Jump to content

Picatinny rail: Difference between revisions

From Wikipedia, the free encyclopedia
Browse history interactively
← Previous editNext edit →
Content deleted Content added
VisualWikitext
Tag: Reverted
m Reverting possible vandalism by 37.4.225.216 to version by Desmond-Hereford. Report False Positive? Thanks, ClueBot NG. (4103560) (Bot)
Line 13: Line 13:


== Significance ==
== Significance ==
Because of their many uses, Picatinny rails and accessories have replaced [[iron sights]] in the design of many firearms, and they are also on the undersides of [[semi-automatic pistol]] frames and grips.<ref>{{Cite web|url=http://gunbelts.com/blog/accessory-rail-for-ccw-gun/|title=Does a Concealed Carry Gun Need an Accessory Rail? {{!}} Gun Belts Blog|website=Bigfoot Gun Belts|language=en|access-date=2018-12-19}}</ref> Their usefulness has led to them being used in [[paintball]], [[Gel Ball blasters]] and [[airsoft]].<ref>{{Cite web|url=https://www.tippmann.com/p/magfed-tcr?pp=24&mobile=0|title=Magfed TCR|website=Tippmann Sports|language=en-US|access-date=2018-12-19}}</ref><!-- Preceding source is for purchase of railed paintball, a discussion about rails on paintball guns would work much better -->
Because of their many uses, Picatinny rails and accessories have replaced [[iron sights]] in the design of many firearms, and they are also on the undersides of [[semi-automatic pistol]] frames and grips.<ref>{{Cite web|url=http://gunbelts.com/blog/accessory-rail-for-ccw-gun/|title=Does a Concealed Carry Gun Need an Accessory Rail? {{!}} Gun Belts Blog|website=Bigfoot Gun Belts|language=en|access-date=2018-12-19}}</ref> Their usefulness has led to them being used in [[paintball]], [[gel blasters]] and [[airsoft]].<ref>{{Cite web|url=https://www.tippmann.com/p/magfed-tcr?pp=24&mobile=0|title=Magfed TCR|website=Tippmann Sports|language=en-US|access-date=2018-12-19}}</ref><!-- Preceding source is for purchase of railed paintball, a discussion about rails on paintball guns would work much better -->


== History ==
== History ==
Attempts to standardize the [[Weaver rail]] designs date back to the early 1980s from work by the A.R.M.S. company and Otto Repa.{{Citation needed|date=November 2012}} Specifications for the [[M16 rifle|M16A2E4 rifle]] and the [[M4 carbine|M4A1 carbine]] received type classification generic in December 1994.{{Citation needed|date=November 2012}} These were the M16A2<ref>{{Cite web|url=http://www.globalsecurity.org/military/systems/ground/m16-variants-a2.htm|title=M16 5.56mm Rifle|last=Pike|first=John|website=www.globalsecurity.org|access-date=2016-05-30}}</ref> and the M4<ref>{{Cite web|url=http://www.globalsecurity.org/military/systems/ground/m4.htm|title=M4 / M4A1 5.56mm Carbine|last=Pike|first=John|website=www.globalsecurity.org|access-date=2016-05-30}}</ref> modified with new upper receivers where rails replaced hand guards. {{verification needed|date=July 2018}}
Attempts to standardize the [[Weaver rail]] designs date back to the early 1980s from work by the A.R.M.S. company and Otto Repa.{{Citation needed|date=November 2012}} Specifications for the [[M16 rifle|M16A2E4 rifle]] and the [[M4 carbine|M4E1 carbine]] received type classification generic in December 1994.{{Citation needed|date=November 2012}} These were the M16A2<ref>{{Cite web|url=http://www.globalsecurity.org/military/systems/ground/m16-variants-a2.htm|title=M16 5.56mm Rifle|last=Pike|first=John|website=www.globalsecurity.org|access-date=2016-05-30}}</ref> and the M4<ref>{{Cite web|url=http://www.globalsecurity.org/military/systems/ground/m4.htm|title=M4 / M4A1 5.56mm Carbine|last=Pike|first=John|website=www.globalsecurity.org|access-date=2016-05-30}}</ref> modified with new upper receivers where rails replaced hand guards. {{verification needed|date=July 2018}}


The rail itself is named after the [[Picatinny Arsenal]] in [[New Jersey]], which was named "after the [[Lenape]]-named peak overlooking the old forge, loosely translated to mean 'rugged cliff by water' or 'water by the hills'."<ref>{{Cite web|title=Picatinny Peak|url=https://njskylands.com/history-picatinny_arsenal|access-date=2020-09-27|website=njskylands.com}}</ref> The Picatinny Arsenal was tasked in 1992 to develop a standardized mounting system after the [[U.S. Army]] was dissatisfied with the contemporary products on the market. The Picatinny team was headed by mechanical designer Gary Houtsma (who was awarded the [[Order of Saint Maurice (United States)|Order of Saint Maurice Award]] in 2014 for this contribution<ref>{{cite web|url=https://www.army.mil/article/137761/picatinny_engineer_recognized_for_developing_venerable_picatinny_rail|title=Picatinny engineer recognized for developing venerable Picatinny Rail|publisher=U.S. Army|date=2014-11-06}}</ref>), who took the measurements from 20 or so different Weaver rail products from weapons bunkers at Picatinny (and even local [[sporting goods]] stores) and came up with an average set of numbers set on a 45-degree angled surface. Houtsma then took the [[specification (technical standard)|specification]]s over to the production facility and requested they design a dimensioning style so the rail could be easily produced and inspected. The factory recognized the similarity of the purposed rail interface to the existing rail design on [[105 mm]] [[howitzer]]s, so they chose to scale down the howitzer rail design and co-opted the production and inspection procedures. The team then sent the finished [[prototype]] over to [[Rock Island Arsenal]] for review and trial, and then to the technical data section to determine if it should be a standard or a specification. After it was determined that the new rail should be a standard, not a specification, it was adopted and fielded in 1995<ref>{{cite web|url=http://www.shootingtimes.com/optics/optics_st_railcrazy_200907/|title=Rail Crazy: Picatinny Rail Basics|last=Guthrie|first=J.|publisher=Shooting Times|date=2010-09-23}}</ref> with the designation ''MIL-STD-1913'', dated February 3, 1995.<ref name="Military Standard 1913">{{ cite web | url = http://www.quarterbore.com/library/pdf_files/mil-std-1913.pdf | title = Dimensioning of accessory mounting rail for small arms weapons | url-status = dead | archive-url = https://web.archive.org/web/20101126233329/http://quarterbore.com/library/pdf_files/mil-std-1913.pdf | archive-date = 2010-11-26 }}</ref>
The rail itself is named after the [[Picatinny Arsenal]] in [[New Jersey]], which was named "after the [[Lenape]]-named peak overlooking the old forge, loosely translated to mean 'rugged cliff by water' or 'water by the hills'."<ref>{{Cite web|title=Picatinny Peak|url=https://njskylands.com/history-picatinny_arsenal|access-date=2020-09-27|website=njskylands.com}}</ref> The Picatinny Arsenal was tasked in 1992 to develop a standardized mounting system after the [[U.S. Army]] was dissatisfied with the contemporary products on the market. The Picatinny team was headed by mechanical designer Gary Houtsma (who was awarded the [[Order of Saint Maurice (United States)|Order of Saint Maurice Award]] in 2014 for this contribution<ref>{{cite web|url=https://www.army.mil/article/137761/picatinny_engineer_recognized_for_developing_venerable_picatinny_rail|title=Picatinny engineer recognized for developing venerable Picatinny Rail|publisher=U.S. Army|date=2014-11-06}}</ref>), who took the measurements from 20 or so different Weaver rail products from weapons bunkers at Picatinny (and even local [[sporting goods]] stores) and came up with an average set of numbers set on a 45-degree angled surface. Houtsma then took the [[specification (technical standard)|specification]]s over to the production facility and requested they design a dimensioning style so the rail could be easily produced and inspected. The factory recognized the similarity of the purposed rail interface to the existing rail design on [[105 mm]] [[howitzer]]s, so they chose to scale down the howitzer rail design and co-opted the production and inspection procedures. The team then sent the finished [[prototype]] over to [[Rock Island Arsenal]] for review and trial, and then to the technical data section to determine if it should be a standard or a specification. After it was determined that the new rail should be a standard, not a specification, it was adopted and fielded in 1995<ref>{{cite web|url=http://www.shootingtimes.com/optics/optics_st_railcrazy_200907/|title=Rail Crazy: Picatinny Rail Basics|last=Guthrie|first=J.|publisher=Shooting Times|date=2010-09-23}}</ref> with the designation ''MIL-STD-1913'', dated February 3, 1995.<ref name="Military Standard 1913">{{ cite web | url = http://www.quarterbore.com/library/pdf_files/mil-std-1913.pdf | title = Dimensioning of accessory mounting rail for small arms weapons | url-status = dead | archive-url = https://web.archive.org/web/20101126233329/http://quarterbore.com/library/pdf_files/mil-std-1913.pdf | archive-date = 2010-11-26 }}</ref>
Line 37: Line 37:
Weaver rails have a slot width of {{convert|0.180|in|mm|2|abbr=on}}, but are not necessarily consistent in the spacing of slot centers.<ref name="autogenerated1">[http://www.brownells.com/aspx/NS/GunTech/NewsletterArchive.aspx?p=0&t=2&i=558 Brownells]</ref> While some accessories are designed to fit on both Weaver and Picatinny rails, most Picatinny devices will not fit on Weaver rails. From May 2012, most mounting rails are cut to Picatinny standards.{{Citation needed|date=July 2018}} Many accessories can be secured to a rail with a single spring-loaded retaining pin.
Weaver rails have a slot width of {{convert|0.180|in|mm|2|abbr=on}}, but are not necessarily consistent in the spacing of slot centers.<ref name="autogenerated1">[http://www.brownells.com/aspx/NS/GunTech/NewsletterArchive.aspx?p=0&t=2&i=558 Brownells]</ref> While some accessories are designed to fit on both Weaver and Picatinny rails, most Picatinny devices will not fit on Weaver rails. From May 2012, most mounting rails are cut to Picatinny standards.{{Citation needed|date=July 2018}} Many accessories can be secured to a rail with a single spring-loaded retaining pin.


== See also ==
STOOOPID
* [[NATO Accessory Rail]]
* [[Warsaw Pact rail]], is a rail mount system to connect telescopic sights to rifles
* [[Rail System (firearms)|Rail Systems]]
* [[Zeiss rail]], a ringless scope mounting standard
* [[Third Arm Weapon Interface System]]


== References ==
== References ==

Revision as of 15:41, 5 January 2022

The M4 carbine with a Picatinny rail system, Grip Pod vertical forward grip, and M68 CCO sight
Picatinny rail dimensions, cross section (dimensions in inches)
Picatinny rail side view (dimensions in inches)

The Picatinny rail (/ˈpɪkətɪni/ or /ˌpɪkəˈtɪni/), or Pic rail for short, also known as a MIL-STD-1913 rail or STANAG 2324 rail (cancelled), is a military standard rail interface system that provides a mounting platform for firearm accessories. It was originally used for mounting of scopes atop the receivers of larger calibre rifles. Once established, its use expanded to also attaching other accessories, such as: iron sights, tactical lights, laser aiming modules, night vision devices, reflex sights, holographic sights, foregrips, bipods, slings and bayonets.

An updated version of the rail is adopted as a NATO standard as the STANAG 4694 NATO Accessory Rail.

Significance

Because of their many uses, Picatinny rails and accessories have replaced iron sights in the design of many firearms, and they are also on the undersides of semi-automatic pistol frames and grips.[1] Their usefulness has led to them being used in paintball, gel blasters and airsoft.[2]

History

Attempts to standardize the Weaver rail designs date back to the early 1980s from work by the A.R.M.S. company and Otto Repa.[citation needed] Specifications for the M16A2E4 rifle and the M4E1 carbine received type classification generic in December 1994.[citation needed] These were the M16A2[3] and the M4[4] modified with new upper receivers where rails replaced hand guards. [verification needed]

The rail itself is named after the Picatinny Arsenal in New Jersey, which was named "after the Lenape-named peak overlooking the old forge, loosely translated to mean 'rugged cliff by water' or 'water by the hills'."[5] The Picatinny Arsenal was tasked in 1992 to develop a standardized mounting system after the U.S. Army was dissatisfied with the contemporary products on the market. The Picatinny team was headed by mechanical designer Gary Houtsma (who was awarded the Order of Saint Maurice Award in 2014 for this contribution[6]), who took the measurements from 20 or so different Weaver rail products from weapons bunkers at Picatinny (and even local sporting goods stores) and came up with an average set of numbers set on a 45-degree angled surface. Houtsma then took the specifications over to the production facility and requested they design a dimensioning style so the rail could be easily produced and inspected. The factory recognized the similarity of the purposed rail interface to the existing rail design on 105 mm howitzers, so they chose to scale down the howitzer rail design and co-opted the production and inspection procedures. The team then sent the finished prototype over to Rock Island Arsenal for review and trial, and then to the technical data section to determine if it should be a standard or a specification. After it was determined that the new rail should be a standard, not a specification, it was adopted and fielded in 1995[7] with the designation MIL-STD-1913, dated February 3, 1995.[8]

A metric-upgraded version of the Picatinny rail, the STANAG 4694 NATO Accessory Rail, was designed in conjunction with weapon manufacturers like Aimpoint, Beretta, Colt, FN Herstal and Heckler & Koch, and was approved by the NATO Army Armaments Group (NAAG), Land Capability Group 1 Dismounted Soldier (LCG1-DS) on May 8, 2009.

Currently, many firearm manufactures include a Picatinny rail system out of factory, such as the Ruger Mini-14 Ranch Rifle.[9]

Design & specifications

Metric dimensions of a Picatinny rail

The rail consists of a strip undercut to form a "flattened T" with a hexagonal top cross-section, with cross slots interspersed with flats that allow accessories to be slid into place from the end of the rail and then locked in place. It is similar in concept to the earlier commercial Weaver rail mount used to mount telescopic sights, but is taller and has wider slots at regular intervals along the entire length.

The Picatinny locking slot width is 0.206 in (5.23 mm). The spacing of slot centres is 0.394 in (10.01 mm) and the slot depth is 0.118 in (3.00 mm).[8]

Comparison to Weaver rail

Whereas the earlier Weaver rail is modified from a low, wide dovetail rail, the Picatinny rail has a more pronounced angular section.[citation needed] Designed to mount heavy sights of various kinds, a great variety of accessories and attachments are now available and the rails are no longer confined to the rear upper surface (receiver) of long arms but are either fitted to or machine milled into the upper, side or lower surfaces of all manner of weapons from crossbows to pistols and long arms up to and including anti-materiel rifles.[citation needed]

The only significant difference between the Picatinny rail and the similar Weaver rail are the size and shapes of the slots, where the Picatinny rail has square-bottomed slots while Weaver rails have rounded slots.[citation needed] This means that an accessory designed for a Weaver rail will fit onto a Picatinny rail whereas the opposite might not be possible (unless the slots in the Weaver rail are modified to have square bottoms.)[citation needed]

Weaver rails have a slot width of 0.180 in (4.57 mm), but are not necessarily consistent in the spacing of slot centers.[10] While some accessories are designed to fit on both Weaver and Picatinny rails, most Picatinny devices will not fit on Weaver rails. From May 2012, most mounting rails are cut to Picatinny standards.[citation needed] Many accessories can be secured to a rail with a single spring-loaded retaining pin.

See also

References

  1. ^ "Does a Concealed Carry Gun Need an Accessory Rail? | Gun Belts Blog". Bigfoot Gun Belts. Retrieved December 19, 2018.
  2. ^ "Magfed TCR". Tippmann Sports. Retrieved December 19, 2018.
  3. ^ Pike, John. "M16 5.56mm Rifle". www.globalsecurity.org. Retrieved May 30, 2016.
  4. ^ Pike, John. "M4 / M4A1 5.56mm Carbine". www.globalsecurity.org. Retrieved May 30, 2016.
  5. ^ "Picatinny Peak". njskylands.com. Retrieved September 27, 2020.
  6. ^ "Picatinny engineer recognized for developing venerable Picatinny Rail". U.S. Army. November 6, 2014.
  7. ^ Guthrie, J. (September 23, 2010). "Rail Crazy: Picatinny Rail Basics". Shooting Times.
  8. ^ a b "Dimensioning of accessory mounting rail for small arms weapons" (PDF). Archived from the original (PDF) on November 26, 2010.
  9. ^ "Ruger® Mini-14® Ranch Rifle Autoloading Rifle Model 5801". ruger.com. Retrieved September 17, 2020.
  10. ^ Brownells
Wikimedia Commons has media related to Picatinny rail.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Picatinny_rail&oldid=1063914513"