Crane (machine)

An tower crane with a pivotted main boom

A crane is a tower or derrick equipped with cables and pulleys that is used to lift and lower materials. Cranes are commonly used in the construction industry and in manufacturing heavy equipment. Construction cranes are usually temporary structures, either fixed to the ground or mounted on a purpose-built vehicle.

Types of cranes

Ancient cranes

A modern reconstruction of a medieval crane design. Cranes like this were used to build Europe's cathedrals in the middle ages. The crane would be fixed on top of a wall as it was being constructed and was powered by men running inside the two large wheels.

Mobile crane

The most basic type of crane consists of a steel latticework boom mounted on a mobile platform. The boom is hinged at the bottom, and can be raised and lowered by cables. A hook is suspended from the top of the boom by cables and pulleys. The cables are operated by electric motors (although in old cranes they were operated by clutches driven by the crane's internal combustion engine). This type of crane is easily converted to a demolition crane by adding a demolition ball, or to an earthmover by adding a bucket.

Telescopic crane

This is a type of mobile crane whose boom consists of a number of square tubes fitted one inside the other. When the crane is deployed on site, an hydraulic mechanism extends the tubes to increase the working height.

Tower crane

Fixed to the ground, this type gives best combination of height and lifting capacity and is used in the construction of tall buildings. To save space, the vertical part of the crane is often built in a well in the centre of the building, which is then converted to a lift (elevator) shaft when the crane is dismantled. A horizontal boom is balanced asymmetrically across the top of the tower. In the case of very tall buildings the tower crane will often jack itself up taller as the building is constructed. Its short arm carries a counterweight of concrete blocks, and its long arm carries the lifting gear. The crane operator sits in a cabin at the top of the tower.

A tower crane is usually assembled by a telescopic crane of smaller lifting capacity but greater height, and in the case of tower cranes that have risen while constructing very tall skyscrapers a smaller crane will sometimes be lifted to the roof of the completed tower to dismantle the tower crane afterward. A self-assembling tower crane has been demonstrated, which lifts itself off the ground using jacks, allowing the next section of the tower to be inserted at ground level.

Loader crane

This is an hydraulically-powered articulated arm fitted to a trailer, used to load goods onto the trailer. The numerous jointed sections can be folded into a small space when the crane is not in use. One of the sections may be telescopic. A well-known manufacturer of loader cranes is the Swedish company Hiab (Hydrauliska Industri AB).

Gantry crane

This is a large installation used in container ports and rail freight terminals. The lifting mechanism is mounted on a cross-beam supported on vertical legs which run on rails. de crane can move very heavy loads.

Overhead crane

This type of crane is usually seen in a manufacturing facility, and some of them can lift very heavy loads. The winch is mounted on a trolley which moves in one direction along one or two beams. The beams can move in the orthogonal direction along elevated tracks, often mounted along the side of an assembly area.

Stacker crane

A crane with a forklift type mechanism used in automated (computer controlled) warehouses (known as an automated storage and retrieval systems (AS/RS)). The crane moves on a track in an aisle of the warehouse. The fork can be raised or lowered to any of the levels of a storage rack and can be extended into the rack to store and retrieve product. The product can in some cases be as large as an automobile. Stacker cranes are often used in the large freezers warehouses used by manufacturers of frozen foods. This avoids requiring forklift workers to work in well below freezing temperatures every day.

Floating crane

Floating cranes are used mainly in bridge building and port construction, but they are also used for occasional loading and unloading of especially heavy or awkward loads on and off ships. Some specialized crane barges have a lifting capacity exceeding 10,000 tons and have been used to transport entire bridge sections. Floating cranes have also been used to salvage sunken ships.