Jump to content

Cut-away

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 70.162.235.225 (talk) at 05:46, 22 November 2019 (→"Mountain Dew" Incident: no sources). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

For other uses, see Cutaway (disambiguation).

Cut-away is a skydiving term referring to disconnecting the main parachute from the harness-container in case of a malfunction in preparation for opening the reserve parachute. The 3-ring release system on parachutes allows a rapid cut-away in the event of an emergency.

Cutaway is also the title of a 2000 action film about skydiving.

Modern skydiving harness-containers have two containers; one for the main parachute, and another one for the reserve. These containers are built into a single "backpack", with the reserve container above the main. In case the main parachute malfunctions, it is necessary to jettison the main before deploying the reserve to avoid a main-reserve entanglement. This act of jettisoning the main is called a "cut-away".

Over the years, several different devices have been designed for cutting away the main. Among the most popular were variations of the Capewell release system, until in the 1970s, Bill Booth invented the 3-ring release. Variations of the 3-ring release can now be found on practically all sport and military free fall parachutes.

Cutting away with the 3-ring release is done by pulling a handle placed on the main lift web of the harness. In some cases, parts of the malfunctioning main parachute may be tangled with the skydiver, in which case it may be necessary to use a hook knife to literally cut away the main.

Retrieved from "https://en.wikipedia.org/w/index.php?title=Cut-away&oldid=927391029"