Jump to content

Dinky Toys

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Dinkycollect (talk | contribs) at 08:25, 30 May 2024. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Dinky
Dinky logo used in the late 1960s
Product typeScale model vehicles
OwnerMattel (1997–)
CountryU.K.
Introduced1934; 90 years ago (1934) in Liverpool
Related brandsList of model car brands
MarketsWorldwide
Previous owners

Dinky Toys was the brand name for a range of die-cast zamak zinc alloy scale model vehicles, traffic lights, and road signs produced by British toy company Meccano Ltd. They were made in England from 1934 to 1979, at a factory in Binns Road in Liverpool.

Dinky Toys were among the most popular die-cast vehicles ever made – pre-dating other popular die-cast marques, including Corgi, Matchbox and Mattel's Hot Wheels.[1][2]

Vehicles commercialised under the "Dinky" name include cars, trucks, aircraft, military, ships.

Pre-war history

Dinky 23e model of George Eyston's land record car, "Speed of the Wind". The toy was made from 1936 to 1956.

Frank Hornby established Meccano Ltd. in 1908 to make metal construction sets. The company later moved into model railways, with its O gauge clockwork trains appearing in 1920.[3][4]

In the early 1930s, Meccano made many types of tinplate and other metal cars, such as its Morgan and BSA three-wheelers, mostly in kit form.[5] In 1933, Meccano Ltd issued a series of railway and trackside accessories to complement its O gauge (1/45) Hornby Trains model railway sets.[6][7] The accessories were first called "Hornby Modelled Miniatures", but in the April 1934 issue of Meccano Magazine, they were given the name "Meccano Dinky Toys" for the first time.[8] In August 1935, the name Meccano was dropped and the marque became DINKY TOYS, which lasted until 1971.[9][page needed] By December 1934, the Dinky name was also used for the "Dinky Builder" sets, which were coloured flat metal pieces that could be hinged together to make buildings and vehicles.

One story about the origin of the "Dinky" name is that it derived from a nickname that a friend gave to Frank Hornby's daughter.[10] Another version is that when one of Hornby's daughters-in-law first saw the models, she called them "dinky", a Scottish word meaning "neat" or "fine".[citation needed]

The legacy of vehicles

RAC hut and motorcycle patrol, to O scale, which was about 1:43

In the mid-1930s, six vehicles were released (designated 22a through f), including a sports car, a sports coupe, a truck, a delivery van, a farm tractor, and a tank, all cast in lead. Soon after, the first Dinky model car, a sports car based on the MG Magic Midget, was made available individually, numbered 23. At that time, a series 24 (a-h) was introduced, which included a generic ambulance (made until the late 1940s), a grand sport open four-seater, a grand sport two-seater, a coupe and a limousine.[11] The 24 series was also made in France.

Some smaller vehicles were produced alongside model track workers, passengers, station staff and other O scale trackside accessories.[8] All of the early cars were inaccurate representations and had die-cast metal bodies and chassis, and wheels with rubber tyres. By August 1935, there were around 200 different products in the Dinky Toys range which included die-cast ships, aeroplanes and small trains. Dinky Toys model cars were available individually in trade packs of six cars per pack. Most models were not made available in individual boxes until 1952.

The number of commercial vehicles expanded with the addition of Series 28, which included many delivery vans. In 1935, a new series 30 was introduced which, for the first time, featured accurate likenesses of specific vehicles. They included a generic ambulance, a Daimler saloon, a Vauxhall saloon, a Chrysler Airflow saloon, and a Rolls-Royce saloon.[11] Smaller Matchbox-sized Austin 7 saloons and tourers were also made. At about the same time, several models were also made and marketed in France. Liveries of well-known companies began to decorate the commercial vehicles.

Series 30 included:

In 1938, a new Series 36 was introduced. Most of those models were also made after World War II, up to 1948. Production was halted during the war so that the Binns Road factory in Liverpool could produce many items for the war effort. Models in series 36, meanwhile, included a Rover Saloon, a Bentley 2 seat sports coupe, an Armstrong-Siddeley limousine, a British Salmson 4 seater convertible, a British Salmson 2 seat convertible, and a Humber Vogue coupe.[12] Chassis were cast with open holes, saving expense and metal. Provision was made on some models for attachment of metal drivers, but not many appeared before the war, making them more valuable.[13]

Dinky had acute problems on early models with zinc pest, also known wrongly as metal fatigue, caused by impure alloys which caused corrosion between molecules, resulting in cracking of the metal,[14] which would crumble prematurely. That was much more common in the years 1938–1941, and is the main reason why it is rare to find surviving toys in good condition from that period.[7] Some early castings have survived in numbers, while others are rare without some form of damage – such as the 28/2 Series vans. Another theory is that the metal was corrupted by contamination with lead from Hornby train and Dinky Toys production, or lead ties from sacks and foil from cigarette wrappers.

Military

Dinky 151a Medium Tank. This model was made 1937 to 1941 and was reissued from 1947 till 1952, when consumer industry commenced again.

Between 1937 and 1939, a number of military vehicles were introduced, numbered from 151 to 162. They were painted army green, and consisted of a medium and a light tank, an Austin 7 military car, a six-wheeled truck, a reconnaissance car, a searchlight lorry, an anti aircraft gun, a Vickers Light Dragon artillery tractor with limber and 18-pounder gun. Most interesting were several fairly detailed trailers, including an ammunition trailer, a cooker trailer and a water tank trailer. The military offerings were produced through 1941, though a few select models – the clever (161b) anti-aircraft gun, the (151a) medium tank, and some of the trailers – were also made again from 1946 to 1955.[9][page needed]

Pre-war models were fitted with thin diameter 1.626 mm. (0.064 in.) axles, whereas the post-war axles were 2.032 mm. (0.08 in.). The pre-war hubs were smooth, but after the war there was a raised part in the centre of the hub. Tracks on the tanks and the (162a) Light Dragon artillery tractor were made with a wire-link sprocket chain wrapped around the hubs. That gave a mechanical, although not very realistic, appearance to the tracks. The side panels of the anti-aircraft folded and, not only did the gun swivel 360 degrees, but it could be moved from level to about a 50-degree angle upward. The searchlight was also adjustable in horizontal and vertical directions.

Military models were made until the end of production in the late 1970s. A wide variety of military vehicles were produced, such as thejeep-like Austin Champ, which included a driver and passengers.

Aircraft and ships

Aircraft

In the early days of the Dinky Toys range, aeroplanes and ships formed a considerable part of the output of the Binns Road factory, along with models of cars, vans and trucks. Both civilian and military aircraft were subjects for the Dinky Toys modellers, and the model of the Spitfire was sold in a special presentation box between 1939 and 1941, as part of The Spitfire Fund, to raise money for the supply of a real Spitfire to the Royal Air Force. Some models were clearly identified, whereas others re-issued in 1945 had generic names such as Heavy Bomber (66a) and Two Seater Fighter (66c). The reason for that is not clear, but it may have been that they were not true representations of particular aircraft types. However, there were rumours that some models of aircraft and ships were disguised so that enemy agents would not be able to recognise allied aircraft and shipping from the Dinky Toys models. That was of particular importance in the production of French Dinky models, due to the political friction in Europe before the war and the fact that France was occupied by the Axis forces during hostilities. Those theories do not seem to be valid, because the models with generic names were issued in 1945, after hostilities had ceased.[9][page needed]

Production of model aircraft resumed after the war with a mixture re-issues of pre-war models, along with models of new civilian airliners and recently introduced jet-powered aircraft. Production of Dinky planes tailed off in 1968, but was resurgent in 1971 with a range of World War II types complete with battery-powered propellers, as well as modern jet fighters, and even a Sea King helicopter. Those large-scale planes had been developed by Airfix but were made by Meccano Ltd., which had recently been bought by Airfix.

The range included:

No. 60w Sikorsky S-42, suffering from zinc pest
No. 60h. Short Singapore
No. 999. De Havilland Comet

Although the production of aircraft models continued after the war, the heyday of Dinky ships was between 1934 and 1939. The models, which were 1/1200 to 1/1985 scale, were cast from the same unstable alloy that was used across the entire pre-war Dinky range and have therefore suffered from the metal decay that makes survivors all the more rare. Small metal rollers were also included in the design and concealed in the underside of the hull so that the models could be moved smoothly across surfaces. Mirroring the aircraft range, both civilian and military ships were issued, and again, some were disguised.

Ships

The liner France was the only Dinky Toys ship produced in France after the war. It was made partly of zamac and partly of plastic, at the scale of 1/1200.[9][page needed] It was not until 1976 that five further models were added to the long line of maritime releases from Dinky Toys. Those were in the larger scale of 1/180 – 1/200.

Models in the pre-war range include:

Dinky 52a Cunard White Star Line Queen Mary. The model has significant zinc pest decay.

Post-war history

No Dinky Toys models were made between 1941 and 1945. The French Meccano factory was occupied by the Germans, some of whom worked for Märklin, and the British factory was on war work but every Christmas a few models would be sold from pre-war stocks. Thus during and after the war a few 'pre-war' models survived and were sold in 1945.[15][9][page needed] The first new models released after the war were U.S. military jeeps ref.153a in April 1946 in England and ref. 24M in France, it was the first Dinky Toy made at the scale of 1/43.

Dinky 0 Series no. 25v Bedford refuse wagon with tipping bed

Besides some of the military vehicles offered before and after the war, the first significant releases from Dinky in the late 1940s were the 40 series, which were all British saloons. The first new model car released was an Armstrong Siddeley Coupe.[16] These were the opening chapter of the "golden age" of Dinky Toys in the post-war era and represented far greater accuracy and detail than their pre-war relatives. These were very popular and today are often considered by collectors to be the quintessential Dinky Toys models. The 40 series cars were manufactured from better quality alloy, meaning that the survival rate is higher and although originally sold in trade boxes of six, they were renumbered in 1954 and re-coloured in two-tone paintwork in 1956, the Austin Somerset ref. 40j is probably the first model sold in its own individual yellow box. The first two models in the 40 series were in 1:48 scale, while the others were in 1:45 scale.[17] The Jowett Javelin saloon is an interesting case as plans were made, but the model was never issued. More recently, Odgi Models have remade the Jowett and a couple other Dinky Toys Models which were planned but never manufactured.

The series included :

Number Model Year
40a Riley Saloon 1947
40b Triumph 1800 1948
40c Jowett Javelin Not issued
40d Austin A40 Devon 1949
40e Standard Vanguard 1948
40f Hillman Minx 1951
40g Morris Oxford 1950
40h Austin FX3 Taxi 1952
40j Austin A40 Somerset 1953

Dinky Supertoys

As part of the post-war development and expansion of the range, in 1947 Meccano Ltd introduced a series of model lorries modelled to the usual Dinky scale of 1:48, and introduced the altered name of Dinky Supertoys. Some models issued in this line included:

Dinky Supertoy No. 923: Big Bedford Van "Heinz" (issued 1955–1958), from a 1960 Dinky Toys catalogue
Number Model Year Re-numbered

in 1954

501 Foden 8 Wheel Wagon 1947 901
502 Foden Flat Truck 1947 902
503 Foden Flat Truck with Tailboard 1947 903
504 Foden Tanker 'Mobilgas' 1953
505 Foden Flat Truck with Chains 1952 905
941 Foden 8 wheel tanker 'Mobilgas' 1953
942 Foden Tanker 'Regent' 1955
943 Leyland Tanker 'Esso' 1958
944 Leyland Tanker 'Shell BP' 1963

In 1950, Meccano introduced in the Supertoys series a number of Guy Vans finished in appealing period liveries. Each model was an identical all metal box van with opening rear doors. The Guy cab was joined by a Bedford S cab in 1955 and a Guy Warrior cab was introduced in 1960. Later, A.E.C. and other models were also added. Supertoys were commonly packaged in white boxes with thin blue horizontal lines and were marketed all on their own – no longer were these models solely focused on railroad accessories. Still, they did not quite reach the commercial marketing level of later die-cast brands like Corgi Toys or Solido.

Supertoys no. 903 Foden Flat Truck with typical blue and white striped box
Number Model Year
514 Guy Van 'Slumberland' 1950
514 Guy Van 'Lyons' 1952
514 Guy Van 'Weetabix' 1952
514 Guy Van 'Spratts' 1952
918 Guy Van 'Ever Ready' 1955
919 Guy Van 'Golden Shred' 1955
920 Guy Warrior 'Heinz' 1960
923 Bedford S Van 'Heinz' 1955

Meccano continued producing detailed Dinky Supertoys commercial vehicles through the fifties and sixties, including such subjects as a Mobile Television Control Room and Camera Van in both BBC and ABC Television liveries, a Leyland test chassis with removable miniature 5 ton weights, a series of military vehicles including a Corporal Erecting Vehicle and missile (a subject also modelled by Corgi Toys at the same time), a range of Thornycroft Mighty Antar heavy haulage transporters complete with loads and a Horse Box in British Railways and later in Newmarket liveries.

In 1965 after the take over of Meccano Ltd. by Lines Brothers, the marque Dinky Supertoys was dropped and the large models were renamed Dinky Toys. Later a new trade mark was registered in France : "Super Dinky" but only a few models were issued with this marque before the production stopped definitely.[9][page needed]

Post-war car lines

A number of Dinky models from the mid-1950s. Featured prominently are a couple of no. 237 Mercedes-Benz W 196 Grand Prix cars.

Having been well known before the war, Dinky Toys were popular in the United Kingdom in the early 1950s. The smaller cars were in a scale of 1:45, while the larger cars and many Supertoys, as stated above, were in a scale of 1:48, which blended in with O scale railway sets, but many buses and lorries were scaled down further.[17] The scale of the Dinky Toys land vehicles range from 1/27 for the Lunar Roving Vehicle ref. 355 and 1/99 for the Duple Viceroy Luxury coach ref. 293 / 296. Because of the introduction of data processing, the British Dinky Toys range was reorganized in 1954 with a new numbering system – previously model numbers were commonly followed by letters and often sold in sets with several vehicles. Now each model had its own unique three digit catalogue number (with no letters), and cars were now sold in individual boxes.[18] The renumbering also happened in France, but in 1959.[9][page needed]

Dinky no. 152 Austin Devon Saloon. Model appears to be stripped of paint.

The Dinky Toys ranges became more sophisticated throughout the 1950s. Some cars in the sporty pre-war line were carried on after the war like the Alvis sports tourer, the Sunbeam Talbot, or the Frazer-Nash BMW. These offerings then led to a magnificent line-up in the post war Dinky range, which included a Lagonda, an Armstrong-Siddeley, MG, Sunbeam Alpine, Austin Atlantic, Austin Healey 100, Aston Martin DB3S racer, Morris Oxford sedan and Triumph TR2.[19] Additionally, several models introduced were American cars, and even now still seem unique choices, such as a 1954 Packard convertible, a 1955 Plymouth Belvedere, a Cunningham, the 1953 and 1957 Studebakers (and a 1957 Packard), a Chrysler New Yorker Convertible, a 1957 Rambler, and a late model Hudson Hornet. In many cases, even domestic British / European vehicle choices for models were not everyday selections, e. g. the Connaught racing car, Maserati Sports 2000, AC Aceca, Humber Hawk, 1954 Bristol LeMans car with large fins – and a Daimler instead of the more routine Jaguar.

Several colourful gift sets of sports and racing cars were offered in the mid-1950s, usually five cars to a set. For example, Gift set no. 4 / 249 offered Cooper-Bristol in British racing green, Alfa Romeo in the Italian red, Ferrari in the blue and yellow of Argentina (Juan Manuel Fangio's country), and H.W.M. in light green, and Maserati in the red and white colours of Switzerland. No. 149, the sports car set, offered an MG, Austin-Healey, Sunbeam Alpine, Aston-Martin and Triumph TR-2.[20][9][page needed]

Production of agricultural machinery and implements had occurred since the 1930s, such as the 1933 number 22e Fordson farm tractor, and such offerings were maintained post-war. One interesting model was the odd Opperman 3-wheeled Motocart, a tilting flat-bed vehicle with engine hanging off to the side of its large front wheel.[21]

Dublo Dinky

No. 073 Dinky Dublo Land Rover. The truck was just under two inches (5.1 cm) long and originally came with a horse trailer.

In November 1958, Meccano Ltd introduced the Dublo Dinky range of models in 1:76 OO scale, designed to be used with the Hornby railway system.[22] These were relatively cheap to produce – having a one-piece die-cast metal body, a base plate and or windows on some, and plastic wheels. There was the added bonus of being able to compete in the small-scale toy car market which, at the time, was dominated by Lesney's Matchbox.[23]

There were a total 15 Dublo models, although with upgrades and modifications there are possibly up to 42 variations (not including box variations) manufactured.[23] All models came boxed. There were no colour changes throughout the short life of Dublo.

Models were well-proportioned and looked similar in style to contemporary Matchbox or Budgie Toys. For example, similar to Matchbox, the Land Rover (which came with a horse trailer) had windows, grey or black plastic wheels and a black base.[24] Wheels, however, (the Land Rover had one on the bonnet as well as one underneath) were somewhat flatter and wider than those of Matchbox and their circumference was not ribbed at the beginning but this feature was added later. The baseplate, however, was pressed steel with etched lettering (not die-cast with moulded lettering as was the case with Matchbox, Budgie Toys or Lone Star vehicles). Finally, the Land Rover had a trailer hook behind which was a cut, curved extension of the baseplate. The front and rear axles were held to the vehicle differently. The front was covered by the tube of the baseplate and held pinched on each side by extensions of the die-cast body. The rear axle was exposed and run through holes in rounded sections folded over on each side of the plate. The ref. 072 Bedford articulated lorry was a reproduction of the Meccano factory lorry, its articulated flat trailer was dimensioned to receive the Hornby Dublo container.[9][page needed]

The range met with limited success and the first model was withdrawn in October 1960 having only been on sale for 18 months – there was no replacement. Within 22 months of their launch there were price reductions to 3 models. Further models were withdrawn in May 1961, September 1962 and March 1963 until in November 1963 those models that remained were taken off the shelf six years after the Dinky Dublo line was introduced. Thus ended the production of Dublo Dinky Toys under Meccano who went into receivership two years later.

Five of the Dublo models enjoyed a new lease on life when Meccano was purchased by Lines Brothers.

The range:[22][9][page needed]

Dublo Dinky models: Commer van (no. 63), Massey-Harris-Ferguson tractor (no. 69) and Singer Roadster (no. 62).
  • 061 Ford Prefect: Introduced in March 1958 and withdrawn October 1960. Three model variations and one box variation.
  • 062 Singer Roadster: Introduced in March 1958 and withdrawn 1960. Two model and one box variation.
  • 063 Commer Van: Introduced in March 1958 and withdrawn 1960. Three model and two box variations.
  • 064 Austin Lorry: Introduced December 1957; withdrawn 1962. Four model variations and four box variations.
  • 065 Morris Pick Up: Introduced December 1957; withdrawn 1960. Two model and one box variation.
  • 066 Bedford Flat Truck: Introduced December 1957; withdrawn 1960. Four model variations and two box variations.
  • 067 Austin Taxi: Introduced March 1959; withdrawn 1966. Two model variations and two box variations.
  • 068 Royal Mail Van: Introduced April 1959; withdrawn 1964. Three model variations and two box variations.
  • 069 Massey Ferguson Tractor: Introduced September 1959; withdrawn 1964. Five model variations and two box variations. Model was also issued with a low sided wagon as part of the Hornby Dublo railway system, no. 6494, boxed.
  • 070 AEC Mercury Tanker: Introduced October 1959; withdrawn 1964. Two model variations and two box variations.
  • 071 Volkswagen Delivery Van: Introduced March 1960; withdrawn 1964. Three model variations and two box variations.
  • 072 Bedford Articulated Flat Truck: Introduced June 1959; withdrawn 1964. Two model variations and no box variations.
  • 073 Land Rover & Horse Trailer: Introduced September 1960; withdrawn 1966. The most complex of all Dublos; three model variations and three box variations. The horse came in light, medium and dark tan.
  • 074 This number was never used : Land Rover was to be marketed as separate but model was never produced.
  • 075 This number was never used : Horse trailer was to be marketed as separate but model was never produced.
  • 076 Lansing Bagnall Tractor & Trailer: Introduced June 1960; withdrawn 1964. No model variation but two box variations.
  • 077 This number was never used : The planned model was to have been an AEC Transporter but model was never produced.
  • 078 Lansing Bagnall Trailer (Trade box of 6): Introduced June 1960; withdrawn 1966. Three box variations.

Competing with the "Ones with Windows"

Dinky Toy No. 155: Ford Anglia (issued 1961–1966)

Dinky offerings at this time were striking, but due to the lack of much competition, development of new models was perhaps a bit slow at least until July 1956, when Mettoy introduced a rival line of models under the Corgi brand name. The most obvious difference was the addition of clear plastic window glazing. While Corgi Toys called their vehicles, "The Ones With Windows", Meccano Ltd responded by updating the Dinky Toys range and the models from both companies quickly became more and more sophisticated featuring such things as working suspension, "fingertip steering", detailed interiors, and jewelled headlights. The first model to have jewelled headlights was the no. 196 Holden Special sedan made from 1963 to 1969.

Truck offerings remained continuously creative including a Simca glass truck with a sheet of "glass" (clear plastic) and a mirror (polished aluminium), a Leyland Octopus flatbed truck complete with realistic chain around the bed, a car carrier with a car carrying trailer, a Dunlop tyre rack full of tyres, a Berliet truck hauling an electrical transformer, and an intricately detailed Brockway bridgelaying truck. One of the most astounding was the Mighty Antar truck hauling a large gold ship's propeller. A wide variety of military vehicles continued under production.

A rival third range of model cars also appeared in 1959 called "Spot-on" which were manufactured in Northern Ireland and produced by Tri-ang, a division of Lines Brothers. This range was kept to one scale, 1:42, also featured mainly British makes, and were comparatively more expensive, never managing to sell as many units as Corgi or Dinky Toys. To compete with Spot-on, the scale of British Dinky Toys was increased to 1:42 in 1963.[17] In 1964 Tri-ang took over the parent Meccano company (which included Hornby trains as well as Meccano itself). Since Dinky Toys were more popular, Spot-On Models were phased out in 1967, although a few cars originally designed for Spot-On were made in Hong Kong and marketed as Dinky Toys. After the take-over, Meccano continued to use the 1:42 scale for many of the English made cars and trucks until 1977. The French factory stuck to 1:43 scale, which it had used since 1947.[9][page needed]

The Mattel onslaught

In 1969, two years after appearing in America, Mattel's Hot Wheels entered the U.K. model car market. Their low-friction axles and bright paint schemes gave new play value and appeal. Dinky and other British brands rushed to catch up, usually unsuccessfully. Each manufacturer responded with its own version of Hot Wheels innovations–Dinky's name was "Speedwheels".[25] The company continued to make innovative models, with all four doors opening (a first in British toy cars), retractable radio aerials (another first), new metallic paints, and jeweled headlights (pretty, but not very realistic). Such features, however, were expensive to manufacture and toy prices could only be kept low if the quantity was high, and in the face of Mattel's creation, Dinky faced an uphill battle.

Though the writing was on the wall, Dinky's offerings in the 1970s covered the entire spectrum of vehicles, both real and fictitious. Besides the normal gamut of passenger, sports and racing cars, buses, farm, emergency and military vehicles – cars, aeroplanes and spacecraft were also offered from popular (mostly British) TV shows of the time like Captain Scarlet and the Mysterons, UFO, Thunderbirds, the Pink Panther, The Secret Service, and Joe 90 (Dinky Toys 1974). It could be argued, though, that it was too little too late, as Corgi Toys had already been offering for several years vehicles from far more well-known shows and movies in the United States like Batman, The Saint, Daktari, James Bond, and The Man from U.N.C.L.E. Dinky's seemingly weaker standing made it all the more susceptible to Mattel's unstoppable Hot Wheels onslaught. At least the Corgi name still survives as a well-known collectible brand.

Into the 1970s, many British made Dinky vehicles lost the precision quality of detailing and proportions seen during the two previous decades. Models like no. 186 Jensen FF or no. 213 European Ford Capri were rather chunky and unrefined with thick metal door frames, imprecise grilles, and ungainly doors and bonnets painted in separate colours from the rest of the body. Many just did not look quite right. Others, like the no. 1453 Citroën DS Présidentielle saloon were still impressive–flying French flags, with driver, and battery operated lights.[26] Some of the truck and construction models remained very clever as well, with many moving features, like the Bedford refuse truck or the Taylor Excavator. At this time, Dinky also introduced "Action Kits" which were regular models that came disassembled with build instructions and consisted of about 40 pieces.[27] On the other hand, French Dinky Toys, which had to compete with Solido since 1957, were much more accurate with better paint and sharper details than their English counterparts. The no. 825 DUKW military truck is a good example of the quality of French Dinky Toys.[9][page needed]

Mini-Dinky

A second series of small scale models was introduced four years later in 1967, somewhat larger than the Matchbox range at 1:65. Mini-Dinky Toys, as the range was called, featured opening bonnets, doors and boots and were produced in Hong Kong and the Netherlands, with some construction models designed in Hong Kong as copies of models made in Italy by Mercury. The latter were to a smaller scale ranging from 1:87 to 1:130 depending on the model.

Each model was sold in stackable red plastic garages, with clear removable top and sides. The model would slide out of a double hinged opening door to one end. This was in place of the usual cardboard box. Some Mini-Dinkys were also blister packaged in a dark grey pack (some with garage and some not) with bright yellow lettering (Mini Dinky 2011).

Television and movie tie-ins

Although Dinky Toys were not known as widely for producing television related models as Corgi Toys, they still made a number of vehicles widely known from the small screen. Many of these models were the result of beating Corgi Toys to the signing of a licensing deal with Gerry Anderson's Century 21 Productions, whose programmes are immensely popular in the United Kingdom. The French factory produced only one TV series related model: the 1406 Renault 4 Sinpar "Michel Tanguy".[9][page needed]

Dinky's Spectrum Patrol Car, from the Captain Scarlet series
Num. Model Year Television show Reference
100 Lady Penelope's FAB1 1967 Thunderbirds
101 Thunderbird 2 1967 Thunderbirds
102 Joe's Car 1969 Joe 90
103 Spectrum Patrol Car – SPC 1968 Captain Scarlet and the Mysterons
104 Spectrum Pursuit Vehicle – SPV 1968 Captain Scarlet and the Mysterons
105 Maximum Security Vehicle – MSV 1968 Captain Scarlet and the Mysterons
106 The Prisoner Mini Moke 1967 The Prisoner
107 Stripey the Magic Mini 1967 The Magic Toyshop
108 Sam's Car 1969 Joe 90
109 Gabriel, Model T Ford 1969 The Secret Service
112 Purdy's Triumph TR7 1978 The New Avengers
113 John Steed's Jaguar XJ12C Not issued The New Avengers
350 Tiny's Mini Moke 1970 The Enchanted House
351 UFO Interceptor 1971 UFO
352 Ed Straker's Car 1971 UFO
353 S.H.A.D.O. 2 Mobile 1971 UFO
354 The Pink Panther's Car 1972 The Pink Panther Show
357 Klingon Battle Cruiser 1977 Star Trek Coopee 2015
358 USS Enterprise 1977 Star Trek
359 Eagle Transporter 1975 Space: 1999
360 Eagle Freighter 1975 Space: 1999
361 Zygon War Chariot 1978
363 Zygon Patroller 1979
368 Zygon Marauder 1979
477 Parsley's Car 1970 The Adventures of Parsley
602 Armoured Command Car 1976 The Investigator
1406 Renault 4 4x4 Simpar Michel Tanguy. 1968 The Aeronauts

Country-specific models

France

French Dinky Nestle's laitier (milk truck)

In 1912 Frank Hornby set up an office in Paris on Rue Ambroise Thomas to import Meccano toys into France. By 1921, the French market had proved so successful that production of Meccano began in Paris at the newly opened factory on Rue Rebeval, with another plant opening in 1931 in Bobigny where production of the Dinky Toys range would be based. In the early days production consisted mainly of tiny model trains cast in lead, with vehicles gradually increasing in number. By the late 1930s the French Dinky Toys range had begun to diversify from that of the British parent company, concentrating on the products of the French motor manufacturers and eventually including; Citroën, Peugeot, Simca, Renault, Panhard and Ford of France.[28]

During the Second World War the Meccano factory was commandeered by the invading Germans and used in the Nazi war effort. The Bobigny factory was also produced an equivalent toy to the Meccano using the Märklin name. From 1945, the model vehicles were forcibly shod with solid metal wheels and the pumps did not have rubber hoses due to the shortage of rubber which was needed for the army. In the early post war period, rubber was needed badly as the French supply came from Cambodia and Laos in war against France, rubber tyres were not fitted on models until 1950. In 1951, the headquarters and offices which were still at Rue Rebeval closed and Dinky Toys production was now solely based at Bobigny.[9][page needed][29]

French Dinky truck and catalog from the late 1930s

In 1951, French Meccano has been the first post-war European manufacturer to introduce 1:43 scale. Initially, the scales of French Dinky Toys were similar to those of English Dinkys. The Citroën Traction Avant (24N), released in 1949, was 1:48, while the Ford Vedette 1949 (24Q), released in 1950, was 1:45, the same scales as used in the British 40 series. But then, in 1946 Meccano France released their first car in 1:43 scale: the Jeep (24M).[9][page needed]

By the late 1950s, Italian, German and other marques, like the Dutch DAF were also offered by Dinky Toys of France.[30] Focusing on export, American cars were also made like the late 1950s Studebaker, Chrysler's DeSoto, Buick Roadmaster, Plymouth Belvedere Coupe, Chrysler New Yorker convertible and Saratoga sedan, Ford Thunderbird "Squarebird" and Lincoln Premiere sedan.[31] 1960s cars produced by Meccano France were the first Corvair sedan, a 1967 Ford Thunderbird coupe and a 1966 Ford Galaxie 500 sedan.

Renault 4L, French Dinky model no. 518

Some models such as the Volkswagen Karmann Ghia were produced both in France as 24M / 530 and in the UK at the Binns Road plant in Liverpool as number 187. By the 1960s there was virtually no crossover of product between the two countries resulting in a fascinating range that complemented the models. The vast majority of the French Dinky range was only available in the home market, Belgium, Switzerland, U.S.A. and other non-British Commonwealth countries although a few models did make it across the English Channel both before and after the war. Similarly, some examples of the British range of Dinky Toys were exported to France at the same time. The factory at Bobigny closed in 1970 and production moved to the present Meccano factory in Calais where the range continued to be manufactured until 1972 when the final single sheet catalogue spelt the French Meccano-built end for the best known name in die-cast toys. A contract had been signed with the Spanish firm Auto Pilen who received some tools and produced some models both as Dinkys and Auto-Pilens.[9][page needed][29]

Spain

As import duties were high on finished goods and reduced on components, to get into the Spanish market, Meccano s.a. (France) exported sixteen unpainted and unassembled Dinky Toys to the Novades Poch Company in Barcelona. There the models were finished and fitted with specific Pirelli tyres.

The models are:

In 1974 labour was getting too expensive in France, and Meccano subcontracted the manufacture of some models to Auto Pilen s.a. in Spain. These models had already been made in France and were sold exclusively under the marque Dinky. When the Calais factory closed down some of the recent tools were sent to Liverpool where the models were produced with new baseplates. Some of these tools were later sent to Auto-Pilen where they were modified or updated before being re-issued; however, it is not known if the dies were modified by Meccano or by Pilen. These models were sold in France under the marque Dinky, they were clearly identified as Dinky and as MADE IN SPAIN on the base plate. In Spain they were sold as Pilen and marked as such. Pilen models, most of which were Dinky dies, were very popular and numerous in Spain and commonly sold in El Corte Inglés and Galerias Preciados department stores.

According to a contract between Meccano s.a. and Pilen, the last five so called French Dinkys were in fact Pilen models designed and tooled in Algeciras and fitted with a Dinky Toys base plate. Like the previous series, they were sold in France as Dinky and are very rare and as Pilen in Spain.[9][page needed]

They were :

South Africa

A limited-edition set of Dinky Toys from the mid-1950s shipped to the South African Defence Force

Meccano Ltd exported Dinky Toys to all of the United Kingdom's old colonies relatively cheaply because of existing Commonwealth trade agreements. South Africa was one of its big importers.

Around 1952–1954, Meccano Ltd shipped to South Africa a limited-edition set of vehicles for the South African Defence Force. This set included a Motor Truck, a Covered Wagon, an Ambulance, a Dispatch Rider, a Van, a petrol tanker, a fire engine, a road roller, a Mechanical horse and trailer, a loudspeaker van.[9][page needed]

When South Africa withdrew from the Commonwealth in 1961, it imposed a luxury goods import tax, making Dinky Toys very expensive – a potential loss for Meccano Ltd. To resolve this problem, Meccano Ltd began shipping Dinky Toy parts to South Africa in 1962 where models were assembled and painted locally. The import of unfinished goods was not subject to the tax. These models were sold in South Africa between 1962 and 1963 and it is believed that only one batch of each model was produced, making South African Dinky Toys very rare. South Africa also imported Dinky Toys parts from the French factory in 1966 and six models were assembled and painted locally.[32]

Some of the distinguishing features of South African Dinky Toys are:

  • The boxes have Afrikaans lettering at the one end and "Printed in South Africa" on the side.
  • The colours are often different from those on the same models assembled in the UK.
  • The base plates have a glossy finish, whereas the same models released in the UK have matte black base plates.

South African Dinky Toys from Liverpool were:

  • 112 Austin Healey Sprite Mk. II
  • 113 MG B
  • 139 Ford Cortina
  • 140 Morris 1100*
  • 141 Vauxhall Victor Estate car
  • 142 Jaguar Mk. X.
  • 144 Volkswagen 1500
  • 148 Ford Fairlane
  • 155 Ford Anglia
  • 172 Fiat 2300 station wageon
  • 177 Opel Kapitan
  • 181 Volkswagen
  • 183 Mini Minor Automatic
  • 184 Volvo 122S saloon
  • 186 Mercedes 220
  • 193 Rambler cross country station wagon
  • 194 Bentley Serie S coupe
  • 196 Holden special sedan
  • 198 Rolls-Royce Phantom V
  • 240 Cooper
  • 241 Lotus
  • 242 Ferrari
  • 242 B.R.M.
  • 300 Massey Harris tractor
  • 405 Universal Jeep
  • 449 Chevrolet El-Camino pick-up

South African Dinky Toys from Bobigny:

  • 519 Simca 1000
  • 548 Fiat 1800 familiale
  • 552 Chevrolet Corvair
  • 553 Peugeot 404
  • 554 Opel Rekord
  • 555 Ford Thunderbird

Chile

Circa 1967–1973, for reasons related to import substitution, some Dinky Toys were made in Arica, a tax free port at the very north of Chile. Only twelve models are known today, those which in England were packed in clear boxes and were provided in Chile with specific yellow packaging with a red 'globe' symbol. The boxes were printed with "Armado en Arica" ("Assembled in Arica"). Many of these models were painted in different colours from those made in England. The following are some of the models made in Chile:[9][page needed]

  • 110 Aston Martin DB5
  • 116 Volvo 1800 S
  • 129 Volkswagen 1300
  • 232 Ford RV 40 (with left hand drive)
  • 136 Vauxhall Viva (with left hand drive)
  • 153 Aston Martin DB6
  • 161 Ford Mustang Fast back
  • 170 Lincoln Continental
  • 215 Ford GT 40 racing car (with left hand drive)
  • 216 Dino Ferrari
  • 240 Cooper racing car
  • 242 Ferrari 156 racing car
  • 243 Formula 1 B.R.M.

India

Original British-made Dinky Toys had been available in select cities in India from pre-war days until about 1955, when import curbs on toys came into effect. Old stocks of original Dinky toys continued to be available for a few years in Calcutta and other metro areas until supplies were exhausted.

Later, similar to how Corgis became Milton Toys and Matchboxes became Maxwells in India, Dinkys eventually appeared there under a distinct name. In 1963, Meccano closed its Speke factory and sold the dies, the casting machines and remains of spare parts and yellow boxes to S. Kumar & Co. in Calcutta, India. Toys were marketed as Atamco Ltd. products. The toys were first assembled with parts made in Liverpool and packed in original yellow boxes with the Dinky Toys name. The quality was very poor and it is believed that Meccano Ltd. asked S. Kumar & Co. not to use the Dinky name. Kumar then applied stickers with the name NICKY on the boxes to hide the name DINKY. Later when the stock of original boxes ran out, NICKY TOYS boxes of poor quality were printed in India.[9][page needed]

These were selected Dinky dies, and not the whole British range – with only 32 different cars and trucks produced. Several aeroplanes were also made.

Hong Kong

Between 1965 and 1967 six model cars were produced for Dinky Toys in Hong Kong for the lucrative U.S. market. Originally intended to be produced by Spot-On, but re-branded as Dinky Toys when the Spot-On parent company (Tri-ang) bought Meccano Ltd, they were built to the usual Spot-On scale of 1:42. These were all American vehicles:

During 1978 and 1979, production of Dinky Toys in Hong Kong was again resumed. These were poor quality models, however, compared to earlier Dinkys, and an attempt to cut production costs and possibly shift production should the Binns Road Factory close, which it eventually did. So, the last new Dinky Toys made by Meccano were Hong Kong products. These are now some of the most sought after of all Dinky Toys. A few, such as Steed's Jaguar from the New Avengers TV series exist as pre-production examples only.

Italy

In 1980 after the Binns Road factory had closed two models have been made in Italy:

The parts may have been made in England or the tools exported, they were made and assembled by Polistil in Milan.[9][page needed]

Demise and rebirth

The Matchbox connection

Changing fashions in the toy industry, international competition and the switch to cheap labour in lower wage countries meant that the days of British-made toy vehicles like Dinky Toys were numbered. After attempts at simplifying the products as a means of saving costs, the famous Binns Road factory in Liverpool finally closed its doors in November 1979. By comparison, Corgi Toys managed to struggle on until 1983. Matchbox was taken over by Universal International of Hong Kong in 1982.[33] Thus ended the era when UK-made die-cast toy models were dominant.

The Dinky trade-name changed hands many times before ending up as part of Matchbox International Ltd in the late 1980s. This seemed to be a logical and perhaps synergistic development, uniting two of the most valuable and venerated names in the British and world die-cast model car market under one roof.[citation needed] For a time some Matchbox vehicles were sold under the Dinky name.[34] In the 1980s, Matchbox began issuing model cars of the 1950s and 1960s through the "Dinky Collection" – these models were marketed toward adult collectors. The models, like a Wolseley Hornet or a 1953 Buick Skylark convertible, were attractive and honoured the tradition of the Dinky name in realism. In fact these were often even more detailed than original Dinkys, instead resembling something more like Lledo's Vanguard range. Still, production stopped after only a few years.

The "Dinky Collection" eventually was absorbed into a themed series offered by Matchbox Collectibles Inc, owned by the US giant Mattel – which portrayed little interest in any historical honoring of the Dinky brand. Mattel has preferred to occasionally re-badge normal Matchbox models with the Dinky name for some editions in certain markets. In some cases 1:43 scale models from the Matchbox era were sometimes given the Dinky name. No new "dedicated" Dinky castings have been created in the Mattel era since Matchbox Collectibles was shut down in 2000.

Atlas partworks issues

In 2008 French partworks publishers, Atlas Editions, began to reissue models previously available as Dinky Toys under licence from Mattel. These models were only available by subscription in some European countries, initially France. This range is a twice monthly partwork featuring a particular Dinky Toy model complete with certificate and an information leaflet on the history of the casting and the real model. These models were from brand new tooling as the original Meccano dies had been previously sold to other toy makers worldwide or were destroyed or lost. The castings were similar to original Dinky Toys but the baseplates were marked "Atlas Editions – Made in China" which replaced the "Meccano – Made in England" (or "France") imprints. The new range is available in the UK, Denmark, the Netherlands, Belgium and Sweden.

In 2016, DeAgostini, the parent company of Atlas editions, launched another range of Dinky Toys in the United Kingdom and Italy, this time relaunching some of the range from 2008 onward, but replacing Atlas Editions with DeAgostini on the baseplate. Offerings to the general public were through selected newsagents in Dorset and Milan or by subscription. After a test run of 5 issues the range was discontinued in the UK. In the United Kingdom, the first five models issued were the Triumph TR2, Bedford CA Van, Ford Thunderbird, Morris Mini Traveller and the Jaguar XK120 coupe. In Italy the first three issues were the Citroen DS, Fiat 600 and the Volkswagen beetle. Issue 6 was continued in Italy and eventually Issue 6 was issued in the UK which as of November 2019 stands at issue 44. The Italian range ended after 70 issues in July 2019.

Notes

  1. ^ Ralston, Andrew (2009). Diecast Toy Cars of the 1950s & 1960s: The Collector's Guide. Dorchester England: Veloce Publishing. p. 7. ISBN 9781845841805.
  2. ^ Richardson, Mike; Richardson, Sue. 1999. Christie's Presents The Magical World of Automotive Toys. San Francisco: Chronicle Books. p. 128. ISBN 0811823202
  3. ^ Ellis, Chris. 2009. The Hornby Book of Model Railways. Conway/Anova. ISBN 9781844860951[page needed]
  4. ^ Wainwright, Oliver (15 May 2013), "Frank Hornby: The Man Who Put the World in a Box", The Guardian online, Art & Design section.
  5. ^ "Interesting Three-Wheeler Cars". Meccano Magazine vol. 19 n. 4, (April 1934). pp. 306–7.
  6. ^ Force 1988, p. 6.
  7. ^ a b Ramsay, John. 1993. Catalogue of British Diecast Model Toys (5th ed.). Swapmeet Toys and Models. pp. 88–148 (88). ISBN 0-9509319-6-9.
  8. ^ a b Meccano Magazine vol. 19 n. 4, (April 1934). p. 332.
  9. ^ a b c d e f g h i j k l m n o p q r s t u Dujardin 2020.
  10. ^ Simpson, Margaret. 2008. Collection of Dinky Toys, 1935. Powerhouse Museum Collection online.
  11. ^ a b Gardiner & O'Neill 1996, pp. 46–7.
  12. ^ Gardiner & O'Neill 1996, pp. 48–9.
  13. ^ Gardiner & O'Neill 1996, p. 48.
  14. ^ Harvey 1974, p. 1997.
  15. ^ Harvey 1974, pp. 1997–8.
  16. ^ Smeed 1980, p. 31.
  17. ^ a b c Schellekens, Jona. 2010. "Dinky Toys car scales: Was there a standard?" Model Collector 25 (11), pp. 72–73.
  18. ^ Smeed 1980, p. 33.
  19. ^ Gardiner & O'Neill 1996, pp. 50–1.
  20. ^ Gardiner & O'Neill 1996, pp. 22–3.
  21. ^ Rixon, Peter (2005). Miller's Collecting Diecast Vehicles. London: Mitchell Beazley. pp. 122–3. ISBN 9781845330309.
  22. ^ a b Force 1988, pp. 165–6.
  23. ^ a b Force 1988, p. 47.
  24. ^ Force 1988, see photo at p. 47.
  25. ^ Force 1988, p. 8.
  26. ^ Gardiner & O'Neill 1996, p. 23.
  27. ^ Smeed 1980, pp. 44–5.
  28. ^ Gardiner & O'Neill 1996, pp. 62–3.
  29. ^ a b Wagner, Claude; Dujardin, Jacques (2014). Dinky Toys, les modèles Français 1934 – 1940 (in French). ISBN 9782954435909.
  30. ^ Gardiner & O'Neill 1996, pp. 64–5.
  31. ^ Gardiner & O'Neill 1996, pp. 66–7.
  32. ^ "South African Defense Force Military Items 1950s". Binns Road website. Archived from the original on 29 January 2005. Retrieved 1 April 2021.
  33. ^ McGimpsey, Kevin and Stewart Orr. 1989. Collecting Matchbox Diecast Toys – The First Forty Years. Major Productions. p. 28.
  34. ^ Stoneback, Bruce and Diane Stoneback. 2002. Matchbox Toys. Royston, Hertfordshire: A Quantum Book, published by Eagle Editions. p. 24. ISBN 1-86160-525-0.

References

Wikimedia Commons has media related to Dinky Toys.
  • "Rare Dinky toy collection fetches £150k at Devon auction". BBC News. 15 June 2016.
  • "Dinky Toys Collectors Club – Online Museum". Dinky Toys Collectors Club. 2021.
  • Cavendish, Richard (2011). "The Death of Frank Hornby". History Today online. Vol. 61, no. 9.
  • Coopee, Todd. 2015. "Klingon Battle Cruiser from Dinky". ToyTales.ca. [1]
  • Dalefield, Wes. 2013. History of Meccano webpage. Wes Dalefield's Meccano Erector website. [2]
  • Dinky Toys. 1974. Catalogue no. 10. Tough die-cast metal models.
  • Dujardin, Jacques (2020). The Fabulous Dinky Toys Encyclopaedia. ISBN 978-2-7466-3115-1.
  • Force, Edward (1988). Dinky Toys. Atglen PA: Schiffer Publishing. ISBN 978-0887401527.
  • Gardiner, Gordon; O'Neill, Richard (1996). The Collector's Guide to Toy Cars: An International Survey of Tinplate and Diecast Cars from 1900. London: Salamander Books. ISBN 0-517-15977-5.
  • Harvey, Brian (1974). "Motoring in Miniature". The World of Automobiles: An Illustrated Encyclopedia of the Motor Car. Vol. 17. London: Orbis Publishing, distributed by Columbia House.
  • Johnson, Dana. 1998. Collector's Guide to Diecast Toys and Scale Models, 2nd ed. Padukah, Kentucky: Collector Books, a division of Schroeder Publishing Co. Inc.
  • McCullagh, John (7 April 2008). "Boys' Toys of the 1950s". The Newry Journal. Archived from the original on 24 July 2011.
  • DINTOYS. Dinky Toys – Supertoys Club of Net Catalogue.
  • Rampini Paolo, The Golden Book of Modelcars, Milano 1995, Paolo Rampini Editore
  • Schellekens, Jona. 2009. "The history behind 1:43". Model Collector 24 (12), pp. 54–55.
  • Smeed, Vic, ed. (1980). The World of Model Cars. London: Bison Books, A Chartwell Book. ISBN 0-89009-324-5.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Dinky_Toys&oldid=1226382895"