 1.9 L) fill of oil.
Australian-bodied Austin Sevens
In the aftermath of World War I the Australian Government imposed a tariff on imported vehicles, with tax concessions applying to rolling chassis, as a stimulus to develop a sovereign motor vehicle industry. The chassis concession acted as a financial incentive for local coach-builders to import factory built rolling chassis, and fit uniquely Australian designed and built bodies, leading to the establishment of an Australian motor vehicle bodybuilding industry in the early 1920s.
The largest and best known of these Australian coach-builders was Holden's Motor Body Builders. Holden built Australian-bodied Austin Seven tourer and roadster models from the mid-1920s.
However, several smaller coach-builders built limited numbers of Australian-bodied Austin Seven sports models between 1924 and 1934. Some examples of these Australian-bodied sports models are; the Standard Sports, built by Flood Motor Body Works, St Kilda Road, Melbourne; the Wasp built by William Green, Parramatta Road, Petersham, Sydney; the Moth built by Geo Sykes, Gordon Road, Chatswood, Sydney; the Comet built by Bill Conoulty, Sydney; and the Meteor. The Meteor was built by several coach-builders (Flood Motor Body Works, St Kilda Road, Melbourne; Jack Lonzar, Kent Town Adelaide; and A Robinson & Co., 181 Castlereagh St, Sydney), with individual variations to the common design.
Layout
In 2007, during an episode of Top Gear, Jeremy Clarkson and James May studied a number of early car designs (including the Ford Model T and the De Dion-Bouton Model Q) and concluded that the Austin Seven was the first mass-market car to be fitted with a "conventional" control layout, as found on modern cars (although the earliest car they found to use this layout was a Cadillac Type 53 in 1916).
Body styles
Tourers
![](http://upload.wikimedia.org/wikipedia/commons/thumb/c/c8/Austin_Seven_Chummy_Tourer_1929.jpg/220px-Austin_Seven_Chummy_Tourer_1929.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/53/1934_Austin_7_two_seater.jpg/220px-1934_Austin_7_two_seater.jpg)
Type | Name | Description | From | To |
---|---|---|---|---|
XL | prototypes | 1922 | ||
AB | Aluminium-bodied four-seater | 1922 | 1924 | |
AC | 1924 | 1926 | ||
AD | Four seater | 1926 | 1929 | |
AE | Four seater. Two inches wider than AD | 1929 | 1929 | |
Two seater | 1929 | 1930 | ||
AF | Steel-bodied four-seater | 1930 | 1932 | |
AH | Pressed-steel body. Four seater | 1932 | ||
AAK | Open road Tourer | Cowled radiator | 1934 | |
AH | Pressed-steel body. Four seater | 1932 | ||
PD | Two seater | 1934 | ||
APD | Opal | Two seater | 1934 | 1936 |
AAL | Open Road Tourer | Covered spare wheel | 1935 | |
AH | Pressed-steel body. Four seater | 1932 | ||
APE | New Opal | Two seater | 1936 |
Saloons
![](http://upload.wikimedia.org/wikipedia/commons/thumb/8/81/Austin_Seven_Box_Saloon_1933.jpg/220px-Austin_Seven_Box_Saloon_1933.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/67/Austin_Seven_New_Ruby_Saloon.jpg/220px-Austin_Seven_New_Ruby_Saloon.jpg)
Type | Name | Description | From | To |
---|---|---|---|---|
R | Aluminium or fabric saloon | 1926 | 1927 | |
RK | Aluminium or fabric saloon | 1927 | ||
RL | Steel saloon | 1930 | ||
RG | Fabric saloon | 1930 | ||
RN | Long-wheelbase steel saloon | |||
RP | 1932 | |||
ARQ | Ruby | Saloon | 1934 | |
ARR | "New" Ruby | Saloon | 1936 | 1939 |
Cabriolet
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/27/Austin_Seven_Pearl_Cabriolet_1935.jpg/220px-Austin_Seven_Pearl_Cabriolet_1935.jpg)
Type | Name | Description | From | To |
---|---|---|---|---|
AC | Pearl | Cabriolet version of ARQ Ruby. | 1934 | |
ACA | "New" Pearl | Cabriolet version of ARR New Ruby. | 1936 |
Sports
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/0c/Austin_Seven_Ulster_2-Seater_Sports_1930.jpg/220px-Austin_Seven_Ulster_2-Seater_Sports_1930.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/af/Austin_Seven_65_Nippy_2-Seater_Sport_1933.jpg/220px-Austin_Seven_65_Nippy_2-Seater_Sport_1933.jpg)
Type | Name | Description | From | To |
---|---|---|---|---|
50 mph | Aluminium bodied. Long tail | 1926 | ||
E Super Sports | Aluminium bodied. No doors | 1927 | 1928 | |
EA Sports | Ulster | Aluminium bodied. No doors | ||
EB 65 | 65 | Aluminium body, steel wings. Rounded tail. | 1933 | 1934 |
AEB | Nippy | All steel | 1934 | 1937 |
EK 75 | Speedy | Aluminium body. Pointed tail. | ||
AEK | Speedy | Redesignation of EK 75 | 1935 |
The Ulster gained its name from a strong performance in the 1929 RAC Tourist Trophy held at the Ards circuit in County Down, where Archie Frazer-Nash finished third and S. V. Holbrook finished fourth.
Coupés
Type | Name | Description | From | To |
---|---|---|---|---|
Type B | Upper body fabric. | 1928 | 1931 |
Vans
Type | Name | Description | From | To |
---|---|---|---|---|
AB, AC and AD | Converted tourer | 1923 | 1927 | |
AE | 1929 | 1930 | ||
RK | Converted RK saloon | |||
RM | Converted RL saloon | |||
RN | Converted RN saloon | |||
RP | Converted RP saloon | 1933 | ||
AVH | ||||
AVJ and AVK | Converted Ruby | 1939 |
Motorsport
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/22/Austin_7_of_Arthur_Waite.jpg/220px-Austin_7_of_Arthur_Waite.jpg)
In Australia Arthur Waite won the 1928 100 Miles Road Race driving an Austin 7. C E A Westcott did win the 1936 RAC Rally.
References
- ^ Baldwin, N. (1994). A-Z of Cars of the 1920s. Bay View Books. ISBN 1-870979-53-2.
- ^ a b c d Mills, Rinsey (1996). Original Austin Seven. Bay View Books. ISBN 1-870979-68-0.
- ^ "Classic Motor Monthly: The Super Accessories". Classicmotor.co.uk. 27 December 1998. Archived from the original on 21 June 2012. Retrieved 23 June 2012.
- ^ "The Austin Seven Special". Pasttimesproject.co.uk. Retrieved 23 June 2012.
- ^ "Austin 7 Special". Tanygraig.force9.co.uk. Archived from the original on 21 March 2007. Retrieved 23 June 2012.
- ^ Robson, Graham (2006). A-Z British Cars 1945–1980. Herridge & Sons. ISBN 0-9541063-9-3.
- ^ a b Georgano, N. (2000). Beaulieu Encyclopedia of the Automobile. London: HMSO. ISBN 1-57958-293-1.
- ^ a b c d e f g Cheetham, Craig (2004). Vintage Cars - The Finest Prewar Automobiles. Rochester, United Kingdom: Grange Books. p. 33. ISBN 1840136359.
- ^ a b c Wyatt, R J (1981). The Austin 1905—1952. David & Charles, Newton Abbott. ISBN 0-7153-7948-8.
- ^ Display advertising—Austin. The Times, Tuesday, 20 Mar 1928; pg. xliv; Issue 44846.
- ^ Swallow. Automobile Quarterly p1939 volume 18, issue 4 1980
- ^ Brian Long Daimler V8 SP250 Veloce, p90, 2008, ISBN 9781904788775
- ^ Sedgwick, M. (1989). A–Z of Cars of the 1930s. Bay View Books. ISBN 1-870979-38-9.
- ^ "Jaguar History: Swallow Sidecar Company". Archived from the original on 30 June 2007. Retrieved 18 July 2007.
- ^ "First American Midget Car Runs At High Speed". Popular Mechanics. 53 (3): 368. September 1930. Retrieved 12 April 2015.
External links
![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
- The Austin Seven Clubs' Association Details of the various Austin 7 member clubs throughout the UK and the rest of the world. Also the Austin 7 Archives and Register of surviving cars.
- The Pre-War Austin 7 Club The largest club purely for the Austin Seven.
- A7 Components Spare parts for all models of Austin 7.
- Austin Seven Owners Club A meeting place for owners of Austin Sevens or those interested in old cars in London and the Home Counties.
- Austin Seven Special Register The Register for Austin 7 based Specials.
- Autocar re-tests an Austin 7
- Austin 7 racers at AustinMemories.com