P-3 radar: Difference between revisions
Typhoon9410 (talk | contribs) Page Created |
Typhoon9410 (talk | contribs) mNo edit summary |
||
| Line 23: | Line 23: | ||
==Description== |
==Description== |
||
The P-3 was produced in two varients the P-3A (fixed) and the P-3M (mobile) with a [[transmitter]] and [[reciever]] mounted on seperate trucks<ref name="RB">{{cite web |url=http://www.radartutorial.eu/19.kartei/karte903.en.html |title=P-3 „Dumbo” |language=English |accessdate=2008-12-24 |date=2008 |author=Christian Wolff }}</ref>. Both varients operate in a similar fashion using two mast mounted [[antenna]] (transmitter and reciever) composed of [[Yagi antenna]] mounted one above the other in the case of the reciever, the radar also used an [[A-scope]] display. Azimuth was scanned mechanically by the reciever antenna with elevation determined using a [[Goniometer]], the [[phase]] difference between the upper and lower Yagi antenna was used to calculate the elevation angle which could then be used to determine the height of the target once the range was known<ref name="RB">. The P-3 had a maximum power output of up to 100 kW and a pulse duration of 10-15 microseconds<ref name="PVO"/>. |
The P-3 was produced in two varients the P-3A (fixed) and the P-3M (mobile) with a [[transmitter]] and [[reciever]] mounted on seperate trucks<ref name="RB">{{cite web |url=http://www.radartutorial.eu/19.kartei/karte903.en.html |title=P-3 „Dumbo” |language=English |accessdate=2008-12-24 |date=2008 |author=Christian Wolff }}</ref>. Both varients operate in a similar fashion using two mast mounted [[antenna]] (transmitter and reciever) composed of [[Yagi antenna]] mounted one above the other in the case of the reciever, the radar also used an [[A-scope]] display. Azimuth was scanned mechanically by the reciever antenna with elevation determined using a [[Goniometer]], the [[phase]] difference between the upper and lower Yagi antenna was used to calculate the elevation angle which could then be used to determine the height of the target once the range was known<ref name="RB"/>. The P-3 had a maximum power output of up to 100 kW and a pulse duration of 10-15 microseconds<ref name="PVO"/>. |
||
==Operators== |
==Operators== |
||
Revision as of 17:40, 24 December 2008
| Country of origin | Soviet Union |
|---|---|
| Introduced | 1947 |
| Type | Early Warning Ground Control |
| Frequency | VHF |
| Range | 120-150 km |
| Altitude | 10 km |
| Azimuth | 360 degrees |
| Elevation | 4-18 degrees |
| Precision | 1.5 km range, 4 degree azimuth and 1.5 degree elevation |
| Power | 80-100 kW |
The "Pegmantit 3" or P-3 (also referred to as "Dumbo"in the west) was a early VHF radar developed and operated by the former Soviet Union.
Development
The "Pegmantit 3" which is abbreviated to P-3 was one of the first early warning and ground control radars to be developed by the former Soviet Union. The development of the radar was initiated in 1943 as a replacment for the previous RUS stations used during the second world war[1] and by the end of 1947 the radar was completed and in operational service[2]. The P-3 was the first radar to be developed by the SKB Design Bureau, a division of State Plant No.197 named after Lenin, the predecesor of the current Nizhniy Novgorod Research Institute of Radio Engineering (NNIIRT)[2]. The radar had to be able to detect an aircraft to a range of no less than 130 kilometers, cover 360 degrees in azimuth and 4-18 degrees in elevation. A responce time of no more than 25 seconds was stipulated and the radar had to be accurate to within 650 meters in range and within 700 meters in altitude, as well as operate in the VHF band[1]. SKB managed to meet these performance requirements with the P-3 radar and this was confirmed during testing in 1945 before entry into service with the PVO[1].
Description
The P-3 was produced in two varients the P-3A (fixed) and the P-3M (mobile) with a transmitter and reciever mounted on seperate trucks[3]. Both varients operate in a similar fashion using two mast mounted antenna (transmitter and reciever) composed of Yagi antenna mounted one above the other in the case of the reciever, the radar also used an A-scope display. Azimuth was scanned mechanically by the reciever antenna with elevation determined using a Goniometer, the phase difference between the upper and lower Yagi antenna was used to calculate the elevation angle which could then be used to determine the height of the target once the range was known[3]. The P-3 had a maximum power output of up to 100 kW and a pulse duration of 10-15 microseconds[1].
Operators
The P-3 was operated by the Soviet Union from 1947[1] but has long since become obsolete and retired from service, replaced by more advanced models entering into service after the P-3.
See Also
External Links
[NNIIRT]
References
- ^ a b c d e "РЛС П-3А (Dumbo)" (in Russian). pvo.guns.ru. 2004-02-24. Retrieved 2008-12-24.
- ^ a b ""Nizhniy novgorod research institute of radio engineering"". NNIIRT. 2008. Retrieved 2008-12-24.
- ^ a b Christian Wolff (2008). "P-3 „Dumbo"". Retrieved 2008-12-24.