The International Alphabet of Sanskrit Transliteration (IAST) is a transliteration scheme that allows the lossless romanisation of Indic scripts as employed by Sanskrit and related Indic languages. It is based on a scheme that emerged during the 19th century from suggestions by Charles Trevelyan, William Jones, Monier Monier-Williams and other scholars, and formalised by the Transliteration Committee of the Geneva Oriental Congress, in September 1894.[1][2] IAST makes it possible for the reader to read the Indic text unambiguously, exactly as if it were in the original Indic script. It is this faithfulness to the original scripts that accounts for its continuing popularity amongst scholars.
International Alphabet of Sanskrit Transliteration IAST | |
---|---|
Script type | romanisation |
Time period | 19th century–present |
Languages | Sanskrit and other Indic Languages |
Usage
editScholars commonly use IAST in publications that cite textual material in Sanskrit, Pāḷi and other classical Indian languages.
IAST is also used for major e-text repositories such as SARIT, Muktabodha, GRETIL, and sanskritdocuments.org.
The IAST scheme represents more than a century of scholarly usage in books and journals on classical Indian studies. By contrast, the ISO 15919 standard for transliterating Indic scripts emerged in 2001 from the standards and library worlds. For the most part, ISO 15919 follows the IAST scheme, departing from it only in minor ways (e.g., ḷ/l̥ and ṛ/r̥)—see comparison below.
The Indian National Library at Kolkata romanization, intended for the romanisation of all Indic scripts, is an extension of IAST.
History
editThe Tenth International Congress of Orientalists, held at Geneva on 10 September 1894, adopted the following notations:[2][3]
a | ā | i | ī | u | ū | ṛ | ṝ | ḷ | l̤ | e | ai | o | au | |
k | kh | g | gh | ṅ | ||||||||||
c | ch | j | jh | ñ | ||||||||||
ṭ | ṭh | ḍ | ḍh | ṇ | ||||||||||
t | th | d | dh | n | ||||||||||
p | ph | b | bh | m | ||||||||||
y | r | l | v | ś | ṣ | s | h | ḻ | ṁ | m̐ | ||||
visarga | ḥ | |||||||||||||
jihvāmūlīya | ẖ | |||||||||||||
upadhmānīya | ḫ |
For the short e and o, the Committee also recommended the use of ĕ and ŏ, respectively.
Inventory and conventions
editThe IAST letters are listed with their Devanagari equivalents and phonetic values in IPA, valid for Sanskrit, Hindi and other modern languages that use Devanagari script, but some phonological changes have occurred:
Devanāgarī | Transcription | IPA | Category | |
---|---|---|---|---|
अ | a | A | ɐ | monophthongs |
आ | ā | Ā | aː | |
इ | i | I | ɪ | |
ई | ī | Ī | iː | |
उ | u | U | ʊ | |
ऊ | ū | Ū | uː | |
ऋ | ṛ | Ṛ | r̩ | syllabic liquids |
ॠ | ṝ | Ṝ | r̩ː | |
ऌ | ḷ | Ḷ | l̩ | |
ॡ | ḹ | Ḹ | l̩ː | |
ए | e | E | e | diphthongs |
ऐ | ai | Ai | ɐi̯ | |
ओ | o | O | o | |
औ | au | Au | ɐu̯ | |
ं | ṁ/ṃ | Ṁ/Ṃ | anusvara | |
ः | ḥ | Ḥ | visarga | |
ँ | m̐ | M̐ | chandrabindu[4] | |
ऽ | ' | avagraha |
velars | palatals | retroflexes | dentals | labials | Category |
---|---|---|---|---|---|
क k K |
च c C |
ट ṭ Ṭ |
त t T |
प p P |
tenuis stops |
ख kh Kh |
छ ch Ch |
ठ ṭh Ṭh |
थ th Th |
फ ph Ph |
aspirated stops |
ग g G |
ज j J |
ड ḍ Ḍ |
द d D |
ब b B |
voiced stops |
घ gh Gh |
झ jh Jh |
ढ ḍh Ḍh |
ध dh Dh |
भ bh Bh |
breathy-voiced stops |
ङ ṅ Ṅ |
ञ ñ Ñ |
ण ṇ Ṇ |
न n N |
म m M |
nasal stops |
ह h H* |
य y Y |
र r R |
ल l L |
व v V |
approximants |
श ś Ś |
ष ṣ Ṣ |
स s S |
sibilants | ||
ळ ḻ Ḻ |
approximants (Vedic)[2] |
* H is actually glottal, not velar.
Some letters are modified with diacritics: Long vowels are marked with an overline (often called a macron). Vocalic (syllabic) consonants, retroflexes and ṣ (/ʂ~ɕ~ʃ/) have an underdot. Two letters have an overdot: ṁ and ṅ (/ŋ/). One has an acute accent: ś (/ʃ/). One letter has a line below: ḻ (/ɭ/) (Vedic).
Unlike ASCII-only romanisations such as ITRANS or Harvard-Kyoto, the diacritics used for IAST allow capitalisation of proper names. The capital variants of letters never occurring word-initially (Ṁ Ṇ Ṅ Ñ Ṝ Ḹ) are useful only when writing in all-caps and in Pāṇini contexts for which the convention is to typeset the IT sounds as capital letters.
Comparison with ISO 15919
editFor the most part, IAST is a subset of ISO 15919 that merges the retroflex (underdotted) liquids with the vocalic ones (ringed below) and the short close-mid vowels with the long ones. The following seven exceptions are from the ISO standard accommodating an extended repertoire of symbols to allow transliteration of Devanāgarī and other Indic scripts, as used for languages other than Sanskrit.
Devanāgarī | IAST | ISO 15919 | Comment |
---|---|---|---|
ए / े | e | ē (e) | ISO e generally represents short ऎ / ॆ, but optionally represents long ए / े in the Devanagari, Bengali, Gurmukhi, Gujarati, and Odia scripts. |
ओ / ो | o | ō (o) | ISO o generally represents short ऒ / ॆ, but optionally represents long ओ / ो in the Devanagari, Bengali, Gurmukhi, Gujarati, and Odia scripts. |
ऎ / ॆ | ĕ | e | ISO e generally represents short ऎ / ॆ, but optionally represents long ए / े in the Devanagari, Bengali, Gurmukhi, Gujarati, and Odia scripts. The IAST ĕ represents short ऎ / ॆ. |
ऒ / ॆ | ŏ | o | ISO o generally represents short ऒ / ॆ, but optionally represents long ओ / ो in the Devanagari, Bengali, Gurmukhi, Gujarati, and Odia scripts. The IAST ŏ represents short ऒ / ॆ. |
अं / ं | ṃ | ṁ | ISO ṃ represents Gurmukhi tippi ੰ. The Tenth Geneva convention for IAST actually adopted ṁ. |
ऋ / ृ | ṛ | r̥ | ISO ṛ represents ड़ /ɽ/. |
ॠ / ॄ | ṝ | r̥̄ | for consistency with r̥. |
ऌ / ॢ | ḷ | l̥ | ISO ḷ represents ळ /𝼈/. |
ॡ / ॣ | ḹ | l̥̄ | for consistency with l̥. |
ळ | ḻ | ḷ | Used in Vedic Sanskrit only and not found in the Classical variant |
Computer input by alternative keyboard layout
editThe most convenient method of inputting romanized Sanskrit is by setting up an alternative keyboard layout. This allows one to hold a modifier key to type letters with diacritical marks. For example, alt+a = ā. How this is set up varies by operating system.
Linux/Unix and BSD desktop environments allow one to set up custom keyboard layouts and switch them by clicking a flag icon in the menu bar.
macOS One can use the pre-installed US International keyboard, or install Toshiya Unebe's Easy Unicode keyboard layout.
Microsoft Windows Windows also allows one to change keyboard layouts and set up additional custom keyboard mappings for IAST. This Pali keyboard installer[5] made by Microsoft Keyboard Layout Creator (MSKLC) supports IAST (works on Microsoft Windows up to at least version 10, can use Alt button on the right side of the keyboard instead of Ctrl+Alt combination).
Computer input by selection from a screen
editMany systems provide a way to select Unicode characters visually. ISO/IEC 14755 refers to this as a screen-selection entry method.
Microsoft Windows has provided a Unicode version of the Character Map program (find it by hitting ⊞ Win+R then type charmap
then hit ↵ Enter) since version NT 4.0 – appearing in the consumer edition since XP. This is limited to characters in the Basic Multilingual Plane (BMP). Characters are searchable by Unicode character name, and the table can be limited to a particular code block. More advanced third-party tools of the same type are also available (a notable freeware example is BabelMap).
macOS provides a "character palette" with much the same functionality, along with searching by related characters, glyph tables in a font, etc. It can be enabled in the input menu in the menu bar under System Preferences → International → Input Menu (or System Preferences → Language and Text → Input Sources) or can be viewed under Edit → Emoji & Symbols in many programs.
Equivalent tools – such as gucharmap (GNOME) or kcharselect (KDE) – exist on most Linux desktop environments.
Users of SCIM on Linux based platforms can also have the opportunity to install and use the sa-itrans-iast input handler which provides complete support for the ISO 15919 standard for the romanization of Indic languages as part of the m17n library.
Or user can use some Unicode characters in Latin-1 Supplement, Latin Extended-A, Latin Extended Additional and Combining Diarcritical Marks block to write IAST.
Font support
editThis section needs expansion. You can help by adding to it. (September 2016) |
Only certain fonts support all the Latin Unicode characters essential for the transliteration of Indic scripts according to the IAST and ISO 15919 standards.
For example, the Arial, Tahoma and Times New Roman font packages that come with Microsoft Office 2007 and later versions also support precomposed Unicode characters like ī.
Many other text fonts commonly used for book production may be lacking in support for one or more characters from this block. Accordingly, many academics working in the area of Sanskrit studies make use of free OpenType fonts such as FreeSerif or Gentium, both of which have complete support for the full repertoire of conjoined diacritics in the IAST character set. Released under the GNU FreeFont or SIL Open Font License, respectively, such fonts may be freely shared and do not require the person reading or editing a document to purchase proprietary software to make use of its associated fonts.
See also
editReferences
edit- ^ Monier-Williams, Monier (1899). A Sanskrit-English Dictionary (PDF). Oxford: Clarendon Press. pp. xxx.
- ^ a b c "Tenth International Congress of Orientalists, Held at Geneva". The Journal of the Royal Asiatic Society of Great Britain and Ireland: 879–892. 1895. JSTOR 25207765.
- ^ "Transliteration Report". 1896.
- ^ See, now, the Talk page, where m̐ is recommended.
- ^ "Pali Keyboard". fsnow.com. Retrieved 21 October 2019.
External links
edit- Reddy, Shashir. "Shashir's Notes: Modern Transcription of Sanskrit".
- "Mutlilingual keyboard".